.
Have fun!
73,
Geoff
LX2AO
- Original Message -
From: Steve KC8QVO kc8...@yahoo.com
To: elecraft@mailman.qth.net
Sent: Monday, January 02, 2012 11:35 PM
Subject: Re: [Elecraft] IF tap?
Don Wilhelm-4 wrote
Steve,
This Elecraft email reflector stopped being the K2
Is there a good place to tap the IF stream for an output? I have a spectrum
analyzer and was thinking of running an IF-out to the analyzer, it doesn't
matter what frequency if its under a gig.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/IF-tap-tp7144523p7144523.html
Steve,
You did not say which transceiver you have, so we can't really answer
except to say that the K3 does have an IF output if you install the KXV3
option.
73,
Don W3FPR
On 1/2/2012 1:51 PM, Steve KC8QVO wrote:
Is there a good place to tap the IF stream for an output? I have a spectrum
Is there a good place to tap the IF stream for an output?
Are you asking this about a Wells-Gardner BC-348-R?
For some reason, it always seems to help if the applicable radio
is identified. :-)
Mike / KK5F
__
Elecraft mailing list
I figured the radio was implied since I posted in the K2 forum In any event,
its a K2 SN 6950. I'm just looking for a constant frequency I can use
post-VFO to run through my spectrum analyzer so I can see the band I'm on.
--
View this message in context:
Steve,
This Elecraft email reflector stopped being the K2 reflector as soon as
the K1 was available, and now there are questions about the K3, K2, K1,
KX1, now the KX3, KPA500, KRC2, mini-modules, and any other product that
Elecraft has produced or has announced for the future.
Clifton Labs
: Re: [Elecraft] IF tap?
Steve,
This Elecraft email reflector stopped being the K2 reflector as soon as
the K1 was available, and now there are questions about the K3, K2, K1,
KX1, now the KX3, KPA500, KRC2, mini-modules, and any other product that
Elecraft has produced or has announced
Don Wilhelm-4 wrote
Steve,
This Elecraft email reflector stopped being the K2 reflector as soon as
the K1 was available, and now there are questions about the K3, K2, K1,
KX1, now the KX3, KPA500, KRC2, mini-modules, and any other product that
Elecraft has produced or has announced
Steve,
One cannot usually use a spectrum analyzer in situ like you would an
oscilloscope - the spectrum analyzer has a 50 ohm input and will load
the circuit under test significantly. That is why you need the buffer
amplifier.
73,
Don W3FPR
On 1/2/2012 5:35 PM, Steve KC8QVO wrote:
Just
I just added the P3 and am thoroughly enjoying it.
And have a question about the Tap/QSY function.
It seems to have about the same mechanical feel as the tap/hold buttons
on the K3
but it does not seem to work 100% of the time. I have to tap repeatedly
sometimes to get it to move. Is this
...@mailman.qth.net [mailto:elecraft-
boun...@mailman.qth.net] On Behalf Of J. Crit Harley, MD, C.Ht
Sent: Monday, May 02, 2011 5:24 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] P3 Tap/QSY
I just added the P3 and am thoroughly enjoying it.
And have a question about the Tap/QSY function
Subject: [Elecraft] P3 Tap/QSY
I just added the P3 and am thoroughly enjoying it.
And have a question about the Tap/QSY function.
It seems to have about the same mechanical feel as the tap/hold buttons
on the K3
but it does not seem to work 100% of the time. I have to tap repeatedly
sometimes
I have not experienced the anomaly you describe.
73,
Tom
Amateur Radio Operator N5GE
On Mon, 02 May 2011 07:23:48 -0400, J. Crit Harley, MD, C.Ht
jchar...@bellsouth.net wrote:
I just added the P3 and am thoroughly enjoying it.
And have a question about the Tap/QSY function.
It seems to have
I have programmed FN4 and FN8 as Fred does.
I originally did it in an attempt to cut down on any possible long-term wear of
the Tap=QSY button but have gotten used to it and prefer using FN4/8.
