Re: [Elecraft] Duty on warranty repairs

I would again like to extend a thank you to all replied. I have for sure learned a lot about sending a rig for repair overt the boarder. Thanks again for all of you who took time to reply! 73, Mike VE3WDM -- Sent from: http://elecraft.365791.n2.nabble.com

Re: [Elecraft] Duty on warranty repairs

Gentlemen thanks very much for all your input very much appreciated. 73, Mike VE3WDM -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

Re: [Elecraft] K-POD labels

-today.htm Above is a link to my blog that shows a shot of the K-pod with the magnetic labels. 73 Mike VE3WDM -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo

Re: [Elecraft] K3 station for sale

The K3 has been sold. Mike VE3WDM -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft

Re: [Elecraft] [K3] Ballistic tuning and other feature musings

Ballistic tuning would be a great addition if possible via a software update and as for the board level modifications I too have been waiting for the same. Mike VE3WDM -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft

Re: [Elecraft] FS: K3DSPLPF

I will take it if still available? Mike VE3WDM -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post

Re: [Elecraft] Adding Sub receiver in K3

Thank very much for the fast feedback Mike VE3WDM -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post

Re: [Elecraft] K3 filters available

Hi Ken, I was just looking for the 500hz and 8 pole. Mike -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm

Re: [Elecraft] P3 TXMON for sale

The PX3MON has been sold. Mike Weir VE3WDM -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-TXMON-for-sale-tp7629850p7629858.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing

Re: [Elecraft] P3 TXMON for sale

The TXMON has been sold Mike VE3WDM -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-TXMON-for-sale-tp7629850p7629901.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list

Re: [Elecraft] For sale KX3 KXPD3 key

The KXPD3 key has been sold. Mike VE3WDM -- View this message in context: http://elecraft.365791.n2.nabble.com/For-sale-KX3-KXPD3-key-tp7629851p7629900.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft

Re: [Elecraft] K3 error message

Hi Don thanks for the info, seems it is within the program but when I run it inside Win4 K3 suite all goes well. I will have to compare setting with the stand alone program to that of the one running in Win4 K3 suite. Mike VE3WDM -- View this message in context: http://elecraft.365791.n2

Re: [Elecraft] K-pod issue....I think?

Tony send me your macro I will try it see how it operates and see if we can solve this issue. Email is ve3...@hotmail.com 73, Mike -- View this message in context: http://elecraft.365791.n2.nabble.com/K-pod-issue-I-think-tp7625757p7625768.html Sent from the Elecraft mailing list archive at

Re: [Elecraft] K-pod issue....I think?

Thanks Mike I will try a longer tap. 73, Mike VE3WDM -- View this message in context: http://elecraft.365791.n2.nabble.com/K-pod-issue-I-think-tp7625757p7625767.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] Macro for text decode

I would like to thank you all for the input and it was very interesting seeing the solution come together as I read the posts. Thanks to all of you for your time 73, Mike VE3WDM -- View this message in context: http://elecraft.365791.n2.nabble.com/Macro-for-text-decode-tp7625454p7625472

Re: [Elecraft] Help with macro for spot funtion.

Thanks all very much for the help the issue has been solved. 73, VE3WDM Mike -- View this message in context: http://elecraft.365791.n2.nabble.com/Help-with-macro-for-spot-funtion-tp7625114p7625143.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] KDSP2 discontinued??

Ok thanks Don. Mike VE3WDM -- View this message in context: http://elecraft.365791.n2.nabble.com/KDSP2-discontinued-tp7624893p7624909.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home

Re: [Elecraft] SWR issue with K3

ng it from the outlet on the balcony. 73 Mike VE3WDM -- View this message in context: http://elecraft.365791.n2.nabble.com/SWR-issue-with-K3-tp7624316p7624363.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft ma

Re: [Elecraft] FS Alexloop Walkham antenna

Good evening everyone, the Alexloop has been sold but thanks for all the replies. Mike VE3WDM -- View this message in context: http://elecraft.365791.n2.nabble.com/FS-Alexloop-Walkham-antenna-tp7605490p7605506.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] Items up for sale

The LP Pan and E MU 0202, rigrunner 4005 and QRPometer have been sold Mike VE3WDM -- View this message in context: http://elecraft.365791.n2.nabble.com/Items-up-for-sale-tp7598411p7598752.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] KX3 error message

