I find running the fans helps some for extended operation.
Hank
K4HYJ
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Oliver Dröse
Sent: Friday, July 5, 2019 6:37 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Follow up on "Digital modes on 144MHz only"
I was not happy with the 9700 - it had calibration issues. I returned it.
I have the internal K144XV with the reflock board and 1PPM TXCO installed in
the K3S - the external reference clock for the K3S would be better. So far
it has worked on the few digital modes I have tried. I use an
If I use a large power supply and turn the KX3 on its side and shake it - I
still only get 15 watts according to my Tird meter (Trusty ole Bird).
Hank
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Wayne Burdick
Sent: Saturday, June 29, 2019 4:15 PM
To: JP
Paul...
This is not exactly what you are describing, but it fails open.
https://hifimediy.com/usb-isolator
I've used one at a digipeater site and it took a static hit think - nearby
strike - it protected the TNC and PC. It was open on every line.
I have used them for ground loops with sound
A K3 kit from Elecraft?
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of KD7PY
Sent: Wednesday, June 19, 2019 4:12 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] new dead K3s still not fixed
bought a new K3s Factory and a k3 kit, 1 month ago, the K3S was dead
Had almost the same thing happen after the update.
Make sure that WSJT-X is using the correct Audio codec.
The slider in WSJT-X for output will override windows sound settings.
Thanks,
Hank
K3S, PS, KX3
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Gary Smith
Thank you sir for the update!!
Hank
K4HYJ
K3S, P3, KX3
From: Peter J. McClosky
Sent: Wednesday, June 12, 2019 5:44 PM
To: Hank
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] 40 meter AX1
When I spoke to them late last month, they said they were shooting for mid
September.
K4?
What’s that?
From: KENT TRIMBLE
Sent: Wednesday, June 12, 2019 5:07 PM
To: Hank ; elecraft@mailman.qth.net
Subject: Re: [Elecraft] 40 meter AX1
Hank . . .
I'm sure a minor little project called "K4" intervened.
73,
Kent K9ZTV
On 6/12/2019 2:03 PM, Hank wrote:
Anyone
Speaking of the foreseeable future
How long will the K3S be in production? I'm a new owner as of last fall and
hope pieces/parts and upgrades will continue for some time.
Hank
K4HYJ
K3s, P3, KX3
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Wayne Burdick
Got it!
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Leroy Buller
Sent: Friday, May 31, 2019 10:19 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Test. This getting to the list?
I've been sending questions in about the K4 but no replies.
I am getting a
Good advice!!
I'll redo the procedure after the radio has been in use for an hour. I don't
usually have the LCD illuminated because of the lighting at my desk - does the
display contribute that much heat?
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Mike
I have just installed the 1 PPM TXCO in my K3S. I bought the K3S last
October as a kit and have installed many options since then.
One thing I'm concerned with is the reference calibration. Without a good
frequency counter, I'm using WWV on 15Mhz and using beat cancelation. My
ears are pretty
Hey Folks.
In real world "seat-of-the-pants" experience, what difference if any would I
see upgrading to the KTCX03-1? I eventually would add the reference kit to
the internal 2 meter transverter.
One thought was improvement for FT8 (and eventually FT4) on HF and MFSK on 2
meters. I have
Make a video!
Hank
K4HYJ
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Wayne Burdick
Sent: Thursday, May 16, 2019 4:56 PM
To: lmarion
Cc: Elecraft Reflector
Subject: Re: [Elecraft] K4
> On May 16, 2019, at 3:53 PM, lmarion wrote:
>
> Will you be able to
I wonder when the K3S and P3 will be discontinued?
Hank
K4HYJ
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of W0FK
Sent: Thursday, May 16, 2019 7:22 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K4 Press Release
Reported on QRZNOW
Reinstalling the KX3 utility software from the Elecraft site did nothing.
How can I check the registry values on the PC to know if that is the cause?
Hank
K4HYJ
-Original Message-
From: Dick Dievendorff
Sent: Sunday, April 14, 2019 12:47 AM
To: donw...@embarqmail.com
Cc: HB ; Elecraft
Somebody pls close this thread!
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of W2xj
Sent: Sunday, April 7, 2019 2:22 PM
To: Alan Bloom
Cc: Elecraft Reflector
Subject: Re: [Elecraft] BIZARRE OFFERING FROM MFJ
Mighty fine junk
Sent from my iPhone
> On Apr 7,
Hey gang.
Just double checking my setup. I'm using a PK-232sc+ for sound card modes,
FSK RTTY, CW, and PACTOR with my K3s. I recently added the K144XV and since
everything is already hooked up, I tried sending packet. After tweaking the
AFSK control on the PK for proper deviation and proper
I'm a new K3s owner as of October, but I'll take a stab! I leave phones
plugged in to the back of the rig all of the time and an external speaker
all of the time. My settings are SPKRS = 2 and SPKR+PH =yes.
Hope that helps!
Hank
K4HYJ
-Original Message-
From:
?
Hank
K4HYJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
I monitored this group before I bought my K3s back in October. I have learned
how to make cables for various things, who makes good homebrew gear (and some
guys that sell their own stuff for K3's and KX's), and even bought some used
Elecraft gear hear.
I'm not sure how to call out the wrong
Filter caps bad? AC on the DC supply side maybe? A well made linear supply
does not make noise that has to be filtered otherwise. All switching
supplies must be cleaned up because their design generates noise.
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of K9MA
I bought a Rackmount 35amp Astron when I started working at my office (the
office bought it). We turned it on in 1993 and it is still on today. I have a
50 amp at home that besides the crappy meter lights (they now are illuminated
by LEDs!), runs like a champ.
Funny though, when I find a
:-D
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Wayne Burdick
Sent: Thursday, January 10, 2019 10:01 PM
To: Jamie WW3S
Cc: Elecraft Reflector
Subject: Re: [Elecraft] whats a updated K3 called?
...and the AF amp improvements on the DSP board, and the new VFO
24 matches
Mail list logo