Does anyone know the programmers reference code that I should send to
the RS232 in order to key the rig in CW mode. DM780 is capable of
sending CW without using a WinKey or other external device. I would like
to know what command is being sent to do that. Thank you Feel free to
email direct
To all:
I'm enjoying this thread because it directly addresses my two greatest
concerns. First of course is human error. The second concern is connector
problems.
Elecraft has addressed the first by using kit options on the K3/P3/KPA500 so
that I'm more aware of the result of my actions, and
Testing.
--
R. Kevin Stover
AC0H
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
test,
NS7P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this
First off I was replying to N8NFR's request for info how to do
this. Don't shoot the messenger!
The requirement for simultaneous connection to both antennas adds the
need for DPDT relays. Of course a simpler set up could use simpler
relays. I have not heard whether the KPA-500 has a bypass
Let's be clear. There is absolutely no problem building a very wide range
antenna 'tuner' that can handle kilowatts of RF at an SWR of 10:1 or even
much higher.
Such a tuner is very easily fabricated, but requires physical space with
large switches to avoid corona discharges and uses big
Actually the AGC is generated by the DSP in software. The signal VIFGAIN1
coming from a D to A converter (AD5302A) if fed back to the IF amplifier to
control the receiver's gain. After the DSP filter reduces the bandwidth,
the AGC is adjusted by the DSP. It's all done using mathematical
wa9fvp wrote:
Actually the AGC is generated by the DSP in software. The signal VIFGAIN1
coming from a D to A converter (AD5302A) if fed back to the IF amplifier
to control the receiver's gain. After the DSP filter reduces the
bandwidth, the AGC is adjusted by the DSP. It's all done using
I have a K3 / 10 that I built last December. 800 CW QSOs and 9 recent PSK
QSOs. Firmware is version 4.22
I set up PSK according to the instructions on the Elecraft web site. Other
than setting vox gain to 2, from 1, I had no problem getting on PSK. I did
nine PSK QSOS and now this:
Clicking on
Sorry for the bandwidth...
NF8J
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please
Hi Wayne
Just one level more of explanation on this.
Fully configurable in SW can be two things... End user configurable or
factory configurable. to accommodate countries where we have been so
fortunate to get access to a large part of 60m and that in VFO mode. (5250
– 5450)
Can i take it
Re-post: sorry, problem with original::
Thanks for all the comments gentlemen.
Regarding the RX antenna, I've been reading lots lately on the subject
trying to figure what will work given my pathetic QTH space limitations and
HOA restrictions.
Quite a challenge indeed. In fact, more of a
Thanks for all the comments gentlemen.
Regarding the RX antenna, I've been reading lots lately on the subject
trying to figure what will work given my pathetic QTH space limitions and
HOA restrictions.
Quite a challenge indeed. In fact, more of a challenge than I'd like. I may
have to be content
Hello- I have read something about this problem before on the email
reflector, but do not remember what people said about the problem with
the k3 dropping power on 6 meters. I was sending cq in cw, and about
the 3-4 sequence of sending cq in cw the power dropped down to 5 watts
or so, or at
I'm in the process of trying to bring an early K2 (serial#653) kicking and
screaming
into the 21st Century, I'll also point out that I'm not the original builder
of this
radio.
For a while I've not been overly convinced about the sensitivity and dynamic
range of this particular example, it
Friends
KPA500 ordered on 26/4/11.
KPA500 Kit (serial NK) was dispatched in CA, via UPS 14/7/11, arrived in UK
today 15/7/11
Out for delivery 18/7/11
Very quick service indeed.
Thanks Vickie!
Ken..G0ORH K2, K3, P3.
Sent from my iPhone
LinkedIn
Ian Liston-Smith requested to add you as a connection on LinkedIn:
--
Robert,
I'd like to add you to my professional network on LinkedIn.
- Ian
Accept invitation from Ian Liston-Smith
LinkedIn
Richard Arland requested to add you as a connection on LinkedIn:
--
Robert,
I'd like to add you to my professional network on LinkedIn.
- Richard
Accept invitation from Richard Arland
On 7/13/2011 8:32 PM, Ron D'Eau Claire wrote:
Station KPH/KFS in California participated in the Night of Nights
operations this week marking another anniversary since the end of CW as the
mainstay of Safety of Life at Sea (SOLAS).
Managed to snag KPH QSA 5 [no surprise there!] and KLB at about
I second W3FPR's motion of 4 outputs for each KAT500. I had asked for 5
but will make do with 4. Since I operate from 3 different QTH's several
times a year, I need to keep the antenna setup simple, which requires either
the amplifier or the tuner to do automatic bandswitching on a
See the Programmer's Reference:
http://www.elecraft.com/manual/K3_Pgmrs_Reference_Rev_C14.pdf
and read the information on the KY; command.
