Thanks to all for the interesting ideas. I am now using the KX3 I/Q output to
my PC line in (works equally well to mic input in rear) and the simple NaP3
software. Works great for panadapter and controlling the rig. I have ordered
the inexpensive iMic soundcard to see if there will be any
: [Elecraft] KX3 and P3 Adapter
That is exactly how it works for me... Works with iPad or iPhone. I am
using the lighting version of the camera adapter with my iPad Mini even.
Jeff, K7GDE
On Wednesday, May 22, 2013, Chris Tate - N6WM wrote:
Forgive me if this was previously shared.. Just
Must be some interest in the topic!! I have a line connected from the I/Q
output of the KX3 (with the menu ON) into my PC sound card, line in. Nothing
happens using the HDSDR software on the waterfall although I can control the
KX3. Not receiving signals, just noise. Question: What sound cards
@mailman.qth.net
Sent: Wednesday, May 22, 2013 1:27 PM
Subject: Re: [Elecraft] KX3 and P3 Adapter
... Not receiving signals, just noise. Question: What sound cards are
people finding useful? My generic Realistic PC sound card is apparently
inadequate
Ron,
Try using the Mic In on your soundcard. The I/Q signal levels are
rather low.
73,
Don W3FPR
On 5/22/2013 4:27 PM, KM4VX wrote:
Must be some interest in the topic!! I have a line connected from the I/Q
output of the KX3 (with the menu ON) into my PC sound card, line in. Nothing
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KX3 and P3 Adapter
Ron,
Try using the Mic In on your soundcard. The I/Q signal levels are
rather low.
73,
Don W3FPR
On 5/22/2013 4:27 PM, KM4VX wrote:
Must be some interest in the topic!! I have a line connected from the I/Q
output
IT UP!
Mark
KE6BB
From: Ron D'Eau Claire r...@cobi.biz
To: elecraft@mailman.qth.net
Sent: Tuesday, May 21, 2013 10:11 PM
Subject: Re: [Elecraft] KX3 and P3 Adapter
It may come as a huge shock to many on this e-mail reflector, but there are
a significant number
Well then, you better get rid of your Elecraft radios and go back to some
analog stuff with drifting VFOs and best guess frequency dials.
Maybe go way back to some Central Electronics exciters (See the current QST)
where we converted Command Set transmitters to VFOs and went to heroic
lengths
Eric and all:
I recall seeing a KX3 at the Elecraft Booth running a spectrum
display with a tablet and thought: When was this added?. I guess
this is the HDSDR or iSDR sw panadapter?
Even though I use many soundcard based sw, there lurks many more
round the corner, apparently.
Speaking
-Original Message-
From: Wes Stewart [mailto:n...@yahoo.com]
Sent: Wednesday, May 22, 2013 5:45 AM
To: elecraft@mailman.qth.net; Ron D'Eau Claire
Subject: Re: [Elecraft] KX3 and P3 Adapter
Well then, you better get rid of your Elecraft radios and go back to some
analog stuff with drifting
We were showing an iPad running iSDR for the panadapter with the Griffin
iMic audio interface between the iPad and the KX3's IQ output.
73,
Eric
elecraft.com
On 5/22/2013 8:45 AM, Edward R Cole wrote:
Eric and all:
I recall seeing a KX3 at the Elecraft Booth running a spectrum display
with
[elecraft-boun...@mailman.qth.net] On
Behalf Of Eric Swartz - WA6HHQ, Elecraft [e...@elecraft.com]
Sent: Wednesday, May 22, 2013 10:04 AM
To: Edward R Cole
Cc: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] KX3 and P3 Adapter
We were showing an iPad running iSDR for the panadapter
Swartz
- WA6HHQ, Elecraft [e...@elecraft.com javascript:;]
Sent: Wednesday, May 22, 2013 10:04 AM
To: Edward R Cole
Cc: Elecraft@mailman.qth.net javascript:;
Subject: Re: [Elecraft] KX3 and P3 Adapter
We were showing an iPad running iSDR for the panadapter with the Griffin
iMic audio
Is there an Android equivalent?
73, doug
On 22-May-13 17:04, Eric Swartz - WA6HHQ, Elecraft wrote:
We were showing an iPad running iSDR for the panadapter with the Griffin
iMic audio interface between the iPad and the KX3's IQ output.
73,
Eric
elecraft.com
On 5/22/2013 8:45 AM, Edward R Cole
...@elecraft.com; Edward R Cole; Elecraft@mailman.qth.net
Subject: Re: [Elecraft] KX3 and P3 Adapter
That is exactly how it works for me... Works with iPad or iPhone. I am using
the lighting version of the camera adapter with my iPad Mini even.
Jeff, K7GDE
On Wednesday, May 22, 2013, Chris Tate
https://www.google.com/search?q=android+sdr
wunder
K6WRU
On May 22, 2013, at 11:00 AM, Doug Faunt N6TQS +1-510-717-1197 wrote:
Is there an Android equivalent?
73, doug
On 22-May-13 17:04, Eric Swartz - WA6HHQ, Elecraft wrote:
We were showing an iPad running iSDR for the panadapter with
Eric,
Do you have a recommendation for isolating the audio lines when operating
portable? In the past, I have had issues getting noise around center freq
particularly.
Homebrew, DIY, don't care. Looking for small, lightweight and effective.
Thank you!
