On 3/27/2019 19:01, Bob McGraw K4TAX wrote:
> With the radio in Data A mode, tap MENU, scroll to MIC SEL
YES!!!
the definitive answer !!
Apparently, I had mistakenly changed that setting.
thank you very much for a succinct answer!
--
73
Bob KD7YZ
AMSAT LM #901
__
Hi Don,
Not lately, but I've rented (Camaro); not with ALL the foo foo items,
but it went WAY fast in a big hurry! That was kinda the point of that
choice, apply more foot; go more fast. While waiting for the passenger,
I ran through the dash menu, made the readout settings the way I wanted
Rick,
Have you bought a new vehicle lately? My 2017 model (moving from a 2008
model) had more bells and whistles than I could imagine. The salesman
made an attempt at familiarizing me with the various functions, but the
mind became saturated during his demo, and I concentrated only on what
Heh, I'm the exact opposite. It's one of my evaluation test points that
if the device/software is truly user intuitive, friendly etc, the manual
become superfluous, rarely needed. But for picking out the nits and
finer subtle details these days, one must read because ultimately, they
matter.
It's amazing the things you can learn simply by reading the manual.
It's the first thing I do with an new product.
73, Jim K9YC
On 3/27/2019 4:01 PM, Bob McGraw K4TAX wrote:
With the radio in Data A mode, tap MENU, scroll to MIC SEL shown in
the VFO B area, and then using the VFO knob scroll
With the radio in Data A mode, tap MENU, scroll to MIC SEL shown in the
VFO B area, and then using the VFO knob scroll to Line In. Tap MENU to exit.
The SPEED/MIC knob should have the LED illuminated showing MIC. When you
turn the knob the VFO B area should show LINE xx where xx is the value
o
On 3/27/2019 08:02, Richard Ferch wrote:
> There is no ALC knob. Within the K3,
My bad to paraphrase it that way
"Line"
It was the way I dickered with the apparent ALC "BARS"
Now I can't get a TAP push or shove to say Line"
FT8 Data-A as usual
I am not concerned about the ancillary issue of
You didn't say so, but the "4 to 5 bars" phrase makes it sound as if you
are trying to use a digital mode. If so, what mode is the rig in? It should
be in DATA A. If you don't like the default filter setting in DATA A, use
the SHIFT/WIDTH (or HI/LO CUT) filter controls to set the filter bandwidth
w
On 3/26/2019 23:02, Nr4c wrote:
> Tap the knob to switch between Speed and Mic Gain. I think VOX is a hold
> function.
tnx Bill.
Tapp or push, all I see are Mic/
--
73
Bob KD7YZ
AMSAT LM #901
__
Elecraft mailing list
Home: http://mail
Tap the knob to switch between Speed and Mic Gain. I think VOX is a hold
function.
Sent from my iPhone
...nr4c. bill
> On Mar 26, 2019, at 7:32 PM, Bob KD7YZ wrote:
>
> So I was following some really great help from Don re ALC on my SSPA
> .and I didn't get back to using the K3 .. was Sa
10 matches
Mail list logo