Thanks very much Don I will check that out. Mike -- View this message in context: http://elecraft.365791.n2.nabble.com/KX3-error-message-tp7592140p7592198.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft

Re: [Elecraft] For sale DL-1 Dummy load

The DL-1 has been sold. Mike VE3WDM -- View this message in context: http://elecraft.365791.n2.nabble.com/For-sale-DL-1-Dummy-load-tp7591853p7591895.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing

Re: [Elecraft] For sale XG-3

The XG3 has been sold Mike VE3WDM -- View this message in context: http://elecraft.365791.n2.nabble.com/For-sale-XG-3-tp7591851p7591862.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home

Re: [Elecraft] LF engineering H-900 active antenna for sale

The antenna has been sold Mike VE3WDM -- View this message in context: http://elecraft.365791.n2.nabble.com/LF-engineering-H-900-active-antenna-for-sale-tp7578961p7579250.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] For sale LDG 6 position antenna switch

The LDG antenna switch has been sold. Mike VE3WDM -- View this message in context: http://elecraft.365791.n2.nabble.com/For-sale-LDG-6-position-antenna-switch-tp7579222p7579249.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] KRX3 and filters for sale

The KRX3 has been sold Mike VE3WDM -- View this message in context: http://elecraft.365791.n2.nabble.com/KRX3-and-filters-for-sale-tp7578933p7579251.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing

Re: [Elecraft] KRX3 and filters for sale

The KRX3 has been sold Mike VE3WDM -- View this message in context: http://elecraft.365791.n2.nabble.com/KRX3-and-filters-for-sale-tp7578933p7578935.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing

Re: [Elecraft] Using the k3 for WSPR

Thanks very much for all your input and personal emailsthe fog has cleared and it makes sense to me now. Mike VE3WDM -- View this message in context: http://elecraft.365791.n2.nabble.com/Using-the-k3-for-WSPR-tp7578461p7578497.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] K2 alignment and test part 2

Don thanks very much for taking the time to get back to me and I will use the scope for the procedures you indicated. Mike -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-alignment-and-test-part-2-tp7577391p7577395.html Sent from the Elecraft mailing list archive at

Re: [Elecraft] K2 for sale with Link update.

The package has been sold. Mike -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-for-sale-with-Link-update-tp7575594p7575635.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing

Re: [Elecraft] K2 for sale with Link update.

The package has been sold Mike -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-for-sale-with-Link-update-tp7575594p7575636.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing

Re: [Elecraft] K2 meter alignment issue

Good morning Don, I check the voltages on my K2 last night and here are the results. I set my AGC back to 3.746 from the 3.80 this way I could compare your results to mine. With RF gain set to clockwise or full. My voltage readings are to the right of yours. U2 pin 5 -- 3.74 volts 3.05

Re: [Elecraft] K2 meter alignment issue

Don just by way of update, I have now tried again to do the CAL S LOW and CAL S HI here are the results. The CAL S LOW reading is now at 164 The CAL S HIreading is now at 23 Some odd things that have happened. 1. I adjusted R1 to get a voltage at U2 pin 5 of 3.80 volts. When this was done I

Re: [Elecraft] K2 meter alignment issue

Don just wanted to say thanks very much for your time in assisting me getting to the bottom of the problem. Mike -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-meter-alignment-issue-tp7574472p7574645.html Sent from the Elecraft mailing list archive at Nabble.com.

Re: [Elecraft] K2 meter alignment issue

LO the value at which the first bar goes out is 255 and comes back on at 000 As for CAL S HI I am not able to get any of the bars on the meter to light up so I do not have a value for you. Thank very again for your time. Mike VE3WDM -- View this message in context: http://elecraft.365791.n2

Re: [Elecraft] Resistance checks on RF board page 38

side and get reading of .02 ohms...this is good 2. From same position on R1 again to other side of C1 and get OL. 3. I then go from the same position on R1 again to ground and again get OL. Not sure where to go next Don. Mike VE3WDM -- View this message in context: http://elecraft.365791

Re: [Elecraft] Clearing KX3 ATU memory

Thanks very much Don it worked great. Mike -- View this message in context: http://elecraft.365791.n2.nabble.com/Clearing-KX3-ATU-memory-tp7573435p7573452.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft

Re: [Elecraft] Clearing KX3 ATU memory

Good afternoon Ralf, just tried it and could not find the CLR option in the ATU MD menu. Mike VE3WDM -- View this message in context: http://elecraft.365791.n2.nabble.com/Clearing-KX3-ATU-memory-tp7573435p7573439.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] P3 point and click with mouse

the contest. I have 3 24 inch flat screen monitors. One for the P3, one for the contest programs and the final monitor for MRP40 CW decode (for the 40wpm plus contesters), Google and so on. I hope those at Elecraft consider this idea. Mike VE3WDM -- View this message in context: http://elecraft

Re: [Elecraft] KX3 has a ping noise

Hi Dave thanks for taking the time to get back to me. I thought the same but it also does in with the dummy load as well with the power set at 0. Mike -- View this message in context: http://elecraft.365791.n2.nabble.com/KX3-has-a-ping-noise-tp7573175p7573180.html Sent from the Elecraft

Re: [Elecraft] KX3 has a ping noise

It's all figured outI had dual watch on (not sure how that happened) it seemed when VFO B was close to VFO A then the ping effect happened. Turned off dual watch and all is well now. Mike -- View this message in context:

Re: [Elecraft] K2 Control board check out

Don, I will try that this evening to see how it goes. Thanks very much for taking the time to email. Mike VE3WDM P.S if there is any odd readings will post for further instructions. -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-Control-board-check-out

Re: [Elecraft] LogiKit CMOS-4 keyer FS

The item has been sold. Mike VE3WDM -- View this message in context: http://elecraft.365791.n2.nabble.com/LogiKit-CMOS-4-keyer-FS-tp7569531p7569537.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing

Re: [Elecraft] KXBC3 charging

Good evening all. I believe I solved the problem I had put the rig on charge (so I thought) last night for 16 hours. Once I turned the rig off the LCD just went to it's normal black screen. After posting my question I wanted to try a 4 hour charge and once the rig was shut off the display light up

Re: [Elecraft] No CW decode on K3 or P3

Thanks for the group for all your help not sure what was going on but I downloaded the Beta version and all is working great now. May had been playing in the K3 menus one day and did something...but all is well now. Thanks to all who replied with their help. Mike VE3WDM -- View this message

Re: [Elecraft] soldering SMD's

I wanted to take a moment to thank all who gave me great feedback on my SMD question. Lots of great suggestions, web links and Youtube suggestions. I am now able to tackle the SMD boogieman and I am hoping that these posts will also assist others who come to the group with similar questions about

Re: [Elecraft] Am I the only one not getting the KX3 trans bias cal test???

with the K3 or KX3 the rig seems to come to a definite end and the bias test seems to keep running. Sorry if my post sound a bit aggressive but I was getting frustrated with the test. I apologize to the group for sounding off. Mike VE3WDM -- View this message in context: http://elecraft.365791

Re: [Elecraft] Leftover parts after KX3 build???

Good morning Don, Thanks for the reply and the only reason alarm bells went off regarding these washers there were only 2 shipped and then seemed a little oversized and unique. So that made me wonder if they were to go somewhere on the KX3 build or not. It was not like there was 6 of them and 2

Re: [Elecraft] NEW PRICE on Pelican 1200 case

The Pelican case has been sold. Mike VE3WDM -- View this message in context: http://elecraft.365791.n2.nabble.com/NEW-PRICE-on-Pelican-1200-case-tp7562766p7562767.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] Pelican 1200 black case for sale

The case has been sold. Mike VE3WDM -- View this message in context: http://elecraft.365791.n2.nabble.com/Pelican-1200-black-case-for-sale-tp7562651p7562655.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] Elecraft KX3 and Mac

I want to thank all who posted their comments here and also those who emailed me off list. Great input and it seems that Rumlog and Rumped is the way to go. There was also some feedback about crossover and using some windows programs for contesting. Thanks all Mike VE3WDM -- View this message

Re: [Elecraft] FS LDG DTS-6 coax switch

The DST-6 switch has been sold thanks for all the replies. Mike VE3WDM -- View this message in context: http://elecraft.365791.n2.nabble.com/FS-LDG-DTS-6-coax-switch-tp7560388p7560404.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] KX1 package for sale

The KX1 package has been sold thanks to all who emailed regarding it. Mike -- View this message in context: http://elecraft.365791.n2.nabble.com/KX1-package-for-sale-tp7560298p7560313.html Sent from the Elecraft mailing list archive at Nabble.com.

