Wonder if by chance anyone may have an unbuilt T1 Antenna Tuner tucked
away they aren't going to build - if so I'm looking for one.
Please contact me off list
Dan - KI4YZE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
If you have one for sale I'm looking for one - please contact directly.
Thanks Much
Dan - KI4YZE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
shipping costs if
anyone interested please contact me off list or call me on my cell.
Thanks much
Dan - KI4YZE
Cellphone = 770-377-6000
Email = dan.boardman AT shreditfast.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
I just hate the new Verizon email format. Here I go again!
My K2 has developed a warping issue. Recently completed and finally totally
assembled the unit does not set flat on the desk or stand. It wobbles. I have
loosened the 3d connector screws, set heavy books on the rig on a marble top
Hello all,
I have completed the assembly of my kat2 and am at the testing phase. The
question is: I hear relay clicking when going thru the display settings for
L0-L8, C0-C8, N1 N2, but NOT for
CALn,CALP, CALS, AUTO, ALT and POUT. Is this normal?
Thanks in advance
73
Dan
Daniel Grizzard
Extra
the torroid?
73
Dan
Daniel Grizzard
Extra Class
af4lb
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
size. Any suggestions?
Secondly, thetwo trimmer potentiometers are listed at 100k but 150k was
shipped. A problem?
73 all
Dan
Daniel Grizzard
Extra Class
af4lb
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
I have my K2 up and running nicely now for several months and now want to build
and install my ssb and automatic tuner modules. Any suggestions which to do
first?
I don't want to have to remove one to install the other.
73
Dan
Daniel Grizzard
Extra Class
af4lb
Not trying to start another thread here, but here is just ONE example of why
Elecraft continues to use the RS-232 I/O. Gee, Win7 has been out quite a
while.
This from the IC-7600 reflector:
Dan -- N3ND
1a. Re: Silicon Labs CP210x USB to UART Bridge driver
Posted by: Cameron Platts
is it easily configurable with it's convoluted algorithm scheme nor is
the resultant QoS as clean.
My opinion only; YMMV.
73,
Dan -- N3ND
Date: Sun, 28 Nov 2010 16:27:56 -0500
From: Roy Morris w4...@carolina.rr.com
Subject: [Elecraft] K3 Noise Reduction Performance
To: elecraft
anything.
Dan N0DT
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Mike
Sent: Thursday, November 18, 2010 6:51 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3: USB port
I'm not sure how you envision moving the audio
power-on and
power-off. Just my opinion.
Dan -- N3ND
-Original Message-
From: Bill VanAlstyne W5WVO w5...@cybermesa.net
To: [Elecraft] elecraft@mailman.qth.net
Sent: Wed, Oct 6, 2010 2:19 pm
Subject: [Elecraft] [K3] Speaker output amp kaput
I recently fried (I believe
Repeat after me.
I will never again run a RTTY Contest without a P3.
Dan -- N3ND
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
Same issue here. Happened twice during the contest. No known reason for
occurrence as I had not touched the radio - except it went from TX to RX on a
frequency a short way away. FSK D mode.
Dan -- N3ND
-Original Message-
From: Richard Ferch ve3...@storm.ca
To: elecraft
these new front cabinet panels went into production, the silk
screen for Select, TAP=QSY was lowered (accidentally?) and it is now
partially covered by the knob. It's just a visual oddity and my only complaint
with this superb product.
Dan -- N3ND
-Original Message-
From: Gary
interesting that yours is
not.
Dan -- N3ND
-Original Message-
From: Bob Cunnings bob.cunni...@gmail.com
To: elecraft@mailman.qth.net
Cc: Dan Atchison n...@aol.com
Sent: Sun, Sep 19, 2010 12:45 pm
Subject: Re: [Elecraft] P3: QSY knob mod (front panel)
Interesting. I have P3 #74
Then I have a one of a kind. How lucky am I and who want's to buy it for $2K?
Dan -- N3ND
-Original Message-
From: Ken Kopp k...@rfwave.net
To: bob.cunni...@gmail.com; elecraft@mailman.qth.net; Dan Atchison
n...@aol.com
Sent: Sun, Sep 19, 2010 2:31 pm
Subject: [Elecraft
Awaiting Elecraft support answer at this point. Thanks for help so far.
