Don, and all:
I don't think diversity will work with different VFO's. Both Rx need
to be in phase from one LO for diversity reception to work.
I run diversity Rx on 2m with RF channels that are orthogonally
different polarity and that feeds dual IQ baseband thru a four port
soundcard to my
Removing the entire left side panel makes installation of the KXV3B
module even easier.
As an additional hint, bend the pins of the KXV3B connector slightly
toward the front - about 1/16 inch at the tips of the pins is enough.
That will allow you to more easily install the new option.
73,
What I do is switch antenna connections. My secondary antenna is
connected to both the RX ANT and the sub's BNC input. So I can listen to
the main + secondary antennas in diversity mode, just the main antenna
with diversity off, or just the secondary antenna (regardless of whether
diversity
I'm working on something that is a little more 21st century-ish... something
that is auto switching basis a little programming... about $20 worth of
stuff and it's god to go.
Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ
Owner - Operator
Big Signal Ranch - K9ZC
It's possible you may have environmental issues going on (google
'chinese drywall'). Check wiring of light switches outlets, and copper
tubing in plumbing and a/c units for corrosion.
73,
Drew
AF2Z
On 08/02/15 01:06, Wes (N7WS) wrote:
If you want to see intermittent connections...
SOLD
On 8/1/2015 5:00 PM, Ken K3IU wrote:
Looks like I may have had too high expectations regarding
the asking price.
Price now reduced to $75 delivered via USPS .
73,
Ken K3IU
Portsmouth RI
Kenk3iu at cox.net
~~~
On 7/30/2015 5:26 AM, Ken K3IU
To me it looks like the normal oxidation process that occurs due to
reaction between silver plating on the connector and oxygen in the air.
The dark color is silver oxide. {Some of you chemists can better
explain this effect.}
73 Bob, K4TAX
On 8/2/2015 12:06 AM, Wes (N7WS) wrote:
If you
See: http://k6mhe.com/n7ws/Plating.pdf
On 8/2/2015 4:36 AM, Don Wilhelm wrote:
That looks like silver oxide to me. It is conductive, so should not pose a
problem.
__
Elecraft mailing list
Home:
No, that's the old K3. The factory-built K3S is a different story. It seems as
if Elecraft drop ships all of my stuff to Joe Btfsplk and then he delivers it to
me:-(
Tell you about it at the next SADXA meeting.
Wes N7WS
On 8/1/2015 10:45 PM, Richard W. Solomon wrote:
What do they make
Yeah well... the reason I found it was because I was looking for an intermittent
problem.
I found it.
On 8/2/2015 4:36 AM, Don Wilhelm wrote:
That looks like silver oxide to me. It is conductive, so should not pose a
problem.
On 8/2/2015 1:06 AM, Wes (N7WS) wrote:
If you want to see
That looks like silver oxide to me. It is conductive, so should not
pose a problem.
On 8/2/2015 1:06 AM, Wes (N7WS) wrote:
If you want to see intermittent connections...
https://groups.yahoo.com/neo/groups/Elecraft_K3/photos/photostream/lightbox/692485818#zax/2040317344
Note: The
Hi all,
I might be one of few people who use the Linked VFO's in diversity, not
that I want to, but because I have to.
When listening to diversity I am stuck with the L-MIX-R setting to A-b.
Some times I want to switch from A-b to A-A or b-b and back again.
It is used when I need to
I have a KDSP2 module for the K2 from an Estate .
Did not build it and have not tested it.it looks completed, needs coin
battery.
Kit is $259.95, I will ship it to continental U.S. for $ 179.00 and will
need more shipping cost for DX.
--
73 Joe KK5NA
Well, you might have mentioned those little details to begin with, right?
From the original photo, which perhaps was over-sharpened, all of the
metal parts look like they are in some state of corrosion.
