Okay, MY memory is failing me. Just reread the manual and quick memories it
is for 0-9 and VFO-A for the rest...must have been a different radio. Is 42
to early for senility?
Thanks all!
Jim
Jim - W6VAR wrote:
>
> I've updated to 2.67 and I have Mem 0-9 set to nor, but i cannot access
> me
Jim
My memory 0-9 is set to nor. I don't think you can select other than 0-9 via
the keypad whichever config setting you are in.
73
Barry VK2BJ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Jim,
With MEM 0-9 set either to BAND SEL or NOR, the 0-9 buttons are *still*
quick memories. You cannot enter two digits from the keypad - you must
use the VFO A knob to select memories with numerical value addresses
greater than 9.
73,
Don W3FPR
Jim - W6VAR wrote:
Thanks, Barry. This sho
Thanks, Barry. This should be true if CONFIG: MEM 0-9 is set to BAND SEL, but
I have it set to NOR. In which case, 0-9 should NOT be in the band select
mode and ALL memories should be accessable with M>V ## M>V...unless of
course I missed something in the updates :)
Jim
Barry Simpson wrote:
>
Hi Jim
Memories 0-9 are quick memories which are accessed by the commands M-V and
then the keypad number. I have programmed each of those memories with each
band 160 thru 6 metres so that I can change bands without having to use the
up/ down button. I have also programmed the M1 thru M4 buttons to
I've updated to 2.67 and I have Mem 0-9 set to nor, but i cannot access
memory channels directly beyond 0-9. If I want memory channel 15, I press
V>M, then as soon as I press the 1, I'm taken to memory 1. If I want 61, I
get a "NOT SET" error becasue I don't have a memory 6.
I seem to recall this
6 matches
Mail list logo