Re: [Elecraft] K3,P3,SPE 1.3kw amp and MicroHAM interface III

Try LPBridge, at www.telepostinc.com. It's a more-or-less virtual Y-cable. Read the docs first, though. You will probably be stuck with 9600 bps if you choose this path. 73, matt W6NIA == On 5/9/2016 9:25 PM, Jerry Muller via Elecraft wrote: Ok all you great guys. I have a K3

[Elecraft] K3,P3,SPE 1.3kw amp and MicroHAM interface III

Ok all you great guys. I have a K3 which is hooked to my P3 thru the K3 RS-232 port which is normal and then from the P-3 to the CPU for logging. I now have a MicroHAM Interface III which also wants that RS-232 port. Will a RS 232 Y cable work? That is the first question. The second

Re: [Elecraft] [K2] No RCV audio...

Eric, That is indeed strange. Go to the secondary menu and see if Squelch might be turned on. I can't think of another reason at the moment. 73, Don W3FPR On 5/9/2016 10:56 PM, Eric Thielking wrote: My K2 appears to have a receiver problem. Specifically, I don't hear any receive audio,

[Elecraft] [K2] No RCV audio...

My K2 appears to have a receiver problem. Specifically, I don't hear any receive audio, unless navigating into the menu systems, at the 'OPT' section or the 'ATU' section. When those parts of the menu are active, receive audio can be heard. When one exists the menus, the audio falls off, and

Re: [Elecraft] elecraft,RJ45 Standard

Folks - due to the large number of posts on this topic, let's end the thread at this time to give our other readers a rest. 73, Eric Moderator /elecraft.com/ On 5/9/2016 3:10 PM, Lynn W. Taylor, WB6UUT wrote: On 5/9/2016 10:03 AM, Jim Brown wrote: At audio levels, the shielding from

[Elecraft] Last call for FDIM registration

FDIM (Four Days In May) is just next week ! It is the annual convention of the QRP ARCI (QRP Amateur Radio Club International) - you do not have to be a member to attend. FDIM happens in Dayton, OH and just happens to run the same week as the Dayton Hamvention ! Online booking will close very

Re: [Elecraft] elecraft,RJ45 Standard

On 5/9/2016 10:03 AM, Jim Brown wrote: At audio levels, the shielding from twisting the wires might be helpful. It is VERY helpful. When I said *might* I was being slightly sarcastic. If a cable has an RJ-45 on each end, there is always a chance in a modern home that the cable is going to

Re: [Elecraft] elecraft,RJ45 Standard

On Mon,5/9/2016 1:21 PM, dave wrote: > You're missing the fact that although these conductors INTENTIONALLY > carry DC and low rate signals, they also can PICK UP RF and AF noise. > Twisted pair, when used to carry a signal, is at least as powerful at > rejecting RF and AF noise pickup as coax,

Re: [Elecraft] KX3 setting up digital

I use the macros in DXLabs to do just this, when I select a digital mode macro it turns off the Mic PTT button and sets my BW to 4KHz (actually I set one DXL Commander button to toggle through a few select BWs). Another Macro for SSB sets it back to the settings I want to use for SSB. Probably

Re: [Elecraft] elecraft,RJ45 Standard

> You're missing the fact that although these conductors INTENTIONALLY > carry DC and low rate signals, they also can PICK UP RF and AF noise. > Twisted pair, when used to carry a signal, is at least as powerful at > rejecting RF and AF noise pickup as coax, but ONLY if the pair is > dedicated

Re: [Elecraft] KX3 setting up digital

Agreed re: Mic button setting, that happens to me all the time. Would it be possible to have it turn it off when switching to DATA A? Also, widening the filter BW out to the full 4kHz at the same time? Perhaps there's other uses of DATA A I don't know that might make these requests invalid, so

Re: [Elecraft] KXPD1 as a sideswiper?

John, Certainly, but it is a permanent change (until changed back) and requires soldering. Leave the wire to the dot side board (the one connected to the tip of the plug - use your ohmmeter) connected, but remove the wire to the dash side (goes to the ring). Then wire the dot side and dash

[Elecraft] KXPD1 as a sideswiper?

