Following K3KO's suggestion, I checked the mods on the website, and sure
enough, there was one in September 2009 that addressed noise heard on
some K3s when tuning. From the description, it did not seem to address
noise on the main RX when tuning the sub-RX. Mine does not make noise
on the
An iMic will give you separate in/out audio jacks.
73, Mike NF4L
On Dec 12, 2012, at 2:10 AM, Bill Frantz fra...@pwpconsult.com wrote:
On 12/11/12 at 9:14 PM, k6limae...@gmail.com (Rick Prather) wrote:
Not sure why you feel the need for the SL [SignaLink] with your K3 but
that's up to
Guys - thanks for the replies!
By now you've probably read my post that I got it all working. As to having the
SLUSB, after reading the K3 and KE7X manuals, it just seems that using the
external sound card like the SLUSB makes it a little easier. Haven't looked at
the iMic, but with the SLUSB,
Mike,
That has been true up to this year. But I believe that the latest iMac has
gone over to the single plug system just like the Macbook Air.
73,
Oliver
W6ODJ
On 12 Jan. 2012, at 06:25 AM, Mike Reublin n...@nf4l.com wrote:
An iMic will give you separate in/out audio jacks.
73, Mike
Jim, Just make sure when adjusting the power your ALC reading on the
K3 must show 4 bars of ALC with the 5th bar just flashing. This is
counter intuitive based on other rigs but a necessity for the K3. If
you are using the line in gain or the TX control on the SLUSB to
regulate power you may be
http://www.ebay.com/itm/261141641722
Gil.
--
PGP Key: http://keskydee.com/gil.asc
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
If your selling it on FleaBAY why post it here?
Fred/N0AZZ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Gil G.
Sent: Wednesday, December 12, 2012 10:55 AM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] Selling my K2.
Seems like there is some confusion between iMics and iMacs on this thread :-)
At any rate since you are already using the SL no need for an iMic at this time.
BTW, lately my configuration for RTTY and PSK 31 has been to use Rumlog. It
uses the internal FSK function of the K3 and when
It's a good idea ...
Makes more aware of the sale ...
I've lready looked at it, even though I'm not an E-Bay regular
and wouldn't have known about it except for the posting.
73!
K0PP
On Wed, Dec 12, 2012 at 5:08 PM, Fred Smith m...@mo-net.com wrote:
If your selling it on FleaBAY why post it
I make it a point of never buying any radios on eBay usually there is a
problem with them or they wouldn't be there. If the items are listed on the
ham related forums you can most of the time (or I do anyway) feel more
confident that they are in the condition listed. In no way have I ever felt
I notice the KPA500 has two serial ports (in/out). Is it permissible to add
it to the K3/P3 chain or will that cause issues. So far the K3/P3 serial
chain works fine when loading K3 firmware.
73
jim ab3cv
__
Elecraft mailing list
Home:
Looks like I misspoke when I said I could leave the K3's PWR set at 90 and
adjust the RF output via the SLUSB. Doesn't quite work that way! RF power out
stays up in the stratosphere (PSK31 speaking, anyway) so I really do have to
set the K3 to about 25-30 watts out on the K3 and adjust the ALC
Hi Fred,
Sorry to hear about the bad experience on that transaction. I have had one
like that as well. Same kind of deal as yours.
Not all items on ebay are bad - the majority are legitimate and as
described. It has not at all been my experience that ...usually there
is a problem
with them or
No, the out port is for use with Kenwood rigs so the KPA can read freq
data.
Jim Rhodes K0XU
Sent from my Droid Razr Maxx
On Dec 12, 2012 11:36 AM, Jim Miller j...@jtmiller.com wrote:
I notice the KPA500 has two serial ports (in/out). Is it permissible to add
it to the K3/P3 chain or will that
Hi Jim,
No, the KPA500 can not be daisy chained with the K3/P3 serial connection
via these RS-232 ports.
The KPA500 serial ports are totally independent functions and are -not-
daisy chain In/Out ports. One connects directly to your PC for firmware
downloads and control via KPA500 utility.
Jim, from the Owner's manual on page 7:
Optional: RS232 (XVCR) {8} connects the KPA500 to a Kenwood transceiver
using a standard 9-pin
serial cable. This connector cannot be used to update KPA500 firmware (see
pg 14)
73, Ron AC7AC
-Original Message-
From:
On Wed, 2012-12-12 at 12:20 -0600, Fred Smith wrote:
I make it a point of never buying any radios on eBay usually there is
a
problem with them or they wouldn't be there.
I never had a problem with Ebay, but I am very careful. I only accept
Paypal and check the seller's rating. If he doesn't
Jim,
Due to the way the K3 controls power, you must ignore the many instances
in Data software instructions and other sites on the web which tell you
to set the power for maximum and use the audio level to control the power.
That just will not work for the K3 (or the K2 for that matter).
You
Very funny. But no one answered my question regarding memory editor. I put it
the VFO A frequencies and offsets and tones for the repeaters for the trip from
Westlake village to Mammoth but was wondering if I need to put in a frequency
for VFO B or does the offset automatically take care of
The other issue with the SLUSB audio level setting is that if you use a
program like DM780 to watch PSK (several conversations at once) then click
on one to use, the actual tones used will change. The audio drive at 1KHz
will be different than if you select 1.8KHz so the ALC response may (likely
Hi,
I got them both and updated with no problems. The problem with not being
able to change the auto tune VSWR threshold is fixed. I changed mine down to
1.5:1.
AB2TC - Knut
Dick Dievendorff wrote
KPA500 firmware 1.18 is now available on our beta web site listed below.
This version is
I just found there is a SSTV repeater in VK5 on 14236 and it requires a
1750Hz tone for access,
any way to do this ?
73
Cliff
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Where do I connect the cable on the back of my K3? Does it has to be a stereo
or mono cable?
73
Sent from my iPad 3G
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
G'day,
Not having a circuit I thought I'd just ask this one .
Do I have to worry about reversing the supply polarity on the KX3 ?
The knowledge will help me to decide whether to fit connectors to the power
cable and battery etc for long term portable use or whether I can get away
with
Peter Lambert wrote:
Do I have to worry about reversing the supply polarity on the KX3 ?
No. There's a reverse-polarity protection diode.
... whether I can get away
with the convenience of crocodile clips.
Sure. I'd use different-colored ones if possible, though, to avoid
accidentally
Only in FM mode. it is one of the CTCSS tone choices.
73,
Lyle Kk7P
I just found there is a SSTV repeater in VK5 on 14236 and it requires a
1750Hz tone for access,
any way to do this ?
__
Elecraft mailing list
Home:
The K2/100 is sold.
Darrell Bellerive
On 12-12-04 09:32 PM, Darrell Bellerive wrote:
Price lowered to $975 including shipping to Canadian Provinces and
Continental US. See my website for details http://va7to.ca
73, Darrell VA7TO
Darrell Bellerive
On 12-12-01 01:02 PM, Darrell Bellerive
27 matches
Mail list logo