Lyle,
The high priority being given to the SUB IND is great news.
I suspect that a number of K3 users are already tuned in :-)
73
Stewart G3RXQ
> Having the Sub Rx work on a different band than the Main is a
very high
> priority work in progress. Stay tuned...
>
> 73,
>
> Lyle KK7P
>
> _
Hi,
2) When I want to hear main receiver in both ears I simply switch sub rx
off. It would be nice to be able to listen to sub rx in both ears as
well. Is it possible?
Yes this is missing. It would also be good to be able to turn the main
RX off at times, especially when using the internal m
I agree with everything stated but for my purpose, I want to monitor 6
meters while working the other bands...
Having the Sub Rx work on a different band than the Main is a very high
priority work in progress. Stay tuned...
73,
Lyle KK7P
___
Ele
Wayne
Will the DVR be accesible via RS232 command?
If so the (contest) software programmers can add functions key to
playback a recorded message. This will keep the fingers on the keyboard
and not on the front panel
Peter
PC2A
wayne burdick schreef:
I'm taking lots of notes for the next rev
> Do you mean to say that, as it is now, the sub receiver (2nd
> receiver) cannot be on a different band? What is the use of
> having a 2nd independent receiver if you cannot use it
> totally separate from the main receiver?
1. For tuning the same band you are CQing on. During the short
FAX 727-937-8834
NASFT 30210
W9DVM
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Iain MacDonnell -
N6ML
Sent: Wednesday, December 10, 2008 1:37 PM
To: [EMAIL PROTECTED]
Cc: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] Re: K3 Beta firmware rev
Ed Muns wrote:
Do you mean to say that, as it is now, the sub receiver (2nd
receiver) cannot be on a different band? What is the use of
having a 2nd independent receiver if you cannot use it
totally separate from the main receiver?
1. For tuning the same band you are CQing on. Dur
> Do you mean to say that, as it is now, the sub receiver (2nd
> receiver) cannot be on a different band? What is the use of
> having a 2nd independent receiver if you cannot use it
> totally separate from the main receiver?
1. For tuning the same band you are CQing on. During the short
Stan,
The K3 errata sheet lists under omissions - last bullet - "Independent
sub receiver settings for BAND PRE, ATTN, NB, NR, NOTCH".
So for *now*, independent band settings are not possible. It will be
available in a future firmware release. Keep watch on the firmware
notes to see when i
]
[mailto:[EMAIL PROTECTED] On Behalf Of Igor Sokolov
Sent: Wednesday, December 10, 2008 11:00 AM
To: wayne burdick; David Ferrington, M0XDF
Cc: Elecraft Reflector
Subject: Re: [Elecraft] Re: K3 Beta firmware rev. 2.72: updated DVR support,
etc.
I have used my K3 with the second receiver installed in
On Wed, 10 Dec 2008 22:00:13 +0500, Igor Sokolov wrote:
>It would be nice to be able to listen to sub rx in both ears as well.
Yes
Jim K9YC
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Sub
Igor Sokolov wrote:
2) When I want to hear main receiver in both ears I simply switch sub rx
off. It would be nice to be able to listen to sub rx in both ears as
well. Is it possible?
Yes, please! I really wanted this when working 40m in CQ WW SSB - when
doing the "listening my frequency and
I have used my K3 with the second receiver installed in CQWW CW as 8Q7DV.
Just two requests for the future firmware releases:
1) Would be useful to have two receivers work on different bands. I know it
is on the plan but this is so important that I have decided to remind about
it again.
2) When
DF
Cc: Elecraft Reflector
Subject: [Elecraft] Re: K3 Beta firmware rev. 2.72: updated DVR support,etc.
I'm taking lots of notes for the next revision :)
Wayne
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to p
I'm taking lots of notes for the next revision :)
Wayne
On Dec 10, 2008, at 12:48 AM, David Ferrington, M0XDF wrote:
Which playback? Message playback or the RX loop? I would guess you
mean Message playback and I would like that to stop if XMIT or a PTT
line is keyed too.
Can this be added as
15 matches
Mail list logo