Re: [Elecraft] [KAT500] PC Data to Amp Control?

Thanks Jack and others that replied off list. I'm going to go with the y cable sniffer approach. Since I don't use the amp all the time, I'd rather not have to power it up just so the KAT500 can receive commands from the Kenwood. 73, Cliff K3ll -Original Message- From: Jack Brindle

Re: [Elecraft] KSYN3 Cheap

This strictly my personal opinion, but I did not even consider "up-grading" my K3 by purchasing the newer boards. Mainly for this very reason. What ru gonna do with the old boards? They have practically ZERO value. BUT, a good working K3, even if it doesn't have the super synth board etc.,

Re: [Elecraft] K1 Power jack size ?

Thank you Josh, and Brian, and all the rest for the fast answers. Very helpful, you guys and this list!! Have a great day, --... ...-- Dale - WC7S in Wy > Subject: Re: [Elecraft] K1 Power jack size ? > From: j...@voodoolab.com > Date: Fri, 9 Oct 2015 17:43:17 -0700 > CC:

Re: [Elecraft] KX3 BC? Feedthru

Try enabling RX SHFT. It moves the IF from 0.0 to 8.0 kHz and usually solves the problem. More detail in the manual on page 38. Jim/KK1W N4CW wrote > While operating CW during the CQP at my Maine QTH, on different bands and > at different times, I heard > "voices" coming through the KX3 where

[Elecraft] K1 Power jack size ?

E620026 is the part number for the hole-through PCB mounted power plug for the K1. What is the outside size of that jack? the inside is 2.1mm. I am planning to build a test jig for the K1 for the lab. Thankyou, Have a great day, --... ...-- Dale - WC7S in Wy

Re: [Elecraft] Prolific driver windows 10

Any other USB cable to RS-232 that Works with Windows 10? Alfredo Velez WP3C/NP4DX e-mail: mailto:w...@aol.com Web: http://www.wp3c.comule.com/ -Original Message- From: Alfredo Velez WP3C via Elecraft To: elecraft Sent: Wed, Aug 5,

Re: [Elecraft] K1 Power jack size ?

Outside of the jack (hole) size is 6.50 +/- 0.04 mm diameter measured. Hole has a little springy contact that will accommodate a smaller plug. OD contact size of the plug is 5.50 +/- 0.02 mm measured. Yeah, it's really confusing. Brian, K0DTJ On 10/9/2015 12:47, Dale Putnam wrote: the

Re: [Elecraft] Prolific driver windows 10

Anything with an FTDI chip set. On 10/9/2015 6:54 PM, Alfredo Velez WP3C wrote: Any other USB cable to RS-232 that Works with Windows 10? Alfredo Velez WP3C/NP4DX e-mail: mailto:w...@aol.com Web: http://www.wp3c.comule.com/ -- R. Kevin Stover AC0H ARRL FISTS #11993 SKCC #215 NAQCC #3441

[Elecraft] Cw Skimmer

Is anyone using CW Skimmer with the K3? I'd like to get your thoughts. Tnx N1BBR -- bw...@fastmail.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

[Elecraft] Quick K3 question

Hi All, Got the K3s/10 assembled and trying to get used to it. One quick and easy question I'm sure you will know, that I haven't found myself. How do I disable the beeps when buttons are pushed? Thanks N1BBR -- bw...@fastmail.net __

Re: [Elecraft] K1 Power jack size ?

the outside contact size is what is being asked.. Mouser has a list of assortments. Thankyou. Have a great day, --... ...-- Dale - WC7S in Wy From: daleput...@hotmail.com To: elecraft@mailman.qth.net Subject: K1 Power jack size ? Date: Fri, 9 Oct 2015 13:45:04 -0600 E620026 is

[Elecraft] K3S Sub - No Signals

I have found myself again in this mode where pressing the SUB button reveals white noise but no signals. When I flick the A/B or hold the BSET buttons, they are really LOUD. But noting on SUB. I have checked that the antenna is correct (same as MAIN (ANT1), the RF GAIN and AF GAIN are up,

Re: [Elecraft] Prolific driver windows 10

The MFJ unit sold by HRO works on windows 10. Jerry Moore AE4PB, K3S - S.N. 010324 An Amatuer is - Considerate, Loyal, Progressive, Friendly, Balanced, and Patriotic. -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Alfredo Velez WP3C Sent:

Re: [Elecraft] [KAT500] PC Data to Amp Control?

Or connect the Kenwood’s serial port to the KPA500’s Radio port, then set the RADIO = SERIAL in the KPA. Follow the directions in the KPA manual. This is exactly what that serial port is designed to do. Make sure you use the RADIO port, not the PC port for this. If you connect the serial port

Re: [Elecraft] K1 Power jack size ?

