Thanks to all. The Elecraft community is the best.
NR4C had the secret answer. VFO LINK in the Config menu was "ON."
Toggling it OFF unlinked the A/B VFO. As Bill points out, previous FW
revisions could lock/unlock the two VFOs by holding the SUB button.
That's been removed in the current FW.
Carl,
Time to quiz Elecraft support on that. I have very little experience
with the internal transverters.
73,
Don W3FPR
On 9/23/2015 4:55 PM, Carl Jón Denbow wrote:
Well, Don, I finally got both modules installed. Boy do I hate
working with TMP connectors in close quarters, especially
Anyone heard of a release date for those wishing to upgrade their k3 to have
the USB option?
An email to Elecraft direct went unanswered.
Gary
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Have you guys considered moving the company to a state with a lower cost of
living?
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Eric
Swartz - WA6HHQ, Elecraft
Sent: Wednesday, September 23, 2015 8:55 PM
To: Elecraft Reflector Reflector
Subject:
Moving Elecraft to a lower-cost location is probably not feasible due to the
disruption and cost of relocating the business and families. Additionally, the
challenge and cost of finding another location can alone be significant.
However, it is a business decision, so the costs vs benefits
I just posted a very long story about installing the 2-meter transverter
in my KX3 kit. The story is too long to post here, so if you are
interested, you can read it at:
http://www.horzepa.com/2015/09/taylor-swift-and-my-kx3.html
73,
Stan, WA1LOU
Dear OMs,
Next thing we will be asking them to move off shore with engineering
possibly separated from production.Leave the gem of Elecraft as it is.
It "ain't broke so let us not try to fix it."I do however understand the
hurt to the purse. Best to all and please take no offence.
Earlier in the year I installed two KSYN3A boards in a K3 using FW 5.01.
The installation went fine and the radio has been used extensively all
year. Yesterday, I updated the FW from 5.01 to 5.35 along with the later
DSP and FP versions. I then restored a K3 Configuration I had saved prior
to
All,
Due to my travels this weekend, and nobody offering to take the net, I'm
cancelling this Sunday's Elecraft Sideband Net. We will resume when I'm back
in town on Sunday, October 4. I apologize for the inconvenience.
Everyone have a great weekend.
73 de,
--Ian
Ian Kahn, KM4IK
Will I be able to buy the audio boards for the K3 before then? :)
On Wed, 23 Sep 2015, Eric Swartz - WA6HHQ, Elecraft wrote:
Early Alert for Elecraft list readers:
Our costs are going up as our vendors are increasing their prices to us and
our labor costs increase. Its been a continual
Kent,
No I haven't because there aren't many places with a higher standard of
living. In fact I don't know of any other area that enjoys high employment
rates in high paying positions, lower cost of living/taxes, lower crime. Why
would I want to move somewhere with higher taxes, crime, and
Jim,
I do have a clue on Ca. It's a great place to live but expensive as heck
compared to most places except maybe NYC. San Diego is one of my favorite
places to live.
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim
Brown
Sent: Thursday,
Hi Gary,
Before the end of the year, once we have an excess of these three board sets in
stock. We do not want to starve regular K3S production.
73,
Eric
elecraft.com
_..._
> On Sep 23, 2015, at 11:43 PM, Gary wrote:
>
> Anyone heard of a release date for those wishing
On Thu,9/24/2015 6:03 AM, ae...@carolinaheli.com wrote:
Have you guys considered moving the company to a state with a lower cost of
living?
If you had a clue about the quality of life in the part of California
where Elecraft is located, you wouldn't be asking that question. I live
a few
Inflation is part of life. Been to a grocery store lately? Bought a new
car lately? Sent a kid to college lately?
Elecraft is doing fine for its customers - so stop whining!
Bill W2BLC K3-Line
__
Elecraft mailing list
Home:
Actually, wage, facility and development costs are pretty comparable at our
location to other states for our business. Our HQ and manufacturing facility
(we build all our radios here in CA) is located in a lower cost agricultural
area of the state . (Watsonville and the Salinas Valley -
I have a nice XV144 transverter $305.00and a nice XV50 transverter $305.00I
will pay shipping to lower 48.
