Ethanol and Isopropyl Alcohol are almost as polar as water. That's why
they mix so well with water.
https://en.wikipedia.org/wiki/Solvent
According to its Wikipedia entry, ethanol doesn't even mix well with
heavy oils. Isopropanol is better.
--
David Woolley
Owner K2 06123
On 09/09/15
>Don:
>Acetone should NEVER be used in electronic assembles. Acetone
>causes both long and short term effects on various components
>including the PCB. It effects epoxy, lacquers, paints, and plastics,
>particularly polystyrenes
[...]
>73, Fred, AE6QL
Chemicals intended for use around
PCBs (FR-4) are glass reinforced epoxy, not polyester (I think the old,
brown ones (SRBP) are paper reinforced urea-formaldehyde). Also the
resin component is cross-linked, whereas the article is talking about
thinning the uncured (un-crosslinked) resin. (Glass reinforced polyester
is used in
and
evaporates more cleanly.
Jer
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ian
White
Sent: Tuesday, September 08, 2015 4:09 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KSYN3A mod problem
>Don:
>Acetone should NEVER b
> Food grade EverClear is 100% alcohol...
Not quite. Pure ethanol is a *practical* impossibility.
https://en.m.wikipedia.org/wiki/Everclear_(alcohol)
It comes in 75.5 percent (151 proof) and 95 percent ethanol (190 proof)
varieties. Sale of the 95 percent is banned in some states.
The 91
One other thing to consider that can make a difference in some cases. There
are three types of alcohol commonly available. Methanol often used as shellac
thinner, ethanol, booze if you wish, which EverClear is, and isopropyl which is
often found in rubbing alcohol sold in drugstores. They
You can get denatured alcohol from the hardware store, but I think that
can contain methanol which I wouldn't suggest using because of toxicity
and because it melts more things than ethanol. Methanol will go through
your skin so you need ventilation and the correct gloves.
Rubbing alcohol from
for cleaning and
evaporates more cleanly.
Jer
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ian
White
Sent: Tuesday, September 08, 2015 4:09 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KSYN3A mod problem
>Don:
>Acetone should NEVER b
Food grade EverClear is 100% alcohol but government classified in the U.S. as a
taxable beverage. Buy it at a liquor store.
--
Marc W8SDG
> On Sep 8, 2015, at 9:14 AM,
> wrote:
>
> When you purchase alcohol to use as cleanup it's best to
6QL
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don
Wilhelm
Sent: Monday, September 7, 2015 2:43 PM
To: Nick Lelyak
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KSYN3A mod problem
Nick,
Yes, but it fails when it cools again - someth
Disband the terrorist EPA (A terrific idea regardless) and we could go back to
Freon vapor degreasers.
On 9/7/2015 5:05 PM, Don Wilhelm wrote:
Fred,
Gary and I both have been using acetone for a long time.
If the board is flooded, the results can be catastrophic since residue flows
under
ong as it pure, be used for
de-fluxing PC boards.
73, Fred, AE6QL
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don
Wilhelm
Sent: Monday, September 7, 2015 2:43 PM
To: Nick Lelyak
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KSYN3A mod prob
Nick,
Yes, but it fails when it cools again - something is not making good
contact, and it may be residue from the cleaner. I can't be certain of
that, but I would get that cleaner residue off and try again.
I would suggest that you remove the cleaner residue from the contacts
with acetone
yes Don,
problem comes on again after radio cools down.
Pins were properly cleaned from residue, but they
are not gold plated and I black spots on some of them had left after
cleaning with contact cleaner. So I decided buy recommended cleaner first
Thanks
Nick
On Mon, Sep 7, 2015 at 5:43 PM,
Thanks Don, Guy
appreciate yours quick response.
I found out that problem disappears when front panel warms up to 37 C
and more.
Looks like problem somewhere in FP. To clean main connector I used
Electronic Contact Cleaner. It may works not so good as Deoxit which
is not widely available in
Nick,
I don't think it is related to the synthesizer, but go through the other
things you did (cleaning the Front Panel connector and some other
boards) - you should unplug those, and depending on how you "cleaned"
the connectors, wipe them carefully and reassemble.
Work on each connector
Hi,
have replaced old synthesizer in my K3 for new KSYN3A and have problem with
this modification.
Changing frequency by VFO A or VFO B several kHz up or down switches mode
to reverse
(CW to CWR, USB to LSB), frequency on display jumps 1 mHz lower ( ex.
14015.00 > 13015.00,
1830.00 > 0830.00 etc.)
17 matches
Mail list logo