Hello Eric,
As mentioned by other group members, this topic appears from time to time. I
am the one in this forum who insist on the NR of K3 is not as good as my big
ICOMs.
I eventually find the answers for myself. I am a 99% SSB operator and my ears
can still hear above 12Khz. As a
Fred,
~90% of the really good ham apps initially written for Windoze runs in
Linux, sometimes much faster than in its native environment. The only
problem is to know HOW...
This list isn't a good place to advocate Linux (or any other OS),
however there is a general rule:
1. Try
2. If does
Sam,
I created an Elecraft folder in my directory and copied there the
utilities. Good idea is to use a file manager, I prefer Krusader because
it is a twin panel manager similar to Total Commander for Windows or
Norton Commander for DOS. This allows you to work with archives in the
same way
I'm not sure if I'm hearing a spurious emission or not. As an example
(and I know this may sound weird to some folks - that's just the way I
am ;) ):
The following paragraph is *not* the problem - it's what the problem
sounds like to me.
If I'm on a frequency and someone gets on a frequency
Johnny,
I agree with both you and Eric.
On CW I like the NR, APF and notch filter. Overall no complaints on CW.
Since I have had my K3's my complaint is with the NR on SSB. I agree with you
about the NR on the Icoms. Wish the K3 operated similarly on SSB. I find the
Icom NR less fatiguing with
Number 4 under OPERATION/TRANSMITTING on page 11, When driving the KPA500
with an Elecraft K3, use the K3's per-band power control to set the
amplifier output just below the desired peak output on each band.
That requires that you use the AUX to ACC cable between the K3 and the
KPA500 as shown
Eric -
What NR settings are you using on CW? I can't get rid of the background
white noise with the K3 NR like I can with my Orion NR. I wish I could!
My K3 is never 'silent' with NR turned on.
73 de K1ESE
John
__
Elecraft
John,
I have adjusted my Rx EQ to attenuate the higher freqs. Also, I
usually have the RF Gain and preamp set so that noise floor is just
audible. My Preamp is almost always off.
With AF Gain at 12 o'clock and RF Gain at 3 o'clock, engaging NR at
the 1-2 setting is VERY quiet. (This probably
KX3 beta firmware rev 1.61 (with DSP rev 1.23) is now available. See release
notes below.
You'll need the KX3 Utility application to download and install firmware. For
full instructions on loading beta releases, refer to our KX3 software page:
http://www.elecraft.com/KX3/KX3_software.htm
73,
I have a KRC2 that is presently using the AUX Bus input to drive an Array
Solutions remote antenna switch . At 100 watts , it is usable but at 1500
watts is unusable. This evening I even unplugged the 12vdc supply and it still
drove the K3 nuts - froze it once and several times it would show
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
I live in a high noise environment for 40 and 80m and find I can never get a
useful result with the noise reduction on the K3, subsequently I never use
it. I find that my other rigs finish up far more comfortable to listen to on
these frequencies where noise is prevalent. In an otherwise excellent
It might RF feedback. For me it was especially apparent when running the Olivia
digital mode. I could hear a
faint warbling sound accompanying the correct tones, sort of like an echo but
not exactly. It was also there
on other modes but less obvious. It disappeared when I used my dummy load. I
While the narrowest XFIL is *very* good, I need sometimes to use the APF to
hear small signals.
There is a discrepancy between their center frequencies. It could be
considered as small, but it becomes annoying with XFIL on BW 0.05 :
sometimes I have to shift the APF freq. regarding to XFIL*0.53 to
the signalingk usb and ham radio deluxe seem to be installed correctly, BUT i
can't see any psk31 waterfall data in ham radio deluxe.
any help would be appreciated.
i am running windows xp.
thanks
buddy spiegel,w3bs
__
Elecraft
While the narrowest XFIL is very good, I need sometimes to use the APF to
listen to small signals.
There is a discrepancy between their center frequencies. It could be
considered as small, but it becomes annoying with XFIL on BW 0.05 :
sometimes I have to shift the APF freq. to get the best
_I have a pretty high line noise problem here on six meters and the NR doesn't
make much of a dent in it. However when I tried the noise blanker it worked
great -- 10_12 DB of noise reduction as shown by wsjt. Try it. Start with the
IF blanker first and then add in some dsp.
Also, make sure
http://www.hrdsoftwarellc.com/services/default.html
On 9/5/2013 6:31 PM, b m spiegel wrote:
the signalingk usb and ham radio deluxe seem to be installed correctly, BUT i
can't see any psk31 waterfall data in ham radio deluxe.
any help would be appreciated.
i am running windows xp.
thanks
I tried different coax cables. I tried bypassing the wattmeter. I
tried just going directly to the antenna - any of the antennas and had
the same result. I tried different QSK delays and turned VOX off.
Nothing seemed to alleviate the issue.
I cannot tell for certain, but I do *not* think
So, today I received the latest CQ Magazine in the mail and see this
interesting article about a movie with Harrison Ford and other notable actors.
Apparently, ham radio plays a part, thus the article. The author was asked if
he had any high-end radios that could play a part in a movie.
Actually you ought to start with the DSP first. IF NB is a last resort
because it can generate trash when a strong signal shows up outside the
passband.
73 de Brian/K3KO
On 9/5/2013 23:39, Cady, Fred wrote:
_I have a pretty high line noise problem here on six meters and the NR doesn't
make
My KAT500 is running the latest firmware, 1.32, which I loaded a few
weeks ago. For the past year or so of operation it has worked
flawlessly. Now, not sure why, I am encountering various anomalies.
Using the tuner utility (v 1.13.5.12):
- I cannot manually adjust the tuning (for better or
On 9/5/2013 7:25 PM, Phil Hystad wrote:
So, the K3 was upstaged by a Yaesu because of knobs and lights (and,
probably physical size).
Ah yes, Tokyo At Night, name given to the stereo sets on the market
shortly after I came home from SE Asia.
But, reading the rest of the article we
find
It's always the boat anchors. The movie about the ham kid who found his
dead dad on the air was Heathkit I think. I guess they look more like
real radios to non-hams.
That movie was Frequency starring Dennis Quaid. (Hope I spelled his name
correctly). I beleive an SB-301 was used as
Buddy,
Do you have the correct sound card chosen in DM780? By default, it chooses
the default system audio device. You need to launch DM780 and tell it to
use the USB Audio Codec device (how Windows sees the SignaLink USB) for
both receive and transmit audio. The setting can be found in DM780
From what I read, it was released August 16th (I think I got the date right)
and quickly bombed in the box office. It might have been yanked from screens
by now. Here let me check --- checking --- Nope, it is not playing at the
near-by 12 screen cineplex theater. By the way, the movie is
My favorite was the Sky King episode where the short wave set was a National
receiver with a microphone plugged into the phone jack.
David K0LUM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Joel Black w4...@charter.net wrote:
I'm not sure if I'm hearing a spurious emission or not. As an example
(and I know this may sound weird to some folks - that's just the way I
am ;) ):
The following paragraph is *not* the problem - it's what the problem
sounds like to me.
If I'm on a
There is no justification to say my software is so poorly written. That us very
unprofessional
Thanks joe
Sent from my iPhone
On 2013-09-04, at 3:35 PM, Joe Subich, W4TV li...@subich.com wrote:
On 9/4/2013 3:10 PM, Karl-Heinz - DL2FAG wrote:
I have just test it with virtual
30 matches
Mail list logo