73,
Drew
AF2Z
On 08/02/15 09:56, Wes (N7WS) wrote:
I know you guys who responded are
Bob, I wouldn't be too quick to call it silver oxide. Silver chloride and
silver sulfide are more common than silver oxide and all are black and
conductive. One way to tell is silver oxide is removed with heat so a blast
with the heat gun (300C) will make it disappear. (See
Good Morning,
Please join us this afternoon and evening.
14050 kHz at 2200z Sunday (3 PM PDT Sunday)
7045 kHz at 0100z Monday (6 PM PDT Sunday)
73,
Kevin. KD5ONS
-
__
Elecraft mailing list
Home:
On Sat,8/1/2015 10:41 AM, Jerry Moore wrote:
First purchase:
K3S/100-K 100w Tranceiver Kit
P3-K Panadapter.
KFL3A-2.8K 8 pole filter
KFl3A-400 400 Hz 8 pole filter
That's a REAL good start. Depending on your antennas, you may need a
tuner. If so, I would do that before the P3. If your
Arie,
When in diversity, normally both the SubRX and the Main RX are
controlled by VFO A.
You must be in SPLIT to do what you are doing. Is that true?
73,
Don W3FPR
On 8/2/2015 10:34 AM, Arie Kleingeld PA3A wrote:
Hi all,
I might be one of few people who use the Linked VFO's in diversity,
Fire up the KXPA100 Utility and check the Antenna configuration page. In that
page you can choose to allocate different bands to different antenna ports.
For those with no antennas on ANT2, say, it is a good strategy to inactivate
all bands for ANT2 to avoid selecting that accidently and
Hey Howard; I second your comments. I too worked the NAQP contest for a
bit. I found the P3 really helpful for finding contacts quickly. I also
used the APF, audio peaking filter, in my K3 which often pulled in and
kept out adjacent signals really well. At the same time, I had my
vertical
Trying to do the 40 m alignment and when I hit the Tune button the display
shows P 0.4 through P 0.6 ad using the Alignment tool I go to adjust L1 and
L2 to maximum as per instructions and the display does not change. I can't
figure it out.
--
'73
Aaron Scott
K5ATG http://k5atg.blogspot.com/
Greetings,
So I'm looking for suggestions. I currently have a KX3. I also want a base rig
that is always ready to be used at home.
I currently have resonant antennas on 20/40 (my main 2 bands of operation)
I was thinking about buying a K3S and adding the antenna tuner and 100W amp as
I second Jim's recommendation of a built-in
antenna tuner as a high priority.
Even if your current antennas are resonant on all
bands, there are portable ops and other situations
where you might want to try another antenna.
The internal tuner of the K3/K3S is very capable
and well
AND - with the tuner you get a second SO239 antenna port - from front
K3/K3S
panel switch.
May sound trivial - but eliminates one more accessory hanging on the K3 .
AND great place to connect a dummy load for quick checks.
K7HP
-
From: Phil Wheeler
Sent: Sunday, August 02, 2015 10:49
I'd like to use VOX on digital modes, but never on phone and I see no
way to set it up by mode such that the gain can be set to a certain
value on phone (000), but higher on digital modes. Am I correct? Yes,
I know I can turn it on and off manually.
Arie,
Haven't drawn this out, but couldn't you accomplish your headphone audio
routing requirement via a simple outboard switch or pair of switches
mounted in a small box?
73, Dale
WA8SRA
Hi all,
I might be one of few people who use the Linked VFO's in diversity, not
that I want to, but
Cannot get the KX3 ANT select button to change antenna ports on the KXPA100.
The KX3 display acknowledges ANT button push by displaying the inactive port
but reverts to normal when display goes back to normal. Running latest firmware
on the KX3.
Any ideas?
Sent from my iPad
Hi all,
Yesterday's NAQP CW was not the first contest I have run, but during
that contest it occurred to me I have come to take the K3's performance
in contesting for granted. Sure Elecraft got my money, but I have spent
a lot more on things that either fell apart quickly or worked like
Aaron,
Can you peak the bandpass filter in receive? Do that first.
