RE: [Elecraft] K3 Memory Recall - Acting Like Band Select

Hi Jim Memories 0-9 are quick memories which are accessed by the commands M-V and then the keypad number. I have programmed each of those memories with each band 160 thru 6 metres so that I can change bands without having to use the up/ down button. I have also programmed the M1 thru M4 buttons

RE: [Elecraft] K3 Memory Recall - Acting Like Band Select

Thanks, Barry. This should be true if CONFIG: MEM 0-9 is set to BAND SEL, but I have it set to NOR. In which case, 0-9 should NOT be in the band select mode and ALL memories should be accessable with MV ## MV...unless of course I missed something in the updates :) Jim Barry Simpson wrote:

Re: [Elecraft] K3 Memory Recall - Acting Like Band Select

Jim, With MEM 0-9 set either to BAND SEL or NOR, the 0-9 buttons are *still* quick memories. You cannot enter two digits from the keypad - you must use the VFO A knob to select memories with numerical value addresses greater than 9. 73, Don W3FPR Jim - W6VAR wrote: Thanks, Barry. This

RE: [Elecraft] K3 Memory Recall - Acting Like Band Select

Jim My memory 0-9 is set to nor. I don't think you can select other than 0-9 via the keypad whichever config setting you are in. 73 Barry VK2BJ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the

Re: [Elecraft] K3 Memory Recall - Acting Like Band Select

Okay, MY memory is failing me. Just reread the manual and quick memories it is for 0-9 and VFO-A for the rest...must have been a different radio. Is 42 to early for senility? Thanks all! Jim Jim - W6VAR wrote: I've updated to 2.67 and I have Mem 0-9 set to nor, but i cannot access