Recently finished the install of the KRX3 receiver and two KSYN3A
synthesizers in my K3. I have had the 2nd receiver sitting in its box too
long, but family problems was the priority the last year or so. When the new
KSYN3a came out, it looked like a good option to install also.
My K3 was a
Thought I'd share my KRX3 install adventure.
Couple of missing parts came in Saturday evening,
(2) 1/4 inch spacers with internal 4-40 threading,
been another long hot day, is there any other kind here in West Texas?
so I decided to wait for Sunday when I was fresh.
Nice breakfast, a cool down
is the smallest radio with such an ability at this
moment.
TNX 73,
Johnny VR2XMC
從︰ Sam Morgan k5oai@gmail.com
收件人︰ elecraft@mailman.qth.net elecraft@mailman.qth.net
傳送日期︰ 2011年07月25日 (週一) 11:58 AM
主題︰ [Elecraft] K3 KRX3 install successful
Thought I'd share my KRX3 install adventure
After the first reading of the installation instructions, I
procrastinated for some time before attempting the installation of
the Sub RX and a couple of other options (K3EXREF KAT3).
It seemed as if one would have take the K3 almost all apart to
undertake this installation. However I'd
I've just finished installing a KRX3 with the KBPF3 and when I push
the sub button it tells me NO SUB. I have been through the menus several
times, setting up the filters and modes and bandwidths for the main and the
sub receiver but I still get the same error when I try to select the sub
The most obvious question: Did you set CONFIG:KRX3 to Ant=bnc or
Ant=Atu? (as opposed to not inSt)
73
--
Joe KB8AP
On Jan 10, 2010, at 5:58 PM, sr...@swbell.net wrote:
I've just finished installing a KRX3 with the KBPF3 and when I push
the sub button it tells me NO SUB. I have been
Did you power cycle the radio after enabling the additional features in
the menu?
And you can hit SUB while in the KBPF3 feature menu to turn on which RX
you've installed the filter into. Yes the radio does automatically
select it when travelling outside the ham bands.
~BTH (KC7OTG)
On Sun,
.
I have more reading to do.
Thank you all for your help,
Stan Rife
W5EWA
-Original Message-
From: Brett Howard [mailto:br...@livecomputers.com]
Sent: Sunday, January 10, 2010 11:13 PM
To: sr...@swbell.net
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] [K3] KRX3 install
I'm installing a KRX3 in K3 #2006 and have a small confusion. I'm on p.
20 of the KRX3 installation manual. I have confirmed that R91 has a
value of about 22 ohms (21.9 on my meter). The 4th step on the page
says that if that is the case, skip directly to the next page. Being
curious, I
I'm wondering what those who have installed the 2nd RX in their K3 think of the
procedure? I took a quick look at the manual and it seems like you have to take
half the radio apart for this. I'm not sure I want to do this to a rig that is
currently working FB. I'm not crazy about pulling the
I'm wondering what those who have installed the 2nd RX in
their K3 think of the procedure? I took a quick look at the
manual and it seems like you have to take half the radio
apart for this. I'm not sure I want to do this to a rig that
is currently working FB. I'm not crazy about pulling
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 KRX3 Install
I'm wondering what those who have installed the 2nd RX in their K3 think of
the procedure? I took a quick look at the manual and it seems like you have
to take half the radio apart for this. I'm not sure I want to do this to a
rig
12 matches
Mail list logo
