Might check your crystal filter alignment. The K3 utility also shows a
matrix of when a filters is enabled for each mode.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-SSB-audio-got-lost-tp7580095p7580180.html
Sent from the Elecraft mailing list archive at Nabble.com
Yes, I would check the crystal configuration. When I originally built
mine, I left the FL1 slot open for future AM or FM filter and put my
2.8KHz filter in FL2. At some point I also noticed I had no audio and
this is because the width knob was turned wider than 2.8 so the K3 was
trying to use
Tom,
The reflector strips off any attachments (it also does not accept HTML).
If you can put the information you are trying to attach onto a website,
give us a link to it, otherwise we will not see it.
The other possibility is to put the information in plain text and then
you can post it as p
Now I am in real trouble!!
This morning when I turned on my K3, in hopes of being able to perform some
positive troubleshooting on my lost USB and LSB rcvr audio, I went to the
20m SSB band and lo and behold my USB rcvr audio is NOW WORKING!!
I have done nothing to my K3 except for having gone ov
I am having a configuration issue that I have spent hours trying to figure
out and need some help please.
As a CW person, I seldom operate SSB but I am trying to get set up for this
weekend's CQWW SSB contest. I have tried posting two configuration pages
from K3-EZ but with the file size limitatio
I think I found it - try looking in your K3 Utility, under the Crystal Filter
Configuration - there you will find the enable / disable for USB and LSB for
each of the filters you have installed.
Hope that cures your problem!
Jim / W6JHB
On Wednesday, Oct 23, 2013, at Wednesday, 7:39 AM, To
I am having a configuration issue that I have spent hours trying to figure
out and need some help please.
As a CW person, I seldom operate SSB and I am trying to get set up for this
weekend's CQWW SSB test. Below are some of my configuration for my K3 and
the attached are jpg configuration sheets
After working 6 meters in the ARRL VHF QSO Party this weekend, a friend of mine
in Louisiana emailed me a receive audio capture, just a couple of minutes, of
me running a pileup (something I was able to do for hours at a time, due to
fantastic sporadic-E conditions). I guess there's no good reas
Lee,
Have you installed the Front Panel Microphone Circuit Modification in
your K3?
http://www.elecraft.com/K3/mods/K3_Application_Note_Front_Panel_Microphone_Grounding.pdf
I would do that as a first step.
If that does not cure your problem, then I would suggest work with the
antenna system to
Here is the scenario
NAQP Contest - SSB
100 watts
Heil Headset with HC-4
Using VOX
Connected to the front (not the back)
Only 160 meters
Antenna - Inverted-L with feed point less than 10 feet from the K3
Radials - 20 random length radials in the yard. City lot
Tuned using a Palstar AT2K
SWR
Having a great time with my K3 (#228) which I mainly use for CW. However on SSB
(2.7 filter) I find it tends to ring - even more so with DSP (speaker and
headphones). Gary sent me a very fast and helpful e-mail and I have found that
trial and error adjustment of FL FRQ makes an improvement - but
Hi All,
I have had something rather strange occur a couple of times.
While I don't get on SSB very much, I have been chatting
with my friend Jay, W5JAY, on 40 meter SSB on occasion.
Typically he has indicated that my audio sounds excellent.
However, a couple of times he noted that my modulati
12 matches
Mail list logo
