Re: [Elecraft] K3/P3/Microkeyer hookup

I do not own a Microkeyer but I do have several DigiKeyer II's that I use for FSK and CW. My MicroHam cables are clearly marked where to plug them into a K3/K3S. I move my transceivers around a number of times a year, the markings have made setup quite easy. If you do not have MicroHam

Re: [Elecraft] K3/P3/Microkeyer DB9 connections

On 2020-01-22 6:25 AM, Randy Lake wrote: > I will add that I only need the DB9 hookup. Microham RS232 to P3 (PC)? > Then P3 (TXVR) to K3 RS232 ? Yes. 73, ... Joe, W4TV On 2020-01-22 6:25 AM, Randy Lake wrote: I will add that I only need the DB9 hookup. Microham RS232 to P3 (PC)? Then P3

[Elecraft] K3/P3/Microkeyer DB9 connections

I will add that I only need the DB9 hookup. Microham RS232 to P3 (PC)? Then P3 (TXVR) to K3 RS232 ? I have looked at app notes and past listings and cannot for the life of me get my stuff hooked back up correctly. A bit of guidance would be appreciated. Thank you -- Randy Lake N1KWF 73 Gunn

[Elecraft] K3/P3/Microkeyer hookup

I have looked at app notes and past listings and cannot for the life of me get my stuff hooked back up correctly. A bit of guidance would be appreciated. Thank you -- Randy Lake N1KWF 73 Gunn Rd. Keene,NH __ Elecraft mailing list Home:

Re: [Elecraft] K3+P3+Microkeyer II

OM-Power includes TCP/IP support built into the 2000A+ and via an optional control head with the other autotune amps. They use Lantronix XPort. 73, Josh W6XU On 6/19/2017 6:07 AM, Mike va3mw wrote: Another reason to start moving to a LAN based solution as it is so much simpler to share

Re: [Elecraft] K3+P3+Microkeyer II

Another reason to start moving to a LAN based solution as it is so much simpler to share frequency data. If vendors supported it at the box level cabling nightmares start to go away. I'm now running raw socket connections where I can to rs232/ip converters. Mike va3mw > On Jun 18, 2017,

Re: [Elecraft] K3+P3+Microkeyer II

Again, that makes no sense. OM Power supports ELECRAFT directly and provide a pair of serial ports for doing so. No Y cable is necessary (and a bad idea). This is how OM Power describes using their product. It works fine. You're coming up with a workaround for a nonexistent problem. 73,

Re: [Elecraft] K3+P3+Microkeyer II

On Sun,6/18/2017 5:20 PM, Joe Subich, W4TV wrote: Using the Icom controls is far more reliable than using a "Y" connection on a RS-232 connection; it avoids issues with loading RS-232 circuits and the isolated CI-V Transceive emulation provided by the microHAM interface avoids issues with

Re: [Elecraft] K3+P3+Microkeyer II

microHAM has provided "cross brand" support for mixing transceivers and amplifiers for a dozen years or more starting with the original microHAM Band Decoder. Icom has been the default interface for serial (CAT) controls while Yaesu (BCD) has been the default interface for "Band Data" control.

Re: [Elecraft] K3+P3+Microkeyer II

I have no idea where you're getting this idea to interface as if it's a PW-1?? OM Power has supported Elecraft for many years. Why not review the OM Power manual's recommendation before making up an answer? 73 Josh W6XU Sent from my mobile device > On Jun 18, 2017, at 6:37 AM, Joe Subich,

Re: [Elecraft] K3+P3+Microkeyer II

Patch the OM Power between P3 and microham box. TCVR goes to P3 and PC goes to microham. Then select Elecraft and baud rate from the menu. You should immediately see it following frequency on the display. OM Power echoes serial commands through and monitors the data. I don't have your model,

Re: [Elecraft] K3+P3+Microkeyer II

Don is off base when he talks about a system using a microHAM product. Configure your station as shown in the application note "Using the Icom PW-1" at http://www.microHAM-USA.com/support.html The connection diagram for microKEYER II is

Re: [Elecraft] K3+P3+Microkeyer II

Natale, Put the "Y" cable at the PC connector on the P3. As far as how to set your amplifier, I leave that to others familiar with that amp to answer. 73, Don W3FPR On 6/18/2017 5:45 AM, Natale Borghetti wrote: I have installed K3+P3+Microkeyer II and as result I have all the com ports

[Elecraft] K3+P3+Microkeyer II

I have installed K3+P3+Microkeyer II and as result I have all the com ports busy.now I am setting up the OM-POwer 2000A+ amplifier and in order to have the automatic tuning I have to supply the RTX frequency..how can I do it ??? Some say to me...using the CI-V Icom interface of the

Re: [Elecraft] K3 + P3 + Microkeyer

Can I use the key line interrupter (KPAK3AUX) between the K3 and the ultrabeam controller? I´m looking for a way to protect the beam( keying while elements are moving) without buying a microham device(rather expensive), or is there another way I could go? 73,Chris-OE5CSP -- View this message in

Re: [Elecraft] K3 + P3 + Microkeyer

If the Ultrabeam controller provides a PTT interrupt circuit you can use the KPAK3AUX Key Line Interrupter to disconnect the Key line in the KPAAUX cable and route Key Out from the K3 through the Ultrabeam controller to the PA Key jack on the KPA-500. 73, ... Joe, W4TV On 6/16/2012 4:31

Re: [Elecraft] K3 + P3 + Microkeyer

Hi Chris, To add to Joe's answer, if the Ultrabeam controller does not an interrupt circuit built into it you could use the N8LP Tuning Relay. http://www.telepostinc.com/STR.html 73, Mike K2MK Joe Subich, W4TV-4 wrote If the Ultrabeam controller provides a PTT interrupt circuit you can use

