Does this go back to the older manuals? I think I used Manual Ver C (no
100% certain, though) when I built K2 #1103 -- is it something I should know
about and check?
Both the rev G manual on the web and the rev G printed manual has the same
problem.
tnx.
Conway Yee
Conway,
From an earlier manual, there are .001 capacitors on the RF Baord at
C1, C2, C9, C17, C26 and C27 in addition to the ones that do appear in
the manual.
For the list of .01 capacitors, add C52, C53, C55, C58, and C61. Those
additions should make the numbers right.
The assembly
From an earlier manual, there are .001 capacitors on the RF Baord at
C1, C2, C9, C17, C26 and C27 in addition to the ones that do appear in
the manual.
Thanks. This completes my inventory of 0.001 capacitors.
For the list of .01 capacitors, add C52, C53, C55, C58, and C61. Those
additions
Conway,
From the Rev F manual, the bottom of the list of .01 uF capacitors is
C175, C181, C183, C184 and C186.
It looks like the height of the column stayed the same, but the width
was reduced - the number of capacitors per line is greater in the Rev F
manual than in the Rev G.
73,
Don
, 2010 7:51 PM
Subject: Re: [Elecraft] base K2 RF board
From an earlier manual, there are .001 capacitors on the RF
Baord at
C1, C2, C9, C17, C26 and C27 in addition to the ones that do
appear in
the manual.
Thanks. This completes my inventory of 0.001 capacitors.
For the list of .01
On Sun, 3 Jan 2010, Don Wilhelm wrote:
It looks like the height of the column stayed the same, but the width
was reduced - the number of capacitors per line is greater in the Rev F
manual than in the Rev G.
Taking your hint, I downloaded the Rev D manual. Assuming no signficant
changes in
VP8NO writes:
There was a time, maybe 8-9 years ago when life was thought to be
too short for inventories, many just jumped in and got on with it, I
certainly did. 100% success.
Yes. I know. Given the instructions, I figured MOST would just jump in
and start building. As for me, I prefer to
Continuing my build of the base K2, I have identified two of the missing
designators in the Appendix A, page 1 0.001 and 0.01 capacitors. C1 and
C2 are 0.001 (102) capacitors as installed on p. 36, right column, 3rd
item. C1, C2 are NOT listed in the Appendix A pages 1-3.
For the 0.001 uF (102)
Conway,
Are you telling me that *that* printing error has not been corrected
yet? The printer chopped off part of the component listing in the parts
list. Ron (the holder of the documentation) tells me that the master is
correct. I discovered this a while ago while trying to use the parts
9 matches
Mail list logo