Dan NM3A
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Can-t-seem-to-make-LINE-OUT-work-properly-tp3888248p5530397.html
Sent from the [K3] mailing list archive at Nabble.com
And, I'm sure the P3 communicates with the K3 for a reason. Why would you
want to communicate at a lower speed, anyway?
Dan -- N3ND
-Original Message-
From: Dick Dievendorff die...@comcast.net
To: 'Dick Dievendorff' die...@comcast.net; 'Dick Grolleman'
groll...@planet.nl
, not something
plugged into it.
I recorded the LINE-OUT from the K3 and it is working as spec'd. No issue
with the K3 at all, just operator error! Thanks again Joe! Issue resolved.
Dan NM3A
Check your soundcard. This report pops up occasionally and the
user has a microphone/VoIP headset plugged
I am having the same problem. Hooked up to Line Out, set LIN OUT = nor 010,
but line output still dependent on AF gain setting. Only have main RX, not
SUB installed.
Works well with fl Digi, but must set AF gain for it to work.
Anyone else have any ideas?
Dan, NM3A
Denis Jackson-2 wrote
what this is or why it says
this. Is this relevant to the question?
Dan NM3A
-Original Message-
From: Don Wilhelm w3...@embarqmail.com
To: Dan n...@mail.com
Cc: elecraft@mailman.qth.net
Sent: Mon, Sep 13, 2010 12:01 am
Subject: Re: [Elecraft] K3 - Can't seem to make LINE-OUT work
Yeah, but . . . . . . . .
We've accepted this for years, reference ETO and Alpha Amplifiers.
And yes, I am a yuppie.
Dan -- N3ND
-Original Message-
From: Joe Subich, W4TV li...@subich.com
To: elecraft@mailman.qth.net
Sent: Thu, Sep 9, 2010 11:28 am
Subject: Re: [Elecraft
was then about to Auto Tune to
a 1:1 SWR.
So, the question is why? Does the Clear settings function not work?
Dan -- N3ND
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
IM THINKING OF ADDING THE 100W AMP TO MY K2 SR# 6324... CAN SOMEONE EDIFY ME
ON IT. I BOUGHT THE K2 ALREADY ASSEMBLED .. NEAT RIG... BUT WOULD LIKE A
LITTLE MORE JUICE ONCE IN A WHILE... AM I RIGHT THAT:1. I WILL NEED A PWR
SUPPLY ..I IMAGINE THE ANSWER TO THAT IS OBVIOUS OF COURSE.
/bolt if removed, altho some (epoxy) types are
designed to be removeable after heating to 400 degrees.
Dan NM3A
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Handle-replacement-on-K3-tp5449432p5453005.html
Sent from the Elecraft mailing list archive at Nabble.com
, and better audio would not diminish the appeal of this
magnificent radio, but would enhance it; and would reward Elecraft with an
excellent market share.
Dan
On Mon, Aug 9, 2010 at 1:23 PM, Nicholas Farrar nfar...@bfpacs.com wrote:
Count me in. Basically it would be the same guts with a new
than prior
renderings.
Oh, and what were the other things I thought I'd dislike about the K3? Darn if
I remember.
Dan -- N3ND
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Iain:
I missed that. It's even easier than I thought. Many thanks!
Dan -- N3ND
-Original Message-
From: Iain MacDonnell - N6ML a...@dseven.org
To: Dan Atchison n...@aol.com
Cc: btipp...@alum.mit.edu; elecraft@mailman.qth.net
Sent: Wed, Aug 4, 2010 11:02 pm
Subject: Re
). The
re-mapped key I use (on my keyboard) is the tilde (~) key immediately below the
ESC key. Took no time to get used to.
And, as already mentioned, the audio is outstanding.
Dan -- N3ND
-Original Message-
From: Bill W4ZV btipp...@alum.mit.edu
To: elecraft@mailman.qth.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Hello all.
I have gotten my K2 assembled and stated aligning the filters using Spectogram
and the VFO stopped working. I reworked any suspicious
solder joints to no avail. I discovered with the help of a friend with a scope
that the encoder had failed. I replaced the encoder
and discovered I
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
and Q19. Q18 G voltage rated -1.0= actual -.001 S was
OK=D rated 6.3= actual 8.3. Q19 G rated 0.0= actual -.4==S rated 0.8=actual
1.7==D was ok at 8.0 vdc. Q20 checked out ok. Here I stopped and asking for
suggestions.