Re: [Elecraft] K3 + P3 + Microkeyer

What if I already have the AUX split for the KRC2? -Robby VY2SS -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-P3-Microkeyer-tp7557158p7557672.html Sent from the Elecraft mailing list archive at Nabble.com. __

Re: [Elecraft] K3 + P3 + Microkeyer

You can add as many Y-adapters as needed to the K3 AUX connector. In some of my setups, I have as many as four, due to the number of devices connected to the AUX signals. Just be sure you get Y-adapters that have all 15 pins wired through and none shorted to each other. Ed W0YK Robby,

[Elecraft] K3 + P3 + Microkeyer

Hi Guys If we add the K500 to the line up above of K3+P3+MK11, how does the K500 fit in please and will I need any additional cables beyond the KPAK3AUX that I have ordered with the Amplifier? Similarly how does the SteppIR controller then fit in? 73 de Ray G3XLG

Re: [Elecraft] K3 + P3 + Microkeyer

The KPA-500 does not figure in the K3+P3+MKII chain ... As long as you have the DB15HD Y cable (part of the KPAK3AUX cable set), you can connect the KPA-500/K3 AUX cable to one leg and the MK II ACC plug to the other and there will be no issue. If you use the MK II PA PTT output for amplifier

Re: [Elecraft] K3 + P3 + Microkeyer

If I remember correctly, microHAM specifically advises *against* connecting like that and doing updates through the microHAM device. It would seem prudent to disconnect your microHAM device and directly connect your P3/K3 combination and effect updates in that manner. Art - N4PJ On Mon, Jun 4,

Re: [Elecraft] K3 + P3 + Microkeyer

_ From: Arthur Burke [mailto:aburk...@gmail.com] Sent: Monday, June 04, 2012 12:24 PM To: Bob - W6OPO Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 + P3 + Microkeyer If I remember correctly, microHAM specifically advises *against* connecting like that and doing updates through

Re: [Elecraft] K3 + P3 + Microkeyer

An RS-232 A/B switch can make that changeover easy - the common of the A/B switch connects to the K3 (or P3) and one side connects to the nicroHam while the other side connects directly to a serial port (or USB to serial adapter). A simple flip of the switch changes it from normal

Re: [Elecraft] K3 + P3 + Microkeyer

I do it that way myself ... each K3 (+P3) has an RS-232 A/B switch on it. The computer serial port has an A/B/C/D switch that connects to each of the A/B switches, the programming cable for the XG3 and for now the LP-100 (but normally my general purpose test port). 73, ... Joe, W4TV On

Re: [Elecraft] K3 + P3 + Microkeyer

Plug the USB cable that is connected to the MicroHam Keyer into the PC. Be sure you have installed and run Router defining the necessary port numbers for all the features in the microKeyer you intend to use. The big cable that you plugged into the back of the microKeyer with all the seperate

Re: [Elecraft] K3 + MicroHam MicroKeyer + Heil Proset

Hi Tom I'm not sure if you sorted your problem or not but i thought I'd reply as I have similar setup - K3+P3 +MicroHAM MicrokeyerII+ Heil Proset K2 First I would connect the Proset phones mic with the PTT Mic lead (connected to a footswitch or other switch) to the FRONT of the K3, ignoring the

Re: [Elecraft] K3 + MicroHam MicroKeyer + Heil Proset

Thanks. I got it working and am using the same set up as you. My problem was the phone jack on my push to talk button was not working if I pushed it too far into the heaset adapter supplied by Heil. Tom On Sat, Mar 3, 2012 at 2:20 PM, Ray G3XLG ray...@btinternet.com wrote: Hi Tom I'm not

[Elecraft] K3 + MicroHam MicroKeyer + Heil Proset

I have this set up and am using the MicroKeyer cable set that has the mic input on the back of the rig. I have the Proset plugged into the RJ45 adapter that plugs into the back of the MicroKeyer and provides the 8 pin mic connector. I have the correct Heil to K3 adapter cable. I have a push to

Re: [Elecraft] K3 + MicroHam MicroKeyer + Heil Proset

Tom, You have too many devices involved to say whether this is a problem with your setup and cables or whether it is a K3 problem. Do you have anything connected between the Microkeyer and the K3 PTT input? If you are going to get PTT to the K3, you must have something connected to the PTT

[Elecraft] K3 and MicroKeyer MKII

I'm trying to connect my K3 to the MicroHam MKII. I'm struggling already for two weeks now to let the MKII to stop putting my K3 into TX mode (unwillingly). When I switch on the K3 and the MKII (both on a different power supply) nothing goes wrong so far. But as soon as the router is started,

Re: [Elecraft] K3 and MicroKeyer MKII

Dr Evert, First off all for MK2 Use separate virtual comports in the router for every Item you want to control. So no virtual comport sharing. Eg cat virtual comport = ptt virtual comport must be avoided. That can cause strange behaviour in combination with different programs. For the

[Elecraft] K3 and microkeyer

Just finished my K3 works great Interfaced with the microkeyer which reads the frequency and keys cw fine. Now I need to configure N1MM to put it all together. Created ports as follows in Router 2=Radio 3=Ptt 6=foot switch 8=winkey. Can someone help me get N1MM configurer to put all this

[Elecraft] K3 with microkeyer for RTTY

Anyone using this combination? What settings for the K3 and microkeyer did you use? I get the K3 keyed but only a steady, or no tone when transmitting. Feel free to reply direct ([EMAIL PROTECTED]) or via the reflector. Thanks Ron N4XD ___ Elecraft