If you are using pool servers, best practice is to specify at least four
(that's the reason for having 1., 2., etc., so that you can select four
different ones). That way, if one of the them goes rogue it will be
exlcuded from the time solution but you will still have enough for a
correct
Hello Group,
I have an earlier version of K3 though I keep updating its hardware + firmware
to the latest standard.
Now it develops some problem with the front panel phone socket. Even after I
pull out my headphone jacket, no sound is coming out from the internal
loudspeaker. On the other
I also use tick.nobs.navy.mil for several years (2003) with my xp32
machine using D4 (mainly for JT65 on eme).
I have a frequent sync rate so time is rarely off more than 0.020s.
Dimension-4 is freeware and easy to setup.
I tried some other NIST programs in the past returned to using
D4. Its
Cathy
With several observed voltages being an order of magnitude wrong, I would
suspect the meter - or, dare I suggest, the user !
John G4ZTR
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
Catherine James
Sent: 27 June 2015 19:11
To:
So the above board is installed, as has the 5.29 firmware.
Could someone point me to the 'new' instructions and magic button-pushing
sequence for enabling the new preamp(s).
Sadly, in my haste to get packed, I did not bring my handwritten notes with
me from home L.
Thank you all.
Dick,
All, hopefully someone can tell me what I'm seeing is expected behavior, as
I've only had my KXPA100 attached to a end fed antenna at my house since I
got it and it's work great.
Yesterday I took the KXPA100 and KX3 out for field day. We used two
antennas, a Alpha Antenna vertical and a GR8V
Hello.
I'm presently out of the country on a 6m dxpedition and am in the process of
finishing the install of the new KXV3B.
This was my 2nd install of the new board and it went very smoothly.
My question is: I hadn't been 'inside' this xcvr for quite a while and had
forgotten it used to
Hi Johnny,
Is it possible that the plug for the speaker has been dislodged and
not seating properly or, that the wire at the speaker terminal is now
separated?
73,
Gary
KA1J
Hello Group,
I have an earlier version of K3 though I keep updating its hardware +
firmware to the latest
I'm glad that you got your answer, Dick! Please help the rest of us
wondering about the answer by posting what is was.
73,
Scott, N9AA
On 6/28/15 10:43 AM, d...@dkhanson.com wrote:
Thank you to all.
Question answered and all is well on that front.
73
Dick, K5AND
I use D4 as well.
It synch's on boot and every 15 minutes thereafter.
The longer you leave the computer on the more accurate the system clock.
I just checked and the last synch adjusted the system clock by .006
seconds. The computer rebooted three days ago.
That's plenty good enough for me.
Thank you to all.
Question answered and all is well on that front.
73
Dick, K5AND
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Thanks for all the help.
All is well and on line.
73
Dick
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
With 4 radios and a computer at the operating position, you can only have
so many speakers before
it gets out of control...
I have an audio mixer that lets me control the inputs and the feed a single
amplified set of studio monitors.
I'd like to connect the K3 thru the mixerline out to mixer
I wanted to make a add on this series of Power Supplies. Today I found a PS
birdy. Rough sounding every 26 or so KHz down -115 dBm. about 6 dB out of the
noise on 80 meters. It moves slightly on turn on.
Just happened to have the P3 on it when I turned it on.
Mel, K6KBE
From: Mel
Steve,
While either the rear phone jack or the speaker jack should work OK, I
would use the phones jack.
73,
Don W3FPR
On 6/28/2015 9:29 AM, evetsmd wrote:
With 4 radios and a computer at the operating position, you can only have
so many speakers before
it gets out of control...
I have an
Hi
K3 sn 709 just installed:
2 x KSYN3A
1 x KXVV3B
audio mod (little board with 2 caps and 2 power resistors)
replaced 6 tin pins on PA and main board KPA3 power connectors
replaced power fans with 2 x Noctua's
did mods on KBPF3 x 2
Result - radio still works :-) BUT no signals on the sub
Gary,
Is there any chance that perhaps your firewall might be blocking the traffic on
that NTP port?
This thought was triggered by the fact that all your computers were having
problems. From what I’ve found on Google doing a quick search that NTP can use
port 123 (IMCP, which is also used
Yes.
wunder
K6WRU
CM87wj
http://observer.wunderwood.org/ (my blog)
On Jun 27, 2015, at 6:22 PM, WA8JXM wa8...@gmail.com wrote:
So you are saying that NTP should still synchronize my computer clock
accurately?