Almost certainly 5.5mm. I don't have one, but 5.5x2.1 is by far the most common DC power jack. 73 Josh W6XU Sent from my mobile device > On Oct 9, 2015, at 12:45 PM, Dale Putnam wrote: > > E620026 is the part number for the hole-through PCB mounted power plug for >

Re: [Elecraft] SOLVED: K3S Sub - No Signals

Once again, this was the antenna selection. I found that PHONE was set to a different ANT than SSB on some bands. When I squint at the display it says ANT, which looks a lot like ANT1. My suggestion would be this appear more like the FILTER display with [ 1 x x ] or something more obvious.

Re: [Elecraft] Quick K3 question

Config menu SW TONE - set it to OFF. Read through the menu settings section of the manual (starting on page 55) to give you an idea about how the K3S can be configured to your preferences. 73, Don W3FPR On 10/9/2015 10:01 PM, dw wrote: Hi All, Got the K3s/10 assembled and trying to get

Re: [Elecraft] Quick K3 question

See SW TONE page 65 in the manual for details. Otherwise, go to CW mode and set MON value to 0. 73 Bob, K4TAX On 10/9/2015 9:01 PM, dw wrote: Hi All, Got the K3s/10 assembled and trying to get used to it. One quick and easy question I'm sure you will know, that I haven't found myself. How

Re: [Elecraft] Cw Skimmer

I have FiFi SDR RX ( http://www.box73.com/product/3 ) connected to K3 IF output with CW skimmer. Very nice especially in pileups when trying to find where DX is listening. Olli OH6CT > -Alkuperäinen viesti- > Lähettäjä: Elecraft [mailto:elecraft-boun...@mailman.qth.net] Puolesta dw >

Re: [Elecraft] Cw Skimmer

The only way you can use CW Skimmer directly with the K3 is in "Audio Mode", where the passband supplied to CW Skimmer is limited by whatever filter you have engaged (i.e., 2.7 KHz, etc). If you want to see a reasonable portion of spectrum you need a separate hardware interface that

[Elecraft] [KAT500] PC Data to Amp Control?

Hi, If I change bands on the KAT500 via the PC Data port, it appears that the new band data is not sent to the Amp Control connector. Is this expected behavior? (hoping no). For reference, my setup is: Kenwood TS-940 DXLabs Logging program KAT500 KPA500 The 940 is connected to

Re: [Elecraft] KSYN3 Cheap

A loving new home has been found Wally K7FEL -- View this message in context: http://elecraft.365791.n2.nabble.com/KSYN3-Cheap-tp7608848p7608853.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing

Re: [Elecraft] KX3 BC? Feedthru

Turn on RX SHIFT in the menu. This disables the roofing filters, but gets rid of baseband RF breakthrough. See page 40 of the manual. http://www.elecraft.com/manual/E740163%20KX3%20Owner's%20man%20Rev%20C5.pdf

[Elecraft] KX3 BC? Feedthru

While operating CW during the CQP at my Maine QTH, on different bands and at different times, I heard "voices" coming through the KX3 where there shouldn't be any "voices"! Unlike images, they didn't change as I tuned around. It was like i.f. signal "leakage", and I mitigated the effect by

[Elecraft] K2

I have a fairly old K2/100AT. It was in deep storage for a year. Friday I took it out of storage for CQP and ran it through some basic tests on a dummy load. I then went on the air on 20, 40, and 80 meters that evening on separate tuned dipole antennas with SWR better than 1.5. All operations

Re: [Elecraft] KSYN3 Cheap

And I have 10 each of the KSYN3 boards should anyone be capable of putting them to good use. Just contact me off list. 72 de Milt, N5IA -Original Message- From: Wally -K7FEL- Sent: Thursday, October 08, 2015 1:48 PM To: elecraft@mailman.qth.net Subject: [Elecraft] KSYN3 Cheap

Re: [Elecraft] [KAT500] PC Data to Amp Control?

The KAT500 can read, but not pull down the 4 band change lines. Dick, K6KR Sent from my iPhone > On Oct 8, 2015, at 21:07, Cliff Frescura wrote: > > Hi, > > > > If I change bands on the KAT500 via the PC Data port, it appears that the > new band data is not sent to the

Re: [Elecraft] K2

Ron, First the PA HOT message -- power off the K2 and let it rest for 30 minutes to acclimate to ambient temperature. Then power it on and enter the menu for CAL TPA. Edit the parameter and rotate the VFO knob to set the value at the ambient air temperature in degC. After that, check on

[Elecraft] KSYN3 Cheap

In the first few weeks after the new synths became available some of us tried to give our old ones away but couldn¹t find anyone with a worthy need. If a market has developed since then, maybe someone will let us know - $15 would be outstanding. Ted, KN1CBR >-- >

Re: [Elecraft] [KAT500] PC Data to Amp Control?

Thanks Dick, Looks like I could either have the KPA500 sniff the RS-232 line into the KAT500 (use RXD pin only at the KPA500), or implement BAND0-3 and make it minimally emulate a K3S into the KPA500. 73, Cliff K3LL -Original Message- From: Dick Dievendorff [mailto:d...@elecraft.com]