Re: [Elecraft] KAT2 - Bridge Null Adjustment problem

2005-09-17 Thread Sanger, Joseph
Well, my KAT2 saga continues. I did indeed find some unsoldered pins on one of the relays, and corrected this. Now, however, I seem to have the opposite problem. When trying to perform the CALn procedure, instead of having too much reflected power, I now have no power (forward or

RE: [Elecraft] KAT2 - Bridge Null Adjustment problem

2005-09-17 Thread W3FPR - Don Wilhelm
The first thing that occurs to me is that the single turn of wire through the center of T1 may be missing. The second thing is that T1 itself may not be properly wound or properly soldered. Check that the proper color wire is inserted into the proper holes (the color of the wire in hole 2 should

RE: [Elecraft] KAT2 - Bridge Null Adjustment problem

2005-09-17 Thread Sanger, Joseph
[mailto:[EMAIL PROTECTED] Sent: Saturday, September 17, 2005 4:28 PM To: Sanger, Joseph Subject: Re: [Elecraft] KAT2 - Bridge Null Adjustment problem Have you installed R6 yet? Page 17 - 5th step is to install a 47 ohm 1/4 watt resistor in the KAT2. This is the info to the K2 microprocessor to set