On 27/06/2015 20:06, Walter Underwood wrote:
This is exactly what NTP was
For Sale - 2 new unassembled Softrock Lite II receiver kits for K3 IF
application according to the paper found with them. They're from the estate
of a local SK. I've seen Softrocks mentioned here before and therefore
thought someone in this group may be interested in these kits. Bags contain
the
When you refer to the KX3 Tuner are you talking about the one in the amp
or the rig?
If the tuner is in the rig all your tuning, inless in standby on the
amp, is the input circuitry of the amp and you will get a good SWR
everytime. If the amp is in the PA then check the connectors on the
I have a KFL3B-FM 13 kHz FM filter that I would like to sell for $105
shipped or trade for a 200HZ or 400HZ filter.
Dave N1IX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Johnny,
I suspect some oxidation has formed on the contact areas inside the
phone jack which are intended to connect/disconnect the speaker.
So yes, I would believe that changing the front panel phone jack will
fix it.
73,
Don W3FPR
On 6/28/2015 6:45 AM, Johnny Siu wrote:
Hello Group,
I
I don't recall anyone mentioning it but I've had very good luck using Meinberg
NTP on everything from XP to Windows 8.1.
73
Don AC2EV
On Jun 28, 2015, at 18:00, elecraft-requ...@mailman.qth.net wrote:
Re: [Elecraft] OT setting your computer to NIST
Hi
Working on my K2 with a long wire antenna and externalATU and my K2 shut down.
Only working at 5 watts and an SWR of 2.1:1.
I didn’t smell anything initially so I powered it backup. At first I couldn’t
hear anything on any band and slowly the sound cameback, which was a bit
strange.
John,
Check the SUB-IN and SUB-OUT connectors on the KRX3 to be sure they are
properly inserted and seated.
Also re-check the cables for the SubRX synthesizer.
Do you have the KBPF3 installed? That is required for receiving the low
band. And you should upgrade the KBPF3(s) with the newly
Kyle,
I suspect you do not have a real problem.
It is much better to set the KXAT100 to MAN after having 'trained' the
tuner in AUTO by tuning into each band segment (and band) that will be
used with a particular antenna.
In MAN the KXAT100 does not automatically attempt to retune based of
Make sure you are running the latest firmware. I observed similar symptoms some
time back, and the root cause was resolved in a firmware update.
73, Matt VK2RQ
On Sun, Jun 28, 2015 at 3:16 PM -0700, Don Wilhelm w3...@embarqmail.com
wrote:
Kyle,
I suspect you do not have a real
Hi,
I'm looking for some ideas on why my K3 has an intermittent power output
problem only on the lower bands,
10,15,20M all work fine and never have a problem. But 40,80 and 160M has no
output power.
I'm keying with both CW and with the Tune button into a dummy load with no
other
If I type:
WM,{RY#;
and then type
W;
It should send RY (as RTTY) over and over until interrupted, right? (The
# indicates repeat.)
Mine isn't. It sends it once and stops. I also tried CW, same result. I
even tried typing the examples in the manual exactly as shown. No luck.
Macbook Pro, OSX
Hello Don and others,
Thanks for your reply as well as others replied to me off-the-list.
Since there will be a new DSP board later this year, perhaps,I would simply
wait for the new one to replace the entire board.
73
Johnny VR2XMC
寄件人︰ Don Wilhelm w3...@embarqmail.com
收件人︰ Johnny Siu
Thanks to all who responded to my ad for the Softrocks. They are spoken for.
73,
Gary
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Gary
Sent: Sunday, June 28, 2015 12:02 PM
To: elecraft@mailman.qth.net; elecraft...@yahoogroups.com
Subject:
Mick,
You cannot properly troubleshoot a problem like that with too many
variables involved. In your case, you have the base K2, the KPA100
(even when bypassed), your antenna tuner, and your antenna involved -
the problem could be with any one of them.
The solution is to reduce that number
FWIW, the one glitch I encountered when I joined the Win10 beta was that the
user account I created for the Meinberg NTP service did not get transferred
over from my Win81 install.
Hopefully this will be cleared up before Win10 goes live.
--
Michael Adams | m...@n1en.org
Original
RE; KX-3 filter blow-by?
I operated about 11hrs in the ARRL FD, all CW on 20 and 40m, at 5w, a
ground-mtd vertical, and a 20m dipole at 25 ft. Mine is a unit without roofing
filters., just back from great repairs and totally successful burn-in at
Elecraft. I kept the bandwidth as narrow as it
34 matches
Mail list logo