Right now, you do not know if the problem is with the bandpass filter
(L1 and L2) adjustment or whether you have another problem in transmit.
You may have to build the RF Probe (parts provided with your K2 kit) and
do the
I know you guys who responded are trying to be helpful but please
Look at another photo in the series:
https://groups.yahoo.com/neo/groups/Elecraft_K3/photos/photostream/lightbox/692485818#zax/2119748590
If all of these dire environmental things are going on in my shack, how come the
There may be another way to do what I used Link for as well; but FWIW:
Chasing DX, I often operate split (with the sub-receiver) and, when split,
I have the audio set for RX frequency in the left ear and TX frequency in
the right. However, when prowling the band I find the different audio
Sent from my Verizon Wireless 4G LTE smartphone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
Band conditions were moderate to poor today, resulting in 24 total
check-ins:
N2LRB Jose NY KX37791
N6JWJohn CA K3 976
WB9JNZ/M Eric ? ? ? (we know Eric
checked in,
Pros: what is the operating advantage of the KTCXO3-1 1 PPM reference
oscillator over the standard ‘ol bargain basement 5 PPM ref osc supplied with
my lovely new K3S?
David Ahrendts davidahren...@me.com
__
Elecraft mailing
On 10M {28 MHz} a 0.5 PPM can have +/-14 Hz error while a 5 PPM can have
a +/- 140 Hz error. It is the frequency in MHz x the PPM which is
Parts Per Million.
My article scheduled for publication in September QST discusses the
frequency read out of today's radios and their likely inaccuracy.
hello to all
I'm looking for a KPA500
thanks for your best offer
Cordiales 73
Guy F2CT
Always further outdistances
Always higher in frequency
-Message d'origine-
De : Elecraft [mailto:elecraft-boun...@mailman.qth.net] De
la part de elecraft-requ...@mailman.qth.net
Envoyé : dimanche 2
I have K2 SN 00057. It is the most basic it can be. I stopped once it was
working even though I had lots of the original add-ons because I was simply
having too much fun.
So, here is my dilemma: I have ALL of the options except the KPA100,
including updates DSP, but have not yet installed any
Phil and all,
The answer it YES. The current KRX3 will come with the new synth board,
so yes one would either have to buy a new synth board for the K3 or ask
here if anyone would like to send their old synth board to him to use
with the new KRX3. There are plenty of old synth boards around
K3S will definitely be a better base rig.
73, Phil W7OX
On 8/2/15 11:31 AM, Joshua Gould, K8WXA wrote:
Greetings,
So I'm looking for suggestions. I currently have a KX3. I also want a base rig
that is always ready to be used at home.
I currently have resonant antennas on 20/40 (my main 2
Could one of the KXPA100 antenna ports be disabled on that band?
The KXPA Utility, configuration menu, Edit Configuration lets you enable or
disable ANT1 or ANT2 by band.
73 de Dick, K6KR
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Gee
When will the new K3S book be available?
Anyone know?
Tnx in Advance
Jer/AE4PB
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
On Sun,8/2/2015 11:31 AM, Joshua Gould, K8WXA wrote:
The other thought running through my mind was to get the KXPA100 with the
tuner, and the PX3 to complete my KX Line, but I don't like having to hook and
unhook the radio to take it mobile or portable.
Am I even thinking straight?
Sure.
Re:
One question was presented to the group. Charlie, W5TTF, asked if the
sub-receiver for the K3S could be successfully used in the K3.
I imagine ONLY if the K3 has the new Synth Board.
Phil W7OX
On 8/2/15 12:57 PM, Ian - Ham wrote:
Band conditions were moderate to poor today, resulting
David,
Greater temperature stability. If you are not operating data modes like
JT65 which has long term transmit times, and your shack is at a
reasonable stable temperature, one should be as good as the other.
