UNSUBSCRIBE
73 ES CUL DE N3KHK
Mr. John R. Klim II, N3KHK
Life member: ARRL, AMSAT LM-2187, 10-10 (68135), NCDXA, QCWA
Member: 30MDG (1874), FISTS (5015), PVRC
Springbok Chapter (1874), Chesapeake Bay
Chapter (549)
QSL:
I am unable to erase the CW Memories in my KX3. I've followed the procedure
in the Owners Manual and in Fred Cady's book.
Would appreciate any help.
Tom
KN6DR
__
Elecraft mailing list
Home:
resend to reflector because your email was blocked by spamcop - my lousy
Centurlylink email system . Ken - I have watched this thread for awhile - while
I have never had this issue - (with K3 7536) - sometimes when all else fails ,
trying an EEINT process is worth while ( I call that my
My K3's second receiver is connected directly to the BNC antenna connector
with a TMP M/F jumper cable I made, and is permanently connected to a 6M
omni antenna. It's (only) used for listening for 6M openings.
73
Ken - K0PP
__
Elecraft
At K4RC, I made 8 on 80 m PSK31 and about 21 on RTTY on 20 and 40 M. I only
worked about an hour or so at times when the Phone station was between
operators.
…bc mr4c
> On Jul 1, 2016, at 6:22 PM, Bill Frantz wrote:
>
> Out of curiosity, what digital modes did people
On Fri, 2016-07-01 at 19:59 -0400, Charlie T, K3ICH wrote:
> You DO know that anything you "delete" is actually stored in the "Re-
> Cycle
> Bin" right? It can be recovered by simply going to the Re-Cycle Bin
> and
> there it is.
>
> If you delete it from the Re-Cycle Bin, it is truly gone
Ken,
Do you have the TX EQ *and the RX EQ set to zero for all bands?
The monitor can give you a double-whammy since it feeds through both
equalizers if I recall correctly.
73,
Don W3FPR
On 7/1/2016 7:29 PM, Ken Arck wrote:
Of course I'm not using the speaker for monitoring SSB - I have tried
HiOne thing missing is software support. A key api command is missing for the
subreceiver and is unlikely to be made available.So, it's an ok mod to get an
overview of an area of the airwaves, but not accurate enough for serious
use.73 Tom va2fsq.com
Sent from my Samsung Galaxy smartphone.
Leroy,
The subRX will normally use the transmit antenna, be that ANT1 or ANT2 -
there is a 3 dB splitter inserted to feed both the main and the subRX.
Now --- *if* (and only if) you select the AUX antenna for the subRX,
then the antenna connection that you have plugged into the rear of the
There are figures on pages 43 thru 45 of the K3S owner's manual (and similar
pictures are in the K3 owner's manual)
There are two relays that route signal to the sub RX.
One of the options you have is picking the sub receiver's input from the
main rx antenna path. That's the one I use. Tap ANT
Ken, I think there's something wrong. I don't frequent SSB much but
when I do the monitor always sounds fine. I just tried my K3 #642,
fairly long in the tooth but with a fairly late FW if not the latest,
and I sound just fine to myself, for whatever that's worth. There are
so many new menu
You DO know that anything you "delete" is actually stored in the "Re-Cycle
Bin" right? It can be recovered by simply going to the Re-Cycle Bin and
there it is.
If you delete it from the Re-Cycle Bin, it is truly gone forever (unless
you're a computer forensic guru).
73, Charlie k3ICH
I have a different subreceiver question: The configuration selection is
bnc or ANTtuner ant 2. Does it require a separate antenna? I thought the
subreceiver would use a pickoff of the current antenna or a separate
antenna.
Thanks, confused Leroy AB7CE
Of course I'm not using the speaker for monitoring SSB - I have tried
the Koss 40, 45 and Heil headsets, all with the same result. I've
also been careful not to overdrive either the mic(s) nor headphones.
Unfortunately I do not have the DVR but let's face it...listening on
2 other radios
Strange problem: After the last firmware upgrade, my Speed/Mic dial will not
change the speed or mic settings. I can press the dial and switch between
the Speed & Mic options - but can't change the settings!
Any help or suggestions would be really appreciated!
73 de K8OI
-
K8OI
Howdy Gang:
Has anyone heard of the KXPD2 paddle shipping yet?
Thanks for any info.
73, Joe W2KJ
KX2 s/n 347
__
Elecraft mailing list
Home:
Received a shipping message from Elecraft. Looks like my K-pod may have
shipped. Also received a pre-ship notice about it a day or two ago verifying
address, etc.