Thanks in advance.
Dan af4lb
NOTE==Q5 needed to be checked with the bottom
This weekend, an all Elecraft IOTA contest excursion to NA-067 Core
Banks, NC will activate N4A during the competition. K3 and K2 versions
will be used. Please give us a shout!!
73,
Dan -- N3ND
__
Elecraft mailing list
Home: http
Lyle wrote: Low risk way to evaluate a lot of the technology for the KX2 and
possibly the K4 IF section (QSD/QSE, no tune BPF and LPF, Si570 Synth,
switching regulator
A K4 in the worksPlease tell me more :-)
__
Elecraft mailing
a glitch. This particular
rig was used on all bands except 40M CW, in which another K3 was used.
Gotta love it.
Dan -- N3ND
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
an
awl or other tool to remove them! Again, if they're assembled
correctly, . . . . . .
Dan -- N3ND
BTW, Field Day (NR3X), Class 3A, two K3's, one K2. Is there any other
rig?
That way, the connector: (1) becomes square in shape, instead of a
thin
rectangle that's prone
Wow, what was that? Took me 30 minutes to refresh as opposed to a
normal 8 minutes. Has anything changed in the upload procedure?
Dan -- N3ND
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
and inspect the front panel board and
reworked those joints looking suspicious but it did not help.
Thanks in advance for your input.
73
Dan af4lb
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
of which I have
two, one each for the main unit and subRX (page 50).?
Are there any upgrade mods available to get these?
Dan -- N3ND
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Hello all,
I have recently completed my K2 alignment and finished assembling the top cover
and installing it.
I find I have very low audio from my speaker and must be within a foot or so to
hear it. Both the front and rear
speaker jacks have plenty volume using earphones. Any suggestions?
73
Dan
one with this small issue?
73,
Dan -- N3ND
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
that before I spoke.
73,
Dan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
10.3
out
All power at the 2 watt output setting was adjustable at the designated pots or
capacitors.
The rig had 13 vdc input and transmitting into a 50 ohm dummy load.
Looking forward to suggestions.
73
Dan
af4lb
I power up the rig again. I
really do not want to fry my new parts!
73
Dan
af4lb
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Thanks to those who responded.
73,
Dan - W4TQ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Hello all,
Is there a way to check the PA transisters in my K2 safely while still
installed?
Thanks in advance.
Dan
af4lb
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
, and packing materials
are included.
I'm located near Dunnellon, Florida (about 70 miles north of Tampa). I would
be glad to demonstrate the rig to someone interested in purchasing.
Email me at:
dml...@gmail.com
Dan Long - W4TQ
__
Elecraft
this before?
Thanks,
Dan - W4TQ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please
I am looking for an LP-PAN/E-MU 0202 setup.
Anyone want to sell theirs to fund the P-3?
Let me know what you have and what you want
For it.
Thanks
Dan N0DT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
of hearing the noise.
With the AGC on, as the RF gain was advance, I heard the noise well in
advance of hearing the signal.
I repeated this test on many signals, with the same results.
Dan- W4TQ
__
Elecraft mailing list
Home: http
Hello
I've measured K2's RX noise level (antenna terminated on 50 ohm, AGC OFF, AF
and RF to max,
DMM connected to P5), when PRE is ON N = 0.055v, PRE is OFF N = 0.013v.
Are those levels OK for K2?
Thanks
Sergey.
--
View this message in context:
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
I have an Astron SS-30 power supply that was
Only used for 4 months for sale. I would take
$90 + shipping. I have switched to solar.
Thanks
Dan N0DT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
Hi Earl,
Interesting post. I had not previously seen these speakers.
Their website advertises them as computer speakers, which are impervious to
RF. If I understand you correctly, however, you use them as external
speakers for your K3.
Thanks,
Dan - W4TQ
Nice summary Bill. Will you please share the AGC setting that you most
typically use?
Thanks,
Dan - W4TQ
...
Hello all!