Good Day Everyone, Is it possible to re-jigger the KXPD1 as a sideswiper (not a straight key)? Tnx es 72/73, John K4ARQ -- John Flynn Tallahassee, Florida USA __ Elecraft mailing list Home:

Re: [Elecraft] KX3 internal battery problems

Re: With increasing cycle count, individual cells are showing differences. Cycle count agravates the differences, but the most common CAUSE is a failure to FULLY CHARGE the series set of cells, so some of the cells never reach their FULLY CHARGED voltage.  Damage occurs during use as the cells

Re: [Elecraft] elecraft,RJ45 Standard

On Mon,5/9/2016 9:41 AM, Lynn W. Taylor, WB6UUT wrote: If we're talking DC levels, sure, no problem. Low rate signalling just won't matter. You're missing the fact that although these conductors INTENTIONALLY carry DC and low rate signals, they also can PICK UP RF and AF noise. Twisted

Re: [Elecraft] elecraft,RJ45 Standard

Uh, maybe not. If we're talking DC levels, sure, no problem. Low rate signalling just won't matter. At audio levels, the shielding from twisting the wires might be helpful. If we're actually using them for Ethernet, then the twisted pairs aren't wires, they're transmission lines. 100

Re: [Elecraft] elecraft,RJ45 Standard

Close. There are 4 pair. On Monday, May 9, 2016 11:42 AM, David Robertson wrote: David Robertson 9:55 AM (1 hour ago) to kenin.stover, Elecraft Kevin, Thanks for the information on the RJ45 standards. what confuses me is there are 6 pair of

[Elecraft] elecraft,RJ45 Standard

David Robertson 9:55 AM (1 hour ago) to kenin.stover, Elecraft Kevin, Thanks for the information on the RJ45 standards. what confuses me is there are 6 pair of wires in a CAT 5 cable. In the standards you list, the only difference is the placement of the Orange/Orange-White

Re: [Elecraft] FS: Elecraft K2/100

I have decided to temporarily suspend my for sale offer. I want to make sure that the radio is up to spec in everyway before I can feel confident that the new buyer is getting what he/she pays for. Tnx es 73 de K6SBA David in Santa Barbara, CA I have an extremely clean K2 (100 w version)

[Elecraft] Elecraft, Other equipment review.

I noticed many complaints about other non elecraft equipment mentioned on this forum. I feel that commenting on non Elecraft equipment here is a good way of propagate interesting information. Care must be taken to not dwell on this topic too long but a brief mention of other equipment I think

Re: [Elecraft] RJ45

Hi Dave, Your logic seems correct on the surface, however the CAT5 standard also states the number of twist per pair, and the placement of the different twists, on the ends also contribute to the minimizing of "crosstalk". If you aren't attempting to be strict to the standards, then any

[Elecraft] RJ45

Kevin, Thanks for the information on the RJ45 standards. what confuses me is there are 6 pair of wires in a CAT 5 cable. In the standards you list, the only difference is the placement of the Orange/Orange-White and Green/Green-White pair of wires. As long as you maintain the same standard or a

Re: [Elecraft] I get the digest; how can I get to all the other postings?

Hi Jerry, Try Nabble. Is this maybe what you are looking for? http://elecraft.365791.n2.nabble.com/Field-Day-tips-td7590292.html#a7590298 In this thread you were one of the posters but you can search Nabble. If you just would search K9YC you will need some extra time to read all of Jim's

Re: [Elecraft] KX3 internal battery problems

Hi Markus, thanks for interesting info. Discharge was with 100 mA. I am using a TechnoLine BC-1000 charger. It handles the 4 cells individually. Max. charging current is 1.500 mA, discharge current max 500 mA - all selectable,. Seems to work quite well. Per-Tore / LA7NO On 9 May 2016 at

Re: [Elecraft] KX3 internal battery problems

Per-Tore, With increasing cycle count, individual cells are showing differences. If you don't charge them individually, these differences are getting bigger, as reflected by the numbers you posted. You mentioned that you verified cell capacity using your charger. At what discharge current? Most