73,
... Joe, W4TV
On 7/14/2011 8:20 PM, N6MQL wrote:
Does anyone know the programmers reference code that I should send to
the RS232 in order
If you look at the K3 Programmer's Reference, you will find the KY
command.
The information in that manual will give you the syntax and other info
you need to know.
Unless you are writing your own software, I suggest that you try it from
the K3 Utility terminal window.
73,
Don W3FPR
On
KPA-500 #148 up and running ...
Another great product and matching perfectly my Elecraft line (K3 + P3).
73,
Claus, EI7JZ/OE6CLD
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Jack,
My K2 is setup as
http://wilcoxengineering.com/projects/amateur-projects/44-psk31-k2
I've never really had a need for any narrow filtering. It would be nice
to have a tunable notch to deal with the occasional strong signal though.
HTH... 73, Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40)
On Thu, Jul 14, 2011 at 12:35 PM, Ian Kahn ak4ik@gmail.com wrote:
Does anyone have any experience with Elecraft's KRC2 band decoder/switcher
and the Dunestar Model 600 multi-band bandpass filter? I'm contemplating
this combination for use with my K3 and would love the opinions of anyone
Yes, you'll be able to use the full 5-MHz allocation for your country.
73,
Wayne
http://www.elecraft.com
On Jul 15, 2011, at 8:21 AM, Michael Jensen m...@the-jensen-dk.net wrote:
Hi Wayne
Just one level more of explanation on this.
Fully configurable in SW can be two
Eric, I think those plots have been desirable for a long time.
Thanks from Elecrafters everywhere!!!
73
Mike R
Sent from my spy ring
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I'm using 2 W2 in my antenna system.
They are side by side on the shelf and the Remote sensors are pretty much
the length of the interconnecting cable away.
I'm getting interaction between the meters. I getting readings one the one
I'm not transmitting on, as well as the one in use.
I'm not sure
Jack,
I do not use the NUE-PSK Modem, but I can respond to your question about
the K2 filters.
I highly recommend that you activate the RTTY filter set (in the
secondary menu). That filter set allows you to use the SSBCr
compression setting which should always be set to 1-1. The
I read somewhere of a keyer other than the WinKey that was compatible with
the WinKey command set. I don't recall where I saw it, but thought that this
would be a good place to ask?
73
Gregg
__
Elecraft mailing list
Home:
Jack,
As Bill W4ZV confirmed one of the AGC loops uses a sampling point which is
after the roofing filters but before the DSP and its narrow filter(s).
If the unwanted signals are greatly attenuated by the DSP's filter, but they
are either within the roofing filter's passband or in the roofing
Hi Greg,
N0XAS' MasterKeyer does, take a look here:
http://www.hamgadgets.com/index.php?main_page=product_infocPath=21products_id=106zenid=catn9naq203dep356rr2q0k796
73, Olli - DH8BQA
Elecraft K3 #4546
- Original Message -
From: Gregg W6IZT w6...@bellsouth.net
To: 'Elecraft
microHAM interfaces, microKEYER, CW Keyer, microKEYER II, DigiKeyer II
micro2R and MK2R/MK2R+ include K1EL WinKey integrated circuits.
The HamGadgets MasterKeyer MK-1 includes K1EL emulation.
73,
... Joe, W4TV
On 7/14/2011 5:34 PM, Gregg W6IZT wrote:
I read somewhere of a keyer other
Received KPA500 sn 172 on Wednesday (ordered April 8). Assembled it last
evening and today. Assembly went well, but when I reached the end and
went to install the fuses, I noticed the power entry module was missing
the fuse block that goes in behind the little door to the right of the
power
The US Interface Navigator also includes the K1EL Winkeyer IC and is an
excellent choice for an interface for your station.
If you are just looking for a simple keyer, then the K1EL Systems WKUSB is a
bargain in my book.
I own both.
73s Jim, W4ATK
Jim, W4ATK
JIM ROGERS, W4ATK
Mike,
Does that happen with a dummy load? If it only happens with an antenna,
you have a lot of RF in the shack that should be dealt with in your
antenna system.
Do you have a stereo plug on the end of that hand key cable? If it is a
mono plug it could be causing that condition. You must
~
N2CQ QRP CONTEST CALENDAR
July 16 To August 15, 2011
~
Digital Mode Club (DMC) Contest (RTTY) ... QRP Category
Jul 16, 1200z to Jul 17, 1200z
Rules:
Hello:
I hadn't started up my K2/100 in awhile and I wanted to give it some
exercise today. When I hit the power button, I was surprised to see it in
transmit mode with a hum/tone coming from the speaker. I immediately shut it
down, disconnected everything and hooked up a battery and a dummy
Check to make sure the coax connectors are tight. Sounds like a
grounding/stray rf issue, but I could be very wrong. If the connectors are
tight then your antennas may be picking up rf from one another. Try
grounding the unused antenna system, then transmit. If you have no issue,
then the
Mark,
Can you transmit OK in SSB mode?
