[Elecraft] Interconnecting KPA500 to KTA500 and ANAN7000dle

2021-07-08 Thread Andy Durbin
"To add to what Jack said, several of us use Kenwood transceiver (TS-590 and TS-890) with KPA500-KAT500 combos. The Aux cable is useless. To get the KPA500 to follow the radio frequency, here is the circuit of the homemade 9-pin cables we are using:

Re: [Elecraft] Interconnecting KPA500 to KTA500 and ANAN7000dle

2021-07-05 Thread Wes
To add to what Jack said, several of us use Kenwood transceiver (TS-590 and TS-890) with KPA500-KAT500 combos.  The Aux cable is useless.  To get the KPA500 to follow the radio frequency, here is the circuit of the homemade 9-pin cables we are using:

Re: [Elecraft] Interconnecting KPA500 to KTA500 and ANAN7000dle

2021-07-05 Thread Tom Berry
On 7/5/2021 12:48 PM, Jack Brindle via Elecraft wrote: Do you really need the 15-pin AUXIO cable? The ANAN doesn’t speak Auxbus, so unless it outputs the BCD signals that the KPA500 (but not the KAT500) uses, then the AuxIO cable won’t do you any good. Remember, the KPA and KAT do not

Re: [Elecraft] Interconnecting KPA500 to KTA500 and ANAN7000dle

2021-07-05 Thread Jack Brindle via Elecraft
Do you really need the 15-pin AUXIO cable? The ANAN doesn’t speak Auxbus, so unless it outputs the BCD signals that the KPA500 (but not the KAT500) uses, then the AuxIO cable won’t do you any good. Remember, the KPA and KAT do not communicate. Instead you will need a pair of phono to phono

Re: [Elecraft] Interconnecting KPA500 to KTA500 and ANAN7000dle

2021-07-04 Thread Tom
If you are looking for true, all 15 wires run independently cables, look at the HD-15 male-female cables by Winford: https://www.winford.com/products/ext15hd.php Their breakout connectors are great for wiring up other projects. When I had one

Re: [Elecraft] Interconnecting KPA500 to KTA500 and ANAN7000dle

2021-07-04 Thread Jim Brown
Hi Dick, Before you try to buy on the internet, note that generic VGA cables will NOT work, because for use with Elecraft, all the pins are used, while on VGA cables, a lot of the pins are bused together as a common return. 73, Jim K9YC On 7/4/2021 4:37 PM, Dick Bingham wrote: Greetings to

[Elecraft] Interconnecting KPA500 to KTA500 and ANAN7000dle

2021-07-04 Thread Dick Bingham
Greetings to everyone I am just getting started interconnecting my Apache-Labs ANAN-7000dle to a KPA500, KTA500 and my DELL E6510 laptop for a base-station I can operate remotely from another QTH. Before I order several from Elecraft, does anyone have E850463 Aux Interface cables that are