Kevin,
While that may be an interesting exercise, it only takes one dit for the
KPA/KAT500 to sense the frequency and react accordingly.
The only thing missing is the ability to track the VFO frequency during
receive.
73,
Don W3FPR
On 8/31/2019 7:33 PM, Kevin McQuiggin wrote:
Hi Andy:
"If I can interface the [KX3/KXPA100] combo to the antenna/tuner, then there
would be full, seamless integration as there is with the K3. That’s the goal."
I believe I have achieved a level of integration of KAT500/KPA500 with my
TS-590S that exceeds the integration available with the K3. My
Hi Andy:
Thanks for the suggestion. Using the computer would let me control the KAT500
and KPA500 for sure, but what I am looking for is seamless band tracking and
antenna output tracking between the rig (in this case KX3 and KXPA100) and the
[KAT500/KPA500] block.
If I can interface the
"where the second block [KAT500/KPA500] utilize essentially BCD for band data
and an “AUXBUS” signal that I have not yet found out much about."
You can fully control the KAT500 and KPA500 using their serial interfaces
without needing AUXBUS and without using the 4 discrete band interface.
Hi All:
I have the setup as described in the subject line. My KXPA100 is interfaced to
my KX3 using the short Elecraft CAT5 cable. I have recently added a
KPA500/KAT500 combo.
I noted from the manuals that the [KX3/KXPA100] must really be treated as a
generic external transceiver, and the
5 matches
Mail list logo