73,
Christian
AK4VV
On May 22, 2013
Umm... I don't know how else to put this but... Eric, -you- started the
rumor. Back on 18-Dec-2011, while we were waiting on our KX3s, you posted to
this list. For brevity's sake, I have not copied out the entire exchange
that was going on at the time. I know you have a lot of irons in the fire
Eric has posed a question regarding the source of the rumor about the
development of an adapter to use the P3 with the KX3. In the spirit of full
disclosure I quote the following from the Elecraft archives:
Not so. We also plan to offer a small IQ to P3 adapter for the KX3, which
will
give
It's not quite that simple. To be really useful, the KX3 would also have to
support the special protocol we use between the P3 and K3 that keeps track of
VFO frequencies, modes, filter bandwidth, etc. There's quite a bit of firmware
involved. But I agree this would be a nice addition.
73,
On 5/21/2013 10:57, Wayne Burdick wrote:
It's not quite that simple. To be really useful, the KX3 would also have to
support the special protocol we use between the P3 and K3 that keeps track of
VFO frequencies, modes, filter bandwidth, etc. There's quite a bit of firmware
involved. But I
Well there you go! Mea Culpa. :-) The internet forgets nothing. I
apologize for the confusion on this.
Clearly I was the source of the 'rumor' back in 2011. It is now obvious
to me that it is easy in the 'fog of battle' to forget what we may have
typed in a quick email reply several years
On 22/05/2013, at 2:56 AM, Alton Barkley alton.bark...@cogeco.ca wrote:
I use my KX3 as a base station. I operate QRP exclusively so I don't need
the amp. I may pick up the FM module. But I will tell you this. I'd buy an
KX3/P3 adapter and a P3 instantly if Elecraft offered that setup
Understood, Wayne. I recognized that full functionality would require
more than just the hardware. I (and others) would still like to see
this developed, as time and resources allow.
Thanks for your response.
Bruce
N1RX
On Tue, 21 May 2013 07:57:20 -0700, Wayne Burdick
On 5/21/2013 18:25, Matt VK2RQ wrote:
On 22/05/2013, at 2:56 AM, Alton Barkley alton.bark...@cogeco.ca wrote:
I use my KX3 as a base station. I operate QRP exclusively so I don't need the
amp. I may pick up the FM module. But I will tell you this. I'd buy an
KX3/P3 adapter and a P3
Eric or Wayne, assuming the KX3/P3 interface is feasible, is it possible to
build a PX3? A small monitor scope, perhaps half the size or less of the
KX3? The P3 isn't what I would call portable. Having something small, even
with less of a feature set than a P3, would make a great travel companion.
On 22/05/2013, at 11:31 AM, Alton Barkley alton.bark...@cogeco.ca wrote:
On 5/21/2013 18:25, Matt VK2RQ wrote:
On 22/05/2013, at 2:56 AM, Alton Barkley alton.bark...@cogeco.ca wrote:
I use my KX3 as a base station. I operate QRP exclusively so I don't need
the amp. I may pick up the FM
Hear, Hear !
A K2-sized P3-like box ... Elecraft would have my instant order. (:-)
73!
Ken - K0PP
On Wed, May 22, 2013 at 4:28 AM, Matt VK2RQ matt.vk...@gmail.com wrote:
On 22/05/2013, at 11:31 AM, Alton Barkley alton.bark...@cogeco.ca wrote:
On 5/21/2013 18:25, Matt VK2RQ wrote:
On
It may come as a huge shock to many on this e-mail reflector, but there are
a significant number of us who would rather never see a computer in the
hamshack. Today most of us live with the darn things all day every day and
significant number of us, like yours truly, enjoy a respite from the
And some of us would like to see an end to the seeming-less endless number
of 'boxes' that we have to connect just to have a few niceties...:-)
Black Box Overload.sigh!
:-)
On 22 May 2013 15:11, Ron D'Eau Claire r...@cobi.biz wrote:
It may come as a huge shock to many on this e-mail
br/Funny, new radios are computers. Just the user interface is different.
Would you rather have touch screens or voice commandsbr/br/George,
W6GFbr/br/Sent from Yahoo! Mail for iPad
__
Elecraft mailing list
Home:
Sounds like a tablet app to me. Where is the Elecraft value
added over a hardware interface to a tablet and an app?
Cheers - Bill, AE6JV
On 5/22/13 at 9:33 PM, kengk...@gmail.com (Ken G Kopp) wrote:
A K2-sized P3-like box ... Elecraft would have my instant order. (:-)
Great to hear a KX3 amplifier will soon be available from Elecraft. I have
no interest in adding power to my KX3 QRP rig, but I am looking forward to
Elecraft selling the adapater so we can use the KX3 with the P3. I hope in
the rush to get the amplifier to market Elecraft has not forgotten its
I'm not sure where this rumor was started. While we certainly would like to do
something like this, we have not announced that we are developing it. We do not
have an active project to do this at this time.
We have been absolutely maxed out in engineering on many other projects,
including the
@mailman.qth.net
Subject: [Elecraft] KX3 AND P3 ADAPTER
Good to see the KX3 accessory amp and tuner will soon be available. I am
more interested in the adapter planned for using the KX3 with a P3, since I
find the panadapter scope very useful in checking band conditions and
basically just lots
Good to see the KX3 accessory amp and tuner will soon be available. I am more
interested in the adapter planned for using the KX3 with a P3, since I find
the panadapter scope very useful in checking band conditions and basically
just lots of fun. Any information on when this adapter for the KX3
36 matches
Mail list logo