I have read the many comments upon the noisy K3 receiver with interest. I,
too, have always thought the K3 somewhat noisy
I found it interesting.
Dan- W4TQ
...
Is it really necessary to continue this thread? My inbox is seeing entirely
too much drivel like this thread and others on this reflector.
Bob W6TR
- Original Message -
From: Joe Subich, W4TV li
Hi
How must be K2's variable-bandwidth crystal filter in/out impedance (W2,W3
points) with
FL1 1.5 CW choosen?
Thanks in advance
Sergey
4Z5TV
--
View this message in context:
http://n2.nabble.com/K2-Crystal-filter-impedance-tp4141621p4141621.html
Sent from the Elecraft mailing list archive at
Do I need to see S meter reading changes when choosing between ATT and
PRE ?
Thanks
Sergey 4Z5TV
--
View this message in context:
http://n2.nabble.com/K2-S-meter-readings-tp4133464p4133464.html
Sent from the Elecraft mailing list archive at Nabble.com.
I am also looking at the Droid. I am planning on buying 4 of them for
Christmas
For the family. What do you think of it so far?
Thanks
Dan N0DT
Top posting is the official standard for this list, and its especially
important for those of us who also read our email on PDA phones. (I'm
using
the K3 at the same time via it's serial port. Is
this correct?
My second question concerns the W2. How is the computer connection made to
the W2? Is it not made directly to the W2? What cable goes where?
Thanks,
Dan - W4TQ
, both addressing the
K3. If I understand you correctly, I could make use of the emulator program
to run both programs at the same time.
Thanks,
Dan - W4TQ
.
Hi Dan,
I am using this emulator program:
http://eterlogic.com/Products.VSPE.html
I use it to run two
What is the K3 RFI mod?
Thanks,
Dan - W4TQ
I am getting destroyed by RFI on the back panel. I am using a MicroHam
MKII interface. I have ferrites on every cable from the MKII and it is
still shutting down the K3. I know the real solution
was a 40 meter
dipole which ran from one end of the attic to the other (just above my
head), and then out through a hole to a tree in the front yard.
Dan - W4TQ
K3 - 3020
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
Does anyone have an XG-2 they want to part with?
Thanks
Dan N0DT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
Gee, Jim, I wrote you a private email to your personal email account
and you publish it on this reflector? Who gave you permission to do
that? You really do have issues.
I apologize to the entire reflector for Jim's antics.
73,
Dan -- N3ND
On 10/7/09, JIM DAVIS nn...@astound.net
I am looking at speakers for my K3. I have looked
At the various computer speakers but don't know
Which of the many available would work best. Does
Anyone have an opinion on which set is best :-).
Also should I get a set with a sub?
Thanks
Dan N0DT K3 #3388
filter for 10 meter FM because I haven't heard
any detectable signals at my location.
Thanks,
Dan - W4TQ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
.
As far as Elecraft customer support is concerned,
Anyone that has had to use it knows it has no
Equal in the ham radio world.
OK where's the koolaid?
Dan N0DT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
This same thing happened to me this morning. I had headphones on and it
really caught me by surprise. I passed it off as something I probably
did, but apparently it is an issue. I may have been at the same NR
selection, too. Very odd.
Dan -- N3ND
will be happy with it on am?
Is there much advantage to getting the 2.8 8 pole
Verses the 2.7 5 pole? Same with the 400hz 8 pole
Vs the 500hz 5 pole.
Thanks for your help
Dan N0DT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
the design concept.
Some of us think that a different design concept could be mass produced with
more precision so that all of the knobs work properly on all of the K3's.
I'm sure there are several who will be glad to hear that this is my last
comment on knobs--honest.
73,
Dan - W4TQ
ps:
The superb
will be:
Were software defined radios developed because we lost the ability to make
knobs, or did we loose the ability to make knobs because of software defined
radios? We wouldn't want the K3 to be known as the missing link, would we?
Respectfully submitted,
Dan - W4TQ (ham for 50 years
I still for the life of me can't understand why the K3 didn't
Come with a USB port instead of the outdated com port. That is
One reason I have not bought one yet. Maybe in a future mod
They will address this.
Dan N0DT
-Original Message-
From: elecraft-boun...@mailman.qth.net
! You are
right! Milliwatts will cross oceans when the conditions are good!