Reason for selling I am also selling K2/100 as I have a very nice K3 withall
bands and my K2/100 system just setting collecting dust. It is a nicesystem
but I have moved on the the K3
Clearly ones perception of heaven is subjective
AB7CE Leroy in MONTANA
-Original Message-
From: Jim Brown
Sent: Thursday, September 24, 2015 9:23 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Price Increase Alert for mid October
On Thu,9/24/2015 6:03 AM,
Nice to hear Eric,
My goal is to finish my K-Line without going off the books. I have the
cash, just not in the right pocket ;)
Jer
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Eric
Swartz - WA6HHQ, Elecraft
Sent: Thursday, September 24,
> If you had a clue about the quality of life...
All is great until the water is gone and the wildfires come! :-)
Mike / KK5F
(former resident of Vallejo)
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
I respectfully disagree. Inflation is caused by devaluation of our currency
and anything that increases the costs of doing business without adding value
to the good or service being offered. Free enterprise on the other hand
tends to lower costs due to increased competition in the marketplace.
Not only that, but inflation, at roughly an average rate of 2 percent per year
is the target that the Fed is trying to achieve for producing a strong economy.
phil, K7PEH
> On Sep 24, 2015, at 9:08 AM, Rose wrote:
>
> Inflation is an absolutely guaranteed byproduct
If there is interest, I could do a retro net from Montana.
By that I mean, back to what started it all.
A QRP SSB 10 watts on my K2 SN 40.
On my 160 mtr loop I will hear most of you and the 20 mtr beam is there to
help you hear me.
Since the K2 has the capability to listen on the loop
I was trying to work K3P on 80m RTTY last night (new mode for me) and was
struggling to understand the owner's manual. I don't fully understand how to
get the dual APF to display correctly and setup. At one point the K3S
appeared be decoding correctly sometimes as I would sometimes see his call
Inflation is an absolutely guaranteed byproduct of our free
enterprise system!
73!
Ken - K0PP
-
On Thu, Sep 24, 2015 at 9:59 AM, Bill wrote:
> Inflation is part of life. Been to a grocery store
Unfortunately you are right. I just don't like it ;)
Jer
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bill
Sent: Thursday, September 24, 2015 12:00 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Price Increase Alert for mid October
Tell that to the banks.
It now takes 7,200 years for my money to double with the interest they
are paying me. It used to take 12 years or less.
Dick, n0ce
On 9/24/2015 11:08 AM, Rose wrote:
Inflation is an absolutely guaranteed byproduct of our free
enterprise system!
73!
Ken - K0PP
The banks are doing what they are told to do by the Central Bank. Can you say
“financial repression”?
Ken K6MR
(Sorry Wayne/Eric for the OT)
From: Richard Fjeld
Sent: Thursday, September 24, 2015 09:22
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] OT: Price Increase Alert for mid
Agree with Jim. As many downsides as there are to living in California,
that area isn't one of them.
Looking forward to another visit to the factory next month, on the way
to Pacificon.
However, also living in the Golden State, I get the dubious privilege of
paying almost $200 in sales tax
Be glad in holland we pay 21 % tax over the price including the transport costs
:-((
Sent from my iPhone
> On 24 sep. 2015, at 21:08, Jim Lowman wrote:
>
> Agree with Jim. As many downsides as there are to living in California, that
> area isn't one of them.
>
There have been some approvals and no objections
so I will do the Sunday 1800Z net from Montana.
I will be running K2 serial number 40,
at 10 watts SSB. Use whatever power you want,
but it might be fun to try 10 watts and see if you
can get thru. All are welcome.
Leroy AB7CE
-Original
Why not just increase your order for boards from the board manufacturer?
On Thu, 24 Sep 2015 08:53:11 -0700
"Eric Swartz - WA6HHQ, Elecraft" wrote:
> Hi Gary,
>
> Before the end of the year, once we have an excess of these three board sets
> in stock. We do not want to
Hi Allan,
The short answer is that the hardware doesn't support it. The long
answer is that the video chip we are using on the SVGA accessory board
limits us to how many "video layers" we can combine to produce the video
image. Overlaying the cursors on to the waterfall would require an
What frequency?
