Wow, that's a dedicated DX-er for you: you would have had to wait over 8 and a
half years to get the response! I don't think I'd hold my breath for a QSL card
within this lifetime, though ;-)
73, Matt VK2RQ
On 3 Apr 2015, at 2:28 am, Richard Jubinville silve...@charter.net wrote:
How did I
But at least Intergalactic Buisness Mail
(IBM) delivers 24/7 and 365.
Harlan
NC3C
Sent from my Verizon Wireless 4G LTE smartphone
div Original message /divdivFrom: Matt VK2RQ
matt.vk...@gmail.com /divdivDate:04/04/2015 2:33 AM (GMT-05:00)
/divdivTo: Richard Jubinville
Hi Dan and others,
For a brief explanation how the KAT500 and KXAT100 tuners operate have a look at
http://www.ke7x.com/home/kat500-and-kxpa100-tuners
Cheers,
Fred KE7X
Author of:
The Elecraft K3: Design, Configuration and Operation 2nd ed
The Elecraft KX3 - Going for the summit
The Elecraft
After a long pause I started to operate in PACTOR again. My K3 behaves
differently today compared to earlier firmware some years ago. Current FW is
MCU 05.14, FPF 01.19, DSP 02.83.
In DATA A mode:
(1) PITCH shows N/A, in contradiction to the user manual. Seems to be fixed
at 1500 Hz. That's fine
The weekly Elecraft SSB meets Sunday at 1800Z on 14.3035
MHz. I will be NCS from OR. See you there.
73,
Phil, NS7P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
After posting my message about using an external frequency reference for a
K3 and a QS1R, I got some really nice input and feedback from W7AVK, K3KO,
N4ZR and NK4I. A big thanks to these gents for sending me input and
experience with different solutions.
All the input has been very useful this
Ten-Tec aand Alpha Amplifiers have been sold.
See the press release at:
http://tentec.com/
73
Bob W9KNI
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
I hope to get my new KPA 500 on Monday. Anyone that is using this and the
FTDX 3000 care to share their hook up experience etc?
Brian
W2BRM
NY
__
Elecraft mailing list
Home:
Hello.
I hope to get my new KPA 500 on Monday. Anyone that is using this and the
FTDX 3000 care to share their hook up experience etc?
Brian
W2BRM
NY
__
Elecraft mailing list
Home:
For the person who asked
I used the 15 pin Linear jack on the back of the FTDX-3000 to accomplish a few
things. First of all, I used Yaesu pin 2 (TX GND) as
the key line for the KPA500, rather than the Elecraft's separate phono cable.
Secondly, I used Yaesu pins 4, 5, 6 and 7 to supply
My K3 puts out no power in any mode, either on the SteppIR or into a dummy
load. It's not in test or split. TX INH is off. Holding tune results in the LCD
displaying 0 W, and the VFO A area changes to 2 dashes on the right, no digits.
Tune power is set to 50W, Power to 100W.
A 50W TX Gain
11 matches
Mail list logo