Would the travel keyer/paddle from MFJ get the point across???
Richard Kent WD8AJG K2-5296
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
When and where are the SSB nets suppose to meet??
Richard Kent WD8AJG K2 5296
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
left
that has not seen a K3 in person.
Richard Kent WD8AJG K2 5296, K2 5996(almost)
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
of the band. Maybe this is a point that we have been to afraid to
ask (with good reason, the FCC scared me well). Maybe there was another
answer all along we did not know it. Maybe the popularity of the CB band has
dwindled to the point that it is not the hot spot we remember.
Still scared
Richard Kent
I have a KPA100 at the first test point. The K2 that I intend to use with it
is also at the first test point. Can I attach the KPA to this K2 and finish
the voltage tests in the KPA before installing the inductors and continuing
on??
Richard Kent WD8AJG
will be on the air 9 to 5 EDT
others maybe longer.
Tnx for the bandwidth
Richard Kent WD8AJG K2 5296
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc
resolution or
the sample rate, but a card capable of better will generally do better even
in the lesser mode.
Good Luck
Richard Kent
My own interest in the K3 is principally (but not exclusively) the
digimodes. For that reason I was interested in the suggestion of Simon,
HB9DRV that there might
. They are
also good if you need to remove an option for troubleshooting. Removing an
option usually disables the radio in some way requiring reinstalling parts
to make the radio work. I did not do the eliminators and wish I had.
Good luck and happy building
Richard Kent WD8AJG K2 5296 and 1/3 of 5996
I thought I heard or read that including an USB controller into a piece of
equipment requires one to pay a licensing fee to the organization that
maintains the USB definition. If this is true that could be why many devices
do not include USB compatibility. The cost may be too much for the number
While not an RF application. 75 ohm connector BNC and others are important
to the digital video production environment. It is my understanding that a
50 ohm barrel at the end of the correct length of coax will stop a digital
video signal. I am in the process of installing a new digital switcher
Hello Mike,
Don Wilhelm usually sees these requests. Until he sees it try
checking the cap values in the vco circuit mis-interpreting the value is a
source of the symptoms you have. Check soldering, Check soldering, Check
components and then soldering. Check bad soldering/tinning of t5. If
The K2 is my only low bands radio. I use at home and at scout camp for
demos. Phone and digital. Use it. It work well.
Rick Kent WD8AJG K2 5296
-Original Message-
I was just wondering how many here use SSB with their 15 watt K2? Does it
meet your expectations?
The reason I am asking
Having just finished my first K2 (#5945) I'm looking for
Jeff wrote,
I've looked through the manual and the list archives but don't find
too much in terms of details of this subject. If anyone is willing to
spell it out for me, that'd be great :)
On My K2 I installed a ground lug in the spot
tuned 2:1. Some bands (lower primarily) the power is reduced
to 2 watts and tuned up. Other bands it looks like it is tuning up at full
power. I had to wind T1 twice during the build and I am still not sure I
wound it properly. Any more thoughts and ideas??
Richard Kent K2 5296
to wait untill I am satisfied this is ok first.
Thanks in advance
Richard Kent WD8AJG K2 5296
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
/174 and terminated the coax.
I already use a BNC to banana plug adaptor for my voltmeter for other
reasons. This just made the probe compatible with my system. However, this
does make for a solid connection.
Richard Kent WD8AJG K2 5296
___
Elecraft
I have been using a Kenwood MC80 with my K2. I use batteries, but I have
been told that the mic. will power with 5 volts. The mic. does have a
gain/level control that can be used to dial in the right level.
Richard Kent WD8AJG K2 5296
Bill wrote,
I should also mention that I am getting ALC
I was reading about KPA100 shield upgrade. I noticed the speaker shield and
was wondering if there was any benefit to a K2? Especially one without the
vco shield mod? Any thoughts??
Richard Kent K2 5296
___
Elecraft mailing list
Post to: Elecraft
. My K2 will be the Digital Station.
Listen for and Work some of the kids.
Thanks for the Bandwidth
Richard Kent, WD8AJG K2 5296
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info
sleeping and eating times excluded. I was planning to
use the jamboree (JOTA) freqs as a starting point. There appear to be three
contest/QSO parties this weekend. SSB and FM will be the modes. Digital was
planned but I could not get the interface to work in time.
Richard Kent
3940, 7270, 14290, 21360, 28390 are the SSB suggested frequencies.
Most of the time will be spent on 80, 40, 20. I will check 15 and 10 for
openings throughout the day. Last time I was at camp with a radio there was
a nice opening on 10. Akron OH to Phoenix on about 1 watt SSB.
Richard Kent
. Something to think about.
Richard Kent, WD8AJG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Before you send it off. Check the diodes. I installed 1 backwards and got
the same issues. I am referring to the switching diodes on both ends of the
crystal filter.
Richard Kent, WD8AJG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
in
scouting, baseball, and band. Daughters in college. Cars to fix. Need I
continue. I guess I would like to know what the caveats are to the separate
box solution. Any ideas?? Any other ideas not mentioned?? Thanks in
advanced.
Richard Kent, WD8AJG
and got strange sounding receive audio and no transmit signal. I could see
depending which diode is wrong your symptoms would appear. There are 8
diodes to choose from (I think). Also check the usual solder bridges,
etc There maybe other causes someone else may help if that is the case.
Richard Kent
Thanks for the Idea. This might Help at Jamboree on the Air setups.
Richard Kent
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Tom Hammond
Sent: Monday, June 12, 2006 10:25 AM
To: Dan KB6NU; elecraft@mailman.qth.net
Subject: [Elecraft] OT - 30-foot
.
Richard Kent WD8AJG
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of ron
Sent: Thursday, June 01, 2006 11:43 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] 10 meters
There must be many of you on this reflectah who must know:
where does one listen
??
Richard Kent WD8AJG K2 #5296
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Last week there was a thread about this. Leaving the probe in increased some
spurs in the transmitter output. Values were not given, but it sounds
removing it is the better idea. When you are done tweaking the filters take
it out.
Rick WD8AJG K2 #5296
-Original Message-
From: [EMAIL
readings follow the knob setting +or- a small amount. My readings were not
as varied as the other builder's radio. Do I need to look into this
further???
Richard Kent
WD8AJG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
30 matches
Mail list logo