Re: [Elecraft] KX1 package for sale

The signalink USB unit is now sold as well. Mike VE3WDM -- View this message in context: http://elecraft.365791.n2.nabble.com/KX1-package-for-sale-tp7560298p7560325.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] How do you go back to older firmware release.

Good afternoon Roger just wanted to thank you for the settings they work great!! I was had some time in the IOTA contest and the decode was working better than it has been in the past even before the software up grade. Thanks again for your time Mike VE3WDM -- View this message in context

Re: [Elecraft] K3 not loading MCU 4.48

and all worked well doing that so I just tried the same in the K3 Utility. Thanks again for all your input. Mike VE3WDM -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-not-loading-MCU-4-48-tp7507483p7509582.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] P3 cursor position

VE3WDM -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-cursor-position-tp7491818p7492992.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman

Re: [Elecraft] KAT2 C55 nul adjustment

Good morning Don, thanks very much for taking the time to respond. Good to know the C55 cal is in spec. As for the SWR sorry for the confusion but I am getting as the book says 1.1 SWR and on some bands 1.5so all is well I would assume? Mike VE3WDM -- View this message in context: http

Re: [Elecraft] K3 KAT3 vs K2 KAT100

back to me. Mike VE3WDM -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-KAT3-vs-K2-KAT100-tp7451003p7455578.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http

Re: [Elecraft] For sale LP-Pan and Emu 0202

Thanks all for the interest the LP-Pan and sound card are no longer available. Mike VE3WDM -- View this message in context: http://elecraft.365791.n2.nabble.com/For-sale-LP-Pan-and-Emu-0202-tp7050182p7060392.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] KPA100 and KAT100 remote mounting

Don thanks very much for the information. I was wondering if the part number you supplied was an Elecraft number? If so I will request that when I put my next order into elecraft. If I decide to go with winding my own toroid what gauge of wire do you suggest to use? Mike VE3WDM -- View

Re: [Elecraft] Filters for the KBPF3

Thanks everyone for the input I placed my order last night along with the KBPF3 I also order the 8 pole 6khz filter as well. Thanks again for the input. Mike VE3WDM -- View this message in context: http://elecraft.365791.n2.nabble.com/Filters-for-the-KBPF3-tp6683443p6685264.html Sent from

Re: [Elecraft] Fine tuning AF1

Good morning Ron, Yes the antenna is attached to the KX1 so it is as close as it can be to the rig. Yes the Miracle whip is just that a great convenience over the long wire. I have not tried the counterpoise but I do have one and the next time I am out on my deck I will give it a go and see how it

Re: [Elecraft] FS KXPD1 and KXB30

The items have been soldthanks all who replied back but sorry they were gone. Mike-- View this message in context: http://elecraft.365791.n2.nabble.com/FS-KXPD1-and-KXB30-tp6322238p6322342.html Sent from the Elecraft mailing list archive at Nabble.com.

Re: [Elecraft] Rework Eliminators

. If interested contact me off the list. Mike VE3WDM ve3...@hotmail.com http://ve3wdm.blogspot.com -- View this message in context: http://elecraft.365791.n2.nabble.com/Rework-Eliminators-tp6209594p6210816.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] K3 and MFJ 1026 hookup

Here is something I was also wondering could I utilize the AUX on the sub receiver with the MFJ 1026 either along side the KXV3A in out connections? The reason for asking this is I use diversity receive and was not sure if I could incorporate the MFJ unit as well? Thanks Mike VE3WDM -- View

Re: [Elecraft] K3 and MFJ 1026 hookup

That great Vic thanks very much, one last question...Am I able to use the MFJ's internal antenna with this setup or do I have to hook up via the ext receiving antenna only on the MFJ unit? Thanks Mike VE3WDM -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-and-MFJ-1026

Re: [Elecraft] K3 and MFJ 1026 hookup

Thanks again Vic, no problem with power here it's always QRP or max 10 watts. Mike VE3WDM -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-and-MFJ-1026-hookup-tp5972691p5973310.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] K2 KPA100 tests

load are the only pieces of equipment that are connected when I do the power readings. At this time there are some LDG antenna switches and extra coax as well. Mike VE3WDM -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-KPA100-tests-tp5760475p5774671.html Sent from