On Thu, 2015-09-24 at 12:17 -0600, lmarion wrote:
> There have been some approvals and no objections
>
> so I will do the Sunday 1800Z net from Montana.
>
> I will be running K2 serial number 40,
>
> at 10 watts SSB. Use whatever power you want,
>
> but it might be fun to
Has there ever been a "K3S" call issued? Wink
wink.
Chas
-Original Message-
From: Elecraft
[mailto:elecraft-boun...@mailman.qth.net] On
Behalf Of ae...@carolinaheli.com
Sent: Thursday, September 24, 2015 12:35 PM
To: 'Elecraft Reflector'
Subject: [Elecraft] K3S
I think you're grossly underestimating the disruptive cost of a move
like that. The loss of product flow (or at the very least the cost of
the redundancy involved to avoid it, the massive time spent
orchestrating such a move, the undefined cost of the probable loss of
key personnel who
I have been trying to get DXLabs (WinWarbler) to transmit FSK with no luck so
far. I believe I have the settings right but so far no diddles. I hear a tone
in the speaker and the TX LED lights up and the screen show that I am
transmitting, but no power out. I am sure it is something simple
Businesses have the right to price their products as they think best and
customers have the right not to buy them. If either side makes a mistake,
they lose - pretty much a self-correcting system when it¹s left alone
(i.e. barring unnecessary government interference.) More to the immediate
I am a lover of Elecraft products, I even had the opportunity of seeing how
engineers work and visited the HQ.They all do an excellent work!!
I wish you can find a solution for this situation and things calm down.
I do understand prices could have to be revised and go up.
Elecraft is
Leroy,
I apologize I didn't respond sooner. Thank you for picking up the ball and
running with it. Have a great net!
73 de,
--Ian
Ian Kahn, KM4IK
Roswell, GA EM74ua
km4ik@gmail.com
10-10 #74624, North Georgia Chapter #2038
PODXS 070 #1962
K3# 281, P3 #688, KAT500 #860, KPA500 #1468
I realize that this is OT, but the list seems like a good place.thanks for
your indulgence!
A friend of mine is looking for a RF Engineer. I thought I would pass this
along (hope it's ok). Thanks!
Ed K6CTA
(Reply direct to Rob I'm just the messenger!)
---
Higher Ground
I nice XV50 transverter $305.00I will pay shipping to lower 48.
Reason for selling I am also selling K2/100 as I have a very nice K3 with all
bands and my K2/100 system just setting collecting dust. It is a nice system
but I have moved on the the K3 Line and to sell this equipment to pay for
I am looking for someone with more experience than me with using the K3 on
CW.
I have my K3 set to about 75 percent RF gain, and the width set to around
300.
ATT is off and Pre is off I do not have the dual filter on, and no afx on. I
can spot and decode signals if they are strong. If they are
My experience with CW decode is:
Try setting the THR to 2. Now, with the CWT enabled press the SPOT button and
the little signal marker should align with the index mark. And, the marker
should flash in step with the audio CW signal. If it stays on too much, set
THR up to 3, or vice versa,
Thank all of you both on list and off list that sent me info.
I am going to try these different settings and see which ones work for me.
I am a believer that the decoding in the head is the best, but after a long
time of not using it, I am having to relearn code all over again. It is
starting to
On Thu,9/24/2015 9:48 AM, Dan Atchison via Elecraft wrote:
I built a nice boom microphone switch to swap my Heil PR781 between my
K3S and my K3. The switchbox uses XLR connectors so I can use the
Heil K3 "proper" cables to each rig. I bought a regular XLR extension
cable for the mic to
If I understand the question I'm in data AFSK A 45wpm, connected to HRD
DM780, I can hear the RTTY on both the radio and computer, I think I have
the radio tuned correctly because the Text is about 70-80% correct, I'm
seeing callsign and report most of the time. Computer shows no data, I've
done
In a thread "Touch-screen displays" on 9/3/15 at 11:28 PM,
fra...@pwpconsult.com I wrote:
What I have noticed over the years is that the UI hardware has
gotten worse. Keyboards are the most obvious example. I am a
good touch typist. When I started to learn CW (for the third
time), I decided
I find HRD overly complicated so I don't use it, and cannot speak to how to set
it up.
