: Frank O'Donnell
To:"elecraft@mailman.qth.net"
Subject: [Elecraft] Rig control error with K3S and WSJT-X on 30 meters
Message-ID:<792c3760-8000-ef9b-93d1-30dafa060...@inkbox.net>
Content-Type: text/plain; charset=UTF-8; format=flowed
Over a period of time I've noticed an occas
Hi,
See:
https://www.nk7z.net/rfi-now-house-cleaning/
I has similar issues, and solved them via the process described on my
web page.
That is Part two of a three part article on removing RFI, and
understanding your RF environment. This part covers self induced RFI,
which is what I suspect
Band specific problems are nearly always the result of common mode RFI
(RF on the feedline/rig/CAT cable). Start by testing into a dummy load
or with QRP (<5W) output. After that, use the normal common mode
elimination measures, quality chokes at the antenna feedpoint(s),
bonding all of the
Over a period of time I've noticed an occasional error when transmitting
FT8 on 30 meters with my K3S using WSJT-X. A couple of seconds into a
transmit cycle, WSJT-X will display a "Rig control error" box, and I
start hearing the rig's modulated audio output on its own speaker. This
only
You can adjust the fldigi waterfall height with a menu.
Configure / Waterfall / FFT Processing, then there is a slider.
The max is 160 pixels. Would you like it bigger?
Also, you can do this:
Configure / Waterfall / Mouse, then check the box Left click replays
history
Then when you click on a
Sorry, the strong to type in for Insert text on single left click is
FREQ
Leigh/WA5ZNU
On 03/09/2011 10:07 AM, Leigh L. Klotz Jr WA5ZNU wrote:
You can adjust the fldigi waterfall height with a menu.
Configure / Waterfall / FFT Processing, then there is a slider.
The max is 160 pixels. Would
I just tried FLDIGI recently and liked it very much. I like that it is a
truly cross-platform program so that no matter what type of computer I am
using - Linux, Windows, etc.- I have a program with the same interface to
use.
I recommend the Belkin F5U409 USB to Serial adapter. I have used
As has already been mentioned, SignaLink/USB has no provisions for rig
frequency control. Also you should note that DigiPan itself has no
provisions for rig control. If you are content to adjust frequency
manually then DigiPan is a very nice, /simple(!),/ program, perfectly
adequate for BPSK31
I am using Puppy Linux and have installed FLDIGI. Is anyone using this to
control their K2 and/or the K3?
Being a Linux dummy...I would be willing to install some other logging/control
program, IF there are howtos for the Linux impaired.
Thanks
73 - k3hrn
Thom,EIEIO
Email, Internet,
I have been able to connect my IC-756PROII to the Ham Radio Deluxe rig control
software but when I hook up the K2 cable it will not connect.
I use the N3FJP logging and contest programs and none of them are able to poll
the rig either. Nor could I connect with N1MM.
Ideas?
Randy W6SJ
, there is a solution
to this vexing problem!
73 es gud dxing -- Don N4HH, K2/100 #2028, KAT100, K1 # 1456, etc, etc!
- Original Message -
From: Randy Johnson [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Tuesday, August 30, 2005 4:28 AM
Subject: [Elecraft] rig control
I have been able
://www.milwaukeehdtv.org
- Original Message -
From: Randy Johnson [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Tuesday, August 30, 2005 3:28 AM
Subject: [Elecraft] rig control
I have been able to connect my IC-756PROII to the Ham Radio Deluxe rig
control software but when I hook up the K2 cable
me too... works great...
Got to spend some good time visiting with Simon at the FDIM / QRP
thing at Dayton.
bill
At 07:56 AM 8/30/2005, Gregg R. Lengling wrote:
Are you using the K2 cable that you built with your rig, if not you
are not connecting properly. You can't use any old RS232
On Aug 30, 2005, at 4:28 AM, Randy Johnson wrote:
I use the N3FJP logging and contest programs and none of them are
able to poll the rig either. Nor could I connect with N1MM.
I had some trouble with N1MM at Field Day. I had tested with the
K2/100 before then, but when I got to the site
14 matches
Mail list logo
