__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Hi Udo,
the mW calibration never worked on my K3 if using the K3 Utility. Don't
ask me why! Was the case right from the beginning. But it works
trouble-free when doing it the manual way from the radio front panel.
Try that as an alternative!
It seems to me settling power in the calibration
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
I used the EMU0202 with Win7 machines here, using the beta driver for
Win7. There's a download link to this driver on the Telepostinc EMU0202
page:
http://www.telepostinc.com/emu0202.html
Might be worth a try. I use it successfully on a Win8.1 laptop also.
Bob NW8L
On Sat, 20 Jun 2015,
Good afternoon all:
I have a new in the box LP Pan adaptor for sale. It's built for K2.
I built it but it's never been hooked up. LED comes on when poweredup and it
has all the correct voltages in the right spots.
When I built this adaptor, the EMU0202 sound card was the
So where does one find the KXV3B info/pricing etc. on the Elecraft web site?
I have looked by no luck so far. 73, Mike
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Joe
Subich, W4TV
Sent: Friday, June 19, 2015 4:43 PM
To:
Not a lot of info..
http://www.elecraft.com/elecraft_prod_list.htm#k3
73, Mike NF4L
On Jun 20, 2015, at 9:11 AM, Mike Sanders k...@centurytel.net wrote:
So where does one find the KXV3B info/pricing etc. on the Elecraft web site?
I have looked by no luck so far. 73, Mike
Look further down the list:
More K3 and K3S Items
KXV3B RX Ant., 2nd Pre-Amp, IF Out and Xverter Interface for earlier K3
radios. 199.95
Note: All K3S Transceivers now include the KXV3B.
73, Ray /SM5XLP
-Ursprungligt meddelande-
Från: Elecraft
Greetings,
I received my foot switch and headset from the mail man a little bit ago
and have built the cables and hooked it all to the KX3 and it all works
like it should. Now I am working on writing a macro to switch between the
MH3 and the headset/foot switch combo. I have written two macros
A few days ago I installed the new KSYN3A modules in my K3 along with
the KXV3B modules. I am running FW Rev 5.26. I was at 50.267 running
JT65 with no problems and the BW was at 2.8 KHz - the low cut at 0.1 and
the high at 2.9. When I adjusted the low end up to 0.3 a 'birdie' all
of a
I may have a dumb question here, but I'll ask it anyway.
I'm playing with HFlink which does ALE scanning on a variety of bands. As
you might imagine, on some rigs, this is a fairly noisy prospect with
relays snapping to select different filters.
I noticed that I'm also getting relay noise from
That was the missing piece! I figured it was something simple.
Thank you!
72,
Joshua Gould
K8WXA
EM89pn
KX3# 7480
NAQCC # 7704
OMISS # 9948
4SQRP # 990
FP # 3579
This message was sent from an iPhone. Please excuse any typos and the brevity
of responses
On Jun 20, 2015, at 15:29, Brian
Hi Joshua
You have to assign the alternate macro to the pf1 key at the end of the
first macro.
Add to the end of Macro 1: MN110;SWT27;SWH18;MN255;
Add to the end of Macro 2: MN110;SWT19;SWH18;MN255;
MN is to get into the menus. 110 is for the Macro settings. Swt is to tap
the 2 key (27) (or
Hi Mike,
Virtually all high-level signal sources (like the synth in a superhet receiver)
have a few birdies, and it's possible you've found one. Typically they are of
the fast-tuning variety, indicating they're related to a high-order harmonic
of the VFO frequency.
We painstakingly swept all
Udo,
I just tested a KXV3B fresh off the production line. Results: 1.0 mW TX GAIN
cal completed without error, and the XVTR IN jack is within half a dB of both
the RX ANT IN jack and the main antenna jacks (ANT1/ANT2).
I suspect that your KXV3B was damaged in transit, etc., but we won't know
Hi,
Looking toward Field Day... Is there a way to use the KX3 so that
the transmit frequency is locked, and the receive frequency can be
adjusted by the larger knob? I know I can lock the frequency and use
RIT, but then I have to tune with the smaller knob. Also, should it
accidentally
The weekly Elecraft SSB Net takes place Sunday, June 21, at 1800 UTC on
14.3035 +/-. Net control will be Ian, KM4IK, located in Roswell, GA (Metro
Atlanta area). See everyone on the net.
Happy Father's Day to all the dads out there!
73 de,
--Ian
Ian Kahn, KM4IK
Roswell, GA EM74ua
Has anyone notice any issues with the Spot button on the K3. I am running the
newest firmware and just received my radio back from Elecraft. When I am on
CW and I hear a signal close by I push the spot button and spot shows up on
the B area, but the radio does not change frequencies. It just sits
I just got my radio back from Elecraft. They changed a diode and put the new
sync board in it. It was shipped back and tonight was the first time I had a
chance to get on the air. I meet every weekend with a few guys on 80 meters.
One of the guys has a flex radio that he watches everyones audio. I
19 matches
Mail list logo