I use a variant of MMTTY that is designed to interface with DXBase, my logging
program. MMTTY would be setup the same.
I use AFSK A and low tones, 915 Hz, and set up MMTTY accordingly. Make sure
whatever
Bill,
How are you doing PTT? Using FSK I believe you will have to assert PTT via
the 15 pin ACC connector? I'm using an adapter made and sold by W1AN. It
connects to the K3S ACC port and a standard COM cable to the PC.
I have RTTY FSK working successfully with Winwarbler and a K3S. If you don't
Folks - this thread was closed earlier today.
73,
Eric
Moderator
/elecraft.com/
On 9/24/2015 12:16 PM, David Gilbert wrote:
I think you're grossly underestimating the disruptive cost of a move like
that. The loss of product flow (or at the very least the cost of the
redundancy involved to
I want to know too because they will soon raise their prices.
73
Johnny VR2XMC
寄件人︰ Gary
收件人︰ Elecraft
傳送日期︰ 2015年09月24日 (週四) 2:43 PM
主題︰ [Elecraft] K3 New kio board
Anyone heard of a release date for those wishing to upgrade their k3
I suspect they will offer it when they have a quantity available over and above
those needed for K3S sales. As to the price increase, most of the increases so
far have been on the big items, mostly the radios. Little stuff doesn’t change
a whole lot.
…bc nr4c
> On Sep 24, 2015, at 7:59
The KIO3B price will not be impacted by the price adjustments.
73,
Eric
/elecraft.com/
On 9/24/2015 4:59 PM, Johnny Siu wrote:
I want to know too because they will soon raise their prices.
73
Johnny VR2XMC
寄件人︰ Gary
收件人︰ Elecraft
傳送日期︰
"We have hit the point where we will be increasing prices slightly on a number
of our products by about the middle of October."
Hm...again eh? Seems like everything is going up except wages for the American
worker. Seems they stopped going up about inauguration 1980 & that gap just
started
Tom,
There are forums where the politicization of topics is appropriate. This
isn't one of them. If you want to proselytize to your captive audience
on Facebook, go for it, but as for doing it here? I say don't.
Scott N9AA
On 9/24/15 8:43 PM, Tom Fitzgerald via Elecraft wrote:
"We have hit
And in Australia's case, the government is spend 26% of GDP per annum.
Is that the same as writing checks your body can't cash?
Sorry Eric, can't help myself
:-)
Gary
-Original Message-
From: "Kenneth Talbott"
Sent: 25/09/2015 1:39 PM
To: "'Jerry Moore'"
I built a nice boom microphone switch to swap my Heil PR781 between my
K3S and my K3. The switchbox uses XLR connectors so I can use the Heil
K3 "proper" cables to each rig. I bought a regular XLR extension cable
for the mic to swithbox.
Well, I used a DPDT switch to switch both pins 1 and
Folks - Let's not drift into personal back and forths here. Thread now closed.
Eric
Moderator
/elecraft.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Folks - This is drifting way OT and inappropriate for this list. Thread has been
closed as per my earlier post.
Eric
/elecraft.com/
On 9/24/2015 9:25 AM, Ken K6MR wrote:
The banks are doing what they are told to do by the Central Bank. Can you say
“financial repression”?
Ken K6MR
You can run whatever power/rig you want,
but you might be surprised if you try QRP.
-Original Message-
From: lmarion
Sent: Thursday, September 24, 2015 10:31 AM
To: Ian - Ham ; 'Elecraft List'
Subject: Re: [Elecraft] This Sunday's SSB Net Cancelled
If there is interest, I could do a
I agree with Bill's suggestions. I do find the value of THR is somewhat
dependent on RF Gain. Thus more atmospheric noise / static bursts the
higher value for THR. In this case reducing RF Gain helps. This
evening the RF Gain, hr on 80M, is setting between the 1 o'clock and 2
o'clock
Get with the program, guys! How many times does Eric have to close this thread?
