Courtney,
The 12V RCA plug on the rear of the K3 accomplishes this just fine with the
KPA1500, so I think you should be able to do the same thing. Current demand is
very small. I am not using it to power anything else.
73 John N5CQ
-Original Message-
From:
I assume the RPI is going to have some software that calculates and adjusts
automatically on the fly for network latency from said NTP server. Oh by the
way most all NTP servers get their time from an NIST time base...NOT GPS.
R. Kevin StoverAC0H
ARRL, FISTS, SKCC, NAQCC.
"If it doesn't work
I had to send my K3 infor repairs, so I will be using my KX-3 as my main radio
for the next fewweeks. But I haven’t got it working with Digital modes yet in
particular FT-8.
PC is a Win 10 and amusing a Signalink USB. I am able to receive fine in WSJT-X
but not transmit.
Settings in
This thread was closed several days ago. Please, -no- more posts on this.
Eric
Moderator
elecraft.com
---
Sent from my iPhone 6S
> On Aug 22, 2018, at 4:30 PM, wrote:
>
> The GPS system is vulnerable. The systems at NIST aren't nearly as
> vulnerable.
> .
Thanks to AI5II's suggestions got the Tx problem fixed. Changed the Rig to KX3
and PTT to CAT. So the Signalink Tigertronics guidance was not accurate, at
least for me. Also had Win4K3 running and it was using the KX3 comport. So
closed that program and now the KX3 is receiving and transmitting
Paul,
Do you have the KX3 set to VOX? If so, it should work.
Have you tried using PTT via CAT in your digital mode application - it
is more reliable than using PTT out of the SignaLink or VOX in the KX3.
Be certain you are driving the audio sufficiently. You must have 4 bars
solid on the
Great news. I hope it makes an appearance soon. Several years ago I
cobbled together a crude version of this functionality using a pair of
ancient Autek QF-1A audio filters. The left side filter was configured
as a low pass and the right was configured as a high pass. If I spent
enough time
This thread has already been closed.
Eric
Moderator
elecraft.com
---
Sent from my iPhone 6S
> On Aug 22, 2018, at 4:38 PM, wrote:
>
> I assume the RPI is going to have some software that calculates and adjusts
> automatically on the fly for network latency from said NTP server. Oh by the
>
For the last 10 years I've been using the K2 setup below for digital
comms (W32,FLDIGI) with no problems. Now I'm trying to use the same
exact setup - no changes in cables, etc - for WJST-X (v1.9.1 r8747 in
FT8 mode) and the PTT is not working with the same parameters. The
"Test PTT" button is
Phil,
I strongly recommend that you use PTT via CAT command for digital modes
with the K2.
If WSJT-X is not correctly communicating that command to the K2, look to
the help files and forums for WSJT-X for the answer.
Some USB to serial adapters do not like to work at the low 4800 baud
* On 2018 22 Aug 00:50 -0500, TL_Netvision wrote:
> Yes I do the same + I try a "save config." B4 I upgrade anything.
I have quite a few configurations saved, but I don't recall ever having
to use any of them for restoration. Trouble is that looking at the file
doesn't give a clue as to what is
Hi all concerned:
Equipment for sale, all simply excess to my needs:
K3/0, the LARGE one, some cables to K3$450
KRX3A, with 2 filters: 2.7K, 1.0k, mtg hdwr, cables $500
SP3
SP3 is sold, tks.
-
Brgds,
Dave, N3HE
Cincinnati OH
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
The GPS system is vulnerable. The systems at NIST aren't nearly as
vulnerable.
GPS is a navigation system it is not a time keeping system. Every ballistic
missile this country still has uses INS not GPS. It's "jam proof".
R. Kevin StoverAC0H
ARRL, FISTS, SKCC, NAQCC.
"If it doesn't work the
Thanks Fred of ypur great analysys, those that we can have from a University
Professor as you - a true gift for us, amateur radio ops. I have read it
from your great book about K3S-P3, but it is very interesting even for
reading replica. Anyway I asled hoping exist a setting for alignement of
The configuration file is not intended to be readable by users, but is a
file that can restore your K3's configuration painlessly in case you
have to do an EEINIT (a reset to factory defaults).
That reset will lose all your option settings and calibration
information. If you do not have a
KRX3A is sold, tks.
-
Brgds,
Dave, N3HE
Cincinnati OH
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
The Saved Configuration file is automatically date and time stamped.
Although I don't know of a way to "see what's different", before I go
tampering with any of the values in my K3S, I save a configuration.
That way when and yes I said "when" I get things messed up I can easily
go back to
Hi Don and all,
Thanks for info.
I got K1BKLTKIT kit for Jakub already.
Unfortunately still looking for KAT1... and possibly KFL1-2.
-
73 - Petr, OK1RP
"Apple & Elecraft freak"
B:http://ok1rp.blogspot.com
G+:http://goo.gl/w3u2s9
G+: http://goo.gl/gP99xq
--
Sent from:
my new kpa1500 is due in today and just thinking about setting it up...
so with my FT5000 and microHam keyer 2 jack #21 provides 13.8 volts
at up to 200ma ... is this enough to hook to jack 8 on the back of the
kpa1500 to power it on when ever I turn on the ft5000? Any set up
advice/ideas
20 matches
Mail list logo