73,
Don W3FPR
On 8/2/2015 5:41 PM, David Ahrendts wrote:
Pros: what is the
If it bothers you if your K3S drift just a tiny bit warming up, or it
bothers you if your 10MHz WWV is not absolutely dead on all the time,
or if you are operating 6 and 2 meters, you fix that with the
KTCXO3-1, or get the stuff to sync your K3S with GPS derived 10 MHz.
From quite some number of
I agree with the tuner and plan on the external tuner because the PA 500 is in
future plans. The focus will be 40/30/20m so I have time to save up. I'm
planning to experiment with a few RX only antennas and need to make a 30m
dipole so I have a bit to do over the next month.
On August 2,
Another workaround is to learn to use VOX on phone.
I'm not coordinated enough to operate either a foot switch or mike
button and talk. VOX to the rescue.
73 de Brian/K3KO
On 8/2/2015 23:26 PM, Mike Reublin NF4L wrote:
Been chasing the same enhancement for a long time. I don't think it's
What prevents that sort of discussion around here is that the XYL has
sewing machines. :)
Jim
On Sun,8/2/2015 5:47 PM, Joshua Gould wrote:
Jim,
I was thinking the same thing. Dunno if the XYL would let me swing
that one or not though...
72,
Joshua Gould
K8WXA
EM89pn
KX3 # 7480
NAQCC #
Revised equipment purchase list:
1. Check with SWMBO/CFO (AKA XYL/significant other) to determine radio budget
limits.
2. List desired equipment in order of priority.
3. If cost of equipment on list exceeds budget limits, see # 1 above.
4. Hit Control-C to interrupt operation hung in endless
Been chasing the same enhancement for a long time. I don't think it's gonna
happen. The workaround is that fldigi and Cocoamodem can key the rig. Dunno
about Win programs.
73, Mike NF4L
On Aug 2, 2015, at 2:41 PM, Dan Atchison via Elecraft
elecraft@mailman.qth.net wrote:
I'd like to use
Ed,
That is a Field Test K2 serial number.
I recommend that you upgrade it with the K2ATOBKT and *all* the other
upgrade kits that are listed in the K2 A to B instructions. Do that
before considering adding any options.
I would also recommend that you upgrade the IF crystals to the newer
Jim,
I was thinking the same thing. Dunno if the XYL would let me swing that
one or not though...
72,
Joshua Gould
K8WXA
EM89pn
KX3 # 7480
NAQCC # 7704
OMISS # 9948
4sqrp # 990
FP # 3579
On Sun, Aug 2, 2015 at 3:19 PM, Jim Brown j...@audiosystemsgroup.com wrote:
On Sun,8/2/2015 11:31 AM,
My XYL gets sparkly things that equal the value of my radios... I've
already purchased enough sparkly to cover a K3S in it's most basic
configuration... That would give me a base rig that is on par with my KX3
and then I could try my hand at some SO2R QRP contesting... Wouldn't need
the sub
Whoops! Thanks to Fred Caty as well! Quick response too! FB OM!
Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Thanks. Be sure to let us know what you come up with.
Alan
On 08/01/2015 11:09 PM, Dr. William J. Schmidt, II wrote:
I'm working on something that is a little more 21st century-ish... something
that is auto switching basis a little programming... about $20 worth of
stuff and it's god to go.
Ed,
To further address your original question --
If you add the KPA100 to the base K2, then those options that are
mounted in the K2 top cover are not compatible with the KPA100. That is
the KAT2, KIO2 and the KBT2.
If you wish to configure it as a complete K2/10 with a KPA100, consider
As others have noted, removing the two screws on the rear of the left panel
makes the installation easier. Especially in order to attach the lock
washer and nut on the bottom corner of the KXV3B module with my XXL
fingers..
Now just waiting for the PTXMON parts that are due to arrive tomorrow so
You guys are good. Thanks to K6KR for pointing me to the KXPA utility configure
file to enable antenna port 2.
Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
58 matches
Mail list logo