From: Ken G Kopp
To:
Cc: "elecraft@mailman.qth.net"
Sent: Thursday, September 24, 2015 6:41 PM
Subject: [Elecraft] Another Elecraft price increase...
I''ll
I am a lover of Elecraft products, I even had the opportunity of seeing how
engineers work and visited the HQ.They all do an excellent work!!
I wish you can find a solution for this situation and things calm down.
I do understand prices could have to be revised and go up.
Elecraft is
Is this really a Elecraft topic?
Mel, K6KBE
From: Mike Morrow
To: elecraft@mailman.qth.net
Sent: Thursday, September 24, 2015 9:13 AM
Subject: Re: [Elecraft] Price Increase Alert for mid October
> If you had a clue about the quality of life...
All is great
I think I got it working. I changed the K3S Settings to 915 - 170 and
HRD/DM780 started decoding correctly. I was able to work N3P successfully
..TYTYTYTY...
What threw me off was that the K3S was decoding correctly anytime I had the
tuning close but I wasn't getting anything (not even garbage)
Paul
Would it be possible to turn off the the spectrum display and its cursor
and add the cursor to the waterfall display?
Allan
AB8OU
*Allan Zadiraka*
On Thu, Sep 24, 2015 at 2:11 PM, Paul Saffren wrote:
> Hi Allan,
>
> The short answer is that the hardware doesn't
I think your question is really related to the CW decode function rather
than using the K3 on CW.
I am probably 90% CW, ~3% SSB [Sweepstakes, NAQP's, and RAC's], and the
rest RTTY. This is probably going to touch off a storm on the list, but
here goes:
I run the RF gain full clockwise,
Eric & Wayne,
Might be an idea to see how many K3 owners will be wanting to install
KIO3B's and pre-order a suitable qty from your supplier. I'm sure there
will be a run on these board just like the new VCO. I'm also sure that
many on this list would simply pre-pay the full amount or a deposit
Ditto.
On 9/24/2015 8:02 PM, Scott Manthe wrote:
Tom,
There are forums where the politicization of topics is appropriate.
This isn't one of them. If you want to proselytize to your captive
audience on Facebook, go for it, but as for doing it here? I say don't.
Scott N9AA
--
R. Kevin
Yes, I agree as well... Please stick to things radio...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
Devaluation aka quantitative easing aka monetizing the debt - we are so
screwed
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jerry
Moore
Sent: Thursday, September 24, 2015 12:17 PM
To: 'Rose'
Cc: 'Elecraft Reflector'
Subject: Re: [Elecraft] OT:
Jer,
Which DATA sub-mode were you in? For RTTY, you would normally be in
AFSK A and then you could activate the dual tone filter. I believe most
use MMTTY for RTTY, but HRD/DM780, Fldigi and other waterfall oriented
software can work as well.
In AFSK A (or FSK D) the K3 is in LSB (normal
Not to worry, Johnny: There's not yet a price to
raise :-)
73, Phil W7OX
On 9/24/15 4:59 PM, Johnny Siu wrote:
I want to know too because they will soon raise their prices.
73
Johnny VR2XMC
寄件人︰ Gary
收件人︰ Elecraft
傳送日期︰ 2015年09月24日
I found an article by Tony McClenny, N3ME that stated in part:
"CW Operation:
Wayne (N6KR) provides the following for anyone using the K3 to decode CW.
"If you're seeing E's and T's, try using a much narrower bandwidth, 50-150
Hz, and turn on the noise blanker to reduce the level of impulse
I''ll second that with another DITTO !
K0PP
On Thu, Sep 24, 2015 at 7:02 PM, Scott Manthe
wrote:
> Tom,
>
> There are forums where the politicization of topics is appropriate. This
> isn't one of them. If you want to proselytize to your captive audience on
>
H...South Australia might get submarines but VK1's want the KIO boards too.
ROTFL
We got some folding stuff too.
73
Gary
-Original Message-
From: "Matthew Cook"
Sent: 25/09/2015 10:50 AM
To: "Eric Swartz - WA6HHQ, Elecraft"
Cc: "Johnny
77 matches
Mail list logo