Re: [Elecraft] K2 KPA100 tests

wanted to know if the KDSP2 was installed and it is. Does any of this help with the chirp noise? Mike VE3WDM -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-KPA100-tests-tp5760475p5775520.html Sent from the [K2] mailing list archive at Nabble.com

Re: [Elecraft] K2 KPA100 tests

and I had sent it down to Larry for calibration. Now having said that I meter does go through 2 LDG antenna switches before the rig. So I am on the weekend going to remove them and just have the rig and dummy load between the watt meter and see how it goes from there. Mike VE3WDM -- View

Re: [Elecraft] KPA100 fan test

Thanks very much DonWeird thought that was what I was doing but seems not. I did as you said and all checked out with the fan speed just fine. Now it is on the the Bias currant adjustment going to use an DMM for this oneI have a Fluke that can be configured for 10 amps the other options is

[Elecraft] KRX3 diversity receive

I have installed the KRX3 and set it up with a separate antenna from Ant 3 at the rear or the K3. The diversity antenna is a dipole and the main antenna is a vertical. The meneu settings are as follows 1. ANT=BNC 2. KAYN3 has been calibrated. 3. SPKRS is set to 2 as I use headphones. 4. I used

[Elecraft] Diversity and RX ANT button

for transmit and the dipole for receive? Sorry for all the KRX3 questions but taking advantage of the holiday to get familiar with the operation rather than during a contest. Mike VE3WDM -- View this message in context: http://elecraft.365791.n2.nabble.com/Diversity-and-RX-ANT-button-tp5623553p5623553

Re: [Elecraft] Band selection

Thanks very much Wayne just set up the K3 they way you said works great and nice to not have to toggle through the bands...now is there a way to also set up the KRX3 the same way as the main? -- View this message in context:

Re: [Elecraft] KRX3

Don' Have I changed any of the synthesizer settings when I rotated the VFO knob earlier and changed the RF settings. I was not sure if I also changed the NOR setting in this menu either? But I hope with the MD setting to off nothing was changed. -- View this message in context:

Re: [Elecraft] KRX3

Don and Guy, Thanks very much for the help I re-did the synthesizer cal for the main receiver and then did the sub receiver. I then went into the K3 utility and did the RF gain calibration for both main and sub receivers.Oh and also entered the filter data for the sub as well. All is going FB and

Re: [Elecraft] KRX3 band pass filters needed?

was talking to Gary at Elecraft and he suggested others have used model 197 or 197 RF Limiter / receiver protect by Iceproducts. I will look into that too and this COR relay is it a very noticeable clicking if it was to be activated? Mike VE3WDM -- View this message in context: http://elecraft

Re: [Elecraft] K2 assembly

were worth a thousand words. Go to the Elecraft site, go to builders resources you will see a link step by step K2 assembly pictures. This site helped me out lots when the manual was just not making sense. Good luck with the build Mike VE3WDM http://ve3wdm.blogspot.com http://ve3wdm.blogspot.com

Re: [Elecraft] IMac pro RFI

Good afternoon all, just wanted to pass along the RFI problem to Julie's IMac has been solved. Due to the over whelming suggestions that it could be the Apple mouse it turns out that was the source of my trouble. The mouse has been replaced and all is well. I was emailing most if not all of you

Re: [Elecraft] IMac pro RFI

Hi George Sorry no ups here but I really should pick one up just in case of an outage. Any other step. -- View this message in context: http://elecraft.365791.n2.nabble.com/IMac-pro-RFI-tp5454871p5454901.html Sent from the Elecraft mailing list archive at Nabble.com.

Re: [Elecraft] KPA100 resistance checks

Thanks very much for the reply Don. Mike VE3WDM -- View this message in context: http://elecraft.365791.n2.nabble.com/KPA100-resistance-checks-tp5425789p5427424.html Sent from the [K2] mailing list archive at Nabble.com. __ Elecraft

[Elecraft] k3EZ

XP sp3 and the computer is a AMD 3ghz with 8 gigs of ram. I have NET FRAME 3.5 installed as well. Thanks for any help Mike VE3WDM -- View this message in context: http://n2.nabble.com/k3EZ-tp4531452p4531452.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] [K3] K3 Leftside panel

and on the left side panel where the handle goes my panel has 3 extra holes?? In the center of the panel just above the handle. I can't see these holes in the parts pic for the left panel, is this ok?? Mike VE3WDM __ Elecraft mailing list