Also, as mentioned, it eliminates the problem that some people have caused by
turning the knob
of the pass band, as
per CW, and PSK D mode.
Jim M0CKE
-Original Message-
From: Alan Bloom
Sent: Monday, February 07, 2011 6:46 PM
To: James Balls
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] p3 Tap to QSY in Data A mode
Hi Jim,
I'm not seeing the problem. With the K3 set up
mode.
Jim M0CKE
-Original Message-
From: Alan Bloom
Sent: Monday, February 07, 2011 6:46 PM
To: James Balls
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] p3 Tap to QSY in Data A mode
Hi Jim,
I'm not seeing the problem. With the K3 set up for PSK D data mode
Jim,
I don't have a P3, so cannot comment directly on that aspect, but there
seems to be some confusion between DATA A and AFSK A in your latest
e-mail, which may obscure your message.
The mode normally used for PSK and other sound card digital modes is
DATA A. DATA A is an upper sideband
Anyone ??
No replies on this ?
From: makid...@hotmail.co.uk
To: elecraft@mailman.qth.net
Date: Sat, 5 Feb 2011 11:57:34 +
Subject: [Elecraft] p3 Tap to QSY in Data A mode
All
Just setting up for PSK contest and notice that the tap to QSO is not
accurate, ie if I tap
...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of James Balls
Sent: Monday, February 07, 2011 5:28 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] p3 Tap to QSY in Data A mode
Anyone ??
No replies on this ?
From: makid...@hotmail.co.uk
To: elecraft@mailman.qth.net
.
I think this is a feature that’s required for the P3.
Anyone else agree?
Jim M0CKE
From: w...@w5ov.com
To: elecraft@mailman.qth.net
Date: Mon, 7 Feb 2011 06:37:41 -0600
Subject: Re: [Elecraft] p3 Tap to QSY in Data A mode
Why not use your mouse and select signals in the PSK software
To: elecraft@mailman.qth.net
Date: Sat, 5 Feb 2011 11:57:34 +
Subject: [Elecraft] p3 Tap to QSY in Data A mode
All
Just setting up for PSK contest and notice that the tap to QSO is not
accurate, ie if I tap to qsy to the scope peak for a PSK signal with the
filters narrow to say 0.2
of K3/P3 firmware are you running?
Thanks,
Alan N1AL
On Mon, 2011-02-07 at 11:28 +, James Balls wrote:
Anyone ??
No replies on this ?
From: makid...@hotmail.co.uk
To: elecraft@mailman.qth.net
Date: Sat, 5 Feb 2011 11:57:34 +
Subject: [Elecraft] p3 Tap to QSY in Data
All
Just setting up for PSK contest and notice that the tap to QSO is not accurate,
ie if I tap to qsy to the scope peak for a PSK signal with the filters narrow
to say 0.2 the signal it well outside the filter pass band
Is there any way of changing this so the signal arrives in the passband
Of Jim Balls
Sent: Saturday, February 05, 2011 4:58 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] p3 Tap to QSY in Data A mode
All
Just setting up for PSK contest and notice that the tap to
QSO is not accurate, ie if I tap to qsy to the scope peak for
a PSK signal with the filters
Just started happening today.
MCU 3.80.
I tap power (to shut it off, just as I've always done)
The LCD goes all-orange, no segments. The Rx goes off.
If I power cycle the power-supply the K3 comes back on in normal
operation.
Strange.
--
Jeff Wandling DE W7BRS K3 #2105
Hi Jeff,
Have you done the 12V Sense mod?
http://www.elecraft.com/K3/mods/KPA3_12V_Sense_Modification_Rev_A.pdf
73
--
Joe KB8AP
On Feb 15, 2009, at 4:46 PM, Jeff Wandling W7BRS wrote:
Just started happening today.
MCU 3.80.
I tap power (to shut it off, just as I've always done)
The
26 matches
Mail list logo