Dan Allen
KB4ZVM
K2 S/N 1757
- Original Message -
From: Ron D'Eau Claire r...@cobi.biz
To: 'Elecraft Reflector' elecraft@mailman.qth.net
Sent: Sunday, June 07, 2009 3:48 PM
Subject: Re: [Elecraft] OT: dummy
Vista as a
supported operating system.
Has anyone found a way to use K3 EZ with Vista?
Thanks,
Dan (s/n 3020)
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
surprise you!
Dan Allen
KB4ZVM (Advanced Operator Privileges - 13 WPM code)
K2 S/N 1757
BS Chemistry 1969
BS Pharmacy 1974
Private Pilot Glider
Commercial Pilot/Instrument Rating Airplane Single-Engine Land
Airline Transport Pilot Airplane Multi-Engine Land
Certified Flight Instructor
close pads that are easily bridged. Holding the board up to a strong
light helps but a picture is worth a thousand words or light sightings.
Thanks in advance.
Dan
af4lb
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
safelyDan, W4EA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
recommend to use safelyDan, W4EA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please
I do hope that Elecraft has high on its list of future of K3 upgrades -
multiple tuner memory settings per band and even auto-tune.
Dan -- N3ND
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
and a 200 Hz filter.
73,
Dan -- N3ND
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help
)?
Dan - N3ND
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
My experience is that it does packet really well. I haven't tried it on the
other modes.
Dan Allen
KB4ZVM
K2 S/N 1757
- Original Message -
From: Bob Nielsen n...@clearwire.net
To: elecraft List elecraft@mailman.qth.net
Sent: Sunday, January 04, 2009 9:58 PM
Subject: Re: [Elecraft
Out of curiosity, is the dual PB done in IF or audio?
Dan - N3NDHappy Holidays
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
the receiver sensitivity, reducing the receiver noise
contribution will be of no benefit.
- Dan Tayloe, N7VE
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc
, or when a very poor antenna is being
used.
- Dan, N7VE
-Original Message-
From: Kok Chen [mailto:[EMAIL PROTECTED]
Sent: Monday, November 17, 2008 12:55 PM
To: Elecraft Reflector
Cc: Tayloe Dan-P26412
Subject: Re: [Elecraft] Re: K3: listening to both rcvrs - Reduced
receiver noise floor
have clicks
generated by the RX itself.
Both of these observations attest to the effectiveness, quality, and
attention to detail realized by Elecraft. Way to go!
Dan -- N3ND
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
not to be able to measure a
positive voltage on the high pins of the ACC connector with nothing other
than the meter attached? I realize that these are open collector, but I
would have expected to read some positive voltage.
***dan, K6IF
of the receivers
surviving such behavior?
***dan, K6IF
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
figure out what I am doing
wrong.
Hints?
***dan, K6IF
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net
that the speaker with the amp board in it ran off a 9V battery.
Now, I have a great little amplified speaker to use with not just the
KX1, for which I paid two bucks.
73!
Dan KB6NU
--
CW Geek and MI Affiliated Club Coordinator
Read my ham
I just sent out thousands of e-mails to the ARRL members in the Great
Lakes Division (I'm running for Vice Director). The forwarding
service is definitely working. :)
73, Dan KB6NU
On Sep 30, 2008, at 4:08 PM, Monty Shultes wrote:
I do not think they ever hosted email accounts
Looking for a built or unbuilt KFL1-2 (2 Band Module) OR KFL1-4 (4 Band Module)
for the K1 - and any other unbuilt add on K1 kits you may have!! Please email
me at [EMAIL PROTECTED] or call me on my cell at 770-377-6000 with asking price.
Thanks
Dan-KI4YZE
-Original Message-
From
K3, s/n 1567, is up and running. From order to receipt, exactly 4
months. Ten hour build, short shipped two screws which could have been
a completion breaker had I not had some in the shack (2-56, 1/4 inch).
What a hoot this little wonder is!
73,
Dan -- N3ND
Wonder if anyone has an unbuilt KX1 or any of it's accessory kits
unbuilt they would like to sell? Please call Dan at 770-377-6000 or
email me at [EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber
301 - 400 of 793 matches
Mail list logo