RE: [Elecraft] K2 /100 RF output varies

: Mike Short [mailto:[EMAIL PROTECTED] Sent: Monday, June 02, 2008 01:00 To: [EMAIL PROTECTED] Subject: RE: [Elecraft] K2 /100 RF output varies According to Don, W3FPR: Mike, Check the KPA100 manual - during TUNE the power is reduced to 20 watts. If you need to TUNE at full power, you can either

Re: [Elecraft] K2/100 RF output varies

Mike, Check the KPA100 manual - during TUNE the power is reduced to 20 watts. If you need to TUNE at full power, you can either press the TUNE and DISPLAY buttons together, or rotate the power knob to the power level desired after the TUNE operation has started. 73, Don W3FPR Mike Short

RE: [Elecraft] K2 /100 RF output varies

Hello Mike, I've seen similar behavior on my K2 when using it with a transverter and power amplifier although it wasn't that bad. I was not able to solve the problem. I did a lot on earthing, wiring or positioning equipment and antenna direction, but it was consistent. I'm almost sure that it is