If so, the audio level is your problem. You can check in TX TEST so you
generate no RF.
Adjust the audio level from your soundcard (and/or the Line-in level on
the K3) to produce 4 bars with the 5th one flickering on the ALC meter
(that is the no-ALC
Sometimes computers do things their own way. Double check that your sound
card selection has not changes. Also make sure your data selection on the K3
is set properly
George, W6GF
--- On Fri, 7/15/11, Don Wilhelm w3...@embarqmail.com wrote:
From: Don Wilhelm w3...@embarqmail.com
Subject:
I have not used my K3/P3 since early January. Now I want to give the system
another try to see how it really compares to my other radios.
Basic question: When I update to the latest firmware for both the K3 and P3,
are all of the previous updates included in the most current one? I should
know
Of course they are...go for it.
I gave up comparing over 3 years ago...:-)
Unless you have very good test equipment that is calibrated then the
difference will only be subjective at best if the equipment being tested is
technically very similar. But I could be wrong...:-)
Gary
On 16 July 2011
Jamie,
There are several possible causes, so the first thing you should do is
remove the KPA100 completely from the base K2. That will get the output
power down to something more reasonable and allow you to do the
measurements that will eventually lead to tracking down the source.
After
Tom,
You do not have to update incrementally, just load the latest. As in
the commercial It's all in there.
73,
Don W3FPR
On 7/15/2011 7:12 PM, Tommy Alderman wrote:
I have not used my K3/P3 since early January. Now I want to give the system
another try to see how it really compares to my
Thanks to NV1B, K9ZTV,VK4FD, W3FPR and to Dick for the quick response. I
just updated the K3 and P3. Now if I could just get DELAY set correct so I
would not hear any 'pops' in my audio when keying my 9500 amp, all would be
well. It will take me a while to get back into the K3.
Thanks again!
Tom
Tom,
I know nothing about that particular amplifier, but I offer a few in
general facts.
Pops in the K3 audio while keying an amp could be a sign of hot
switching in the amplifier. Try increasing the keying delay in the K3
to see if that eliminates it. If not, check the relay pull-in time
Don,
I suspect that Tom wants to run in CW+ (or QRQ) mode, and I believe in this
mode the TX DLY delay parameter must remain at 8 and this effectively
produces a delay from KEY IN to KEY OUT on the order of 4 to 5 msecs. I
also believe it can not be increased by changing TX DLY?
My guess is
To all,
And especially to those who took the time to answer some of my questions during
the build, thank you! I still have options to build and install but my basic
configuration K2 is now Air Worthy and have been making contacts since
yesterday and having a ball. A whole different world
I suspect my days of QRQ are about over as right now I'm doing pretty good
to copy at just 70 wpm!
My primary interest is getting 'smooth' full QSK at contesting speeds, i.e.,
26 to 36 wpm. If I can get that, then I'll be happy. I did drop TX DLY from
20 down to 8 and with the K3 barefoot, it
I understand that about the HAGC1. Its purpose is to keep the level within
the range of the A to D. If this signal is too big the A to D converter U23
will over range and the DSP is unable to perform the mathematical functions.
The HAGC1 is fixed and is not adjustable by the user. VIFGAIN1
Tom,
In the original release notes for QRQ mode, Wayne stated:
Note 2: If you use CONFIG:TX DLY to set external keying
delay, you may need to adjust its setting for QRQ CW use. Also,
any increase in the default (8 ms) may decrease the maximum
available CW speed.
It stil is not clear to me
Guys,
Trying to build K2 Noise Blanker. Have part in kit labeled 6n8J63. Missing
part for C12 (.0068uF Disk or Monolithic Capacitor). Is Elecraft trying to use
this 6n8J63 for C12? I looked up data sheets on the 6n8J63 and it is an
inductor, ceramic prehaps wire wound. This can't be right?
Hi Wayne,
Trolling through the emails from various sources, I get the impression that the
KX3 may have a 2M internal module option - in lieu of the ATU.
If that is the case, I have the following questions.
1) Will the 2M module power out be around 5W?
2) Are you considering 2M FM as well as
.0068uF is 6.8nF. That capacitor labelled 6n8 is the right one (ignore
the J63, which refer to the tolerance etc).
73 Dave G3YMC
On 16 Jul 2011 at 0:44, vicki glover wrote:
Guys,
Trying to build K2 Noise Blanker. Have part in kit labeled 6n8J63.
Missing part for C12 (.0068uF Disk or
55 matches
Mail list logo