Maybe Tuesday
73,
Jim
AB4AC
Jim Finan
Sent from my BlackBerry 10 smartphone.
Out of curiosity, what digital modes did people use to make
contacts at Field Day. Our operation got good results from PSK31
and RTTY, but did not try other modes.
73 Bill AE6JV
---
Bill Frantz| "The only thing we
Is CONFIG: TX MON set to "nor" or "FAST"? Whichever it is, try the other one.
73, Ted W4NZ
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ken Arck
Sent: Friday, July 01, 2016 5:59 PM
To: Gary; elecraft@mailman.qth.net
Subject: Re: [Elecraft]
Thanks Don.
Part of my reasoning for posting was that this feature might
increase sales of P3s. Given the relative lack of interest, I
think it remains a user mod. (But my K3 might look nice with 2
P3s on top of it. :-)
73 Bill AE6JV
On 7/1/16 at 5:28 AM, donw...@embarqmail.com (Don
Everything from a Koss 40, Koss 45, Heil BM10 and
even an old Turner 454C! And yes, I know about
the bias issue. Again, they all sound good on a
different radio (over the air) but horrible using MONITOR
Ken
At 02:50 PM 7/1/2016, Gary wrote:
I imagine you have already set tx/rx EQ, set
Bias
Ken,
Is the Monitor level too high?
Are you using speakers for the monitor audio? That will certainly cause
feedback because the mic will pick up sound from the speakers. You can
use headphones with high isolation.
I would suggest a better way to evaluate the microphone response is to
I imagine you have already set tx/rx EQ, set Bias on/off depending on the mic
insert?
What is the model MIC?
Gary
-Original Message-
From: "Ken Arck"
Sent: 2/07/2016 7:32 AM
To: "elecraft@mailman.qth.net"
Subject: [Elecraft]
Hi all
I've been trying to set up a couple different microphones with my K3s
and have noticed they all sound horrible using MONITOR but on another
radio, they sound good. Specifically, it doesn't take much level
before they sound distorted, and way too."midrangy?" whereas
listening to it
On all bands even into dummy load
Not in TEST
TX INH OFF
In TUNE main display "-" and "0 W"
Other rig works fine into same antennas/dummy load with normal SWR
indicated.
Anybody been there done that?
73 John N5CQ
Sent from my iPhone
> On Jul 1, 2016, at 2:22 PM, Ai4PF wrote:
>
> Hello Tony: Accidentally deleted your e mail response to my question, and
> just wanted to say thanks. I do not have a KX3. Is there any other way I can
> check and correct my wspr drift?
>
> Bill,
Hi Bill,
Sorry, I did not notice that your original email referred to the K3 until I
had already sent a reply. I'll be darned if I know why the database isn't
reflecting your transmissions with the K3, since drift is essentially zero
(at least with mine). I assume you're xmting on the right
Where there is adequate total volume, a simple in-line control is cheap and
effective.
http://www.mycablemart.com/store/cart.php?m=product_detail=5467=CjwKEAjwqdi7BRCL6Zmjk5-rsTwSJABmrVab5rmhfLJ2Gy7w_nq8OCVR_CCA5Adrxj4Lsgv5EYhejhoCFHrw_wcB
Just set the master rig volume high enough for the
I have built hundreds of K2's and other Elecraft kits. My prices are
reasonable and you receive a new radio with the options you want.
73
Alan
W1HYV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Hello Tony: Accidentally deleted your e mail response to my question, and
just wanted to say thanks. I do not have a KX3. Is there any other way I can
check and correct my wspr drift?
Bill, Ai4PF
--
View this message in context:
http://elecraft.365791.n2.nabble.com/kt0ny-tp7619483.html
Sent
I worked 15 stations on Field Day weekend with in an hour on my 160m antenna
on 20M. Worked just fine.
Started to use N1MM logging and attested programming F keys for CW found the
infor on line and help from K9JWV got it working through only ONE USB port. Do
not know what the KY codes are or
If the headsets don’t have volume controls, you can use a simple headphone
distribution amplifier. Pretty much the same thing is made by several
companies. I have the Behringer HA400.
http://www.bhphotovideo.com/c/product/373745-REG/Behringer_HA400_HA_400_Headphone.html
In my geography, there is a definite divide relative to spending money on radio
gear. On one hand, there are so many of us that own and use Elecraft gear, the
joke is that I’m the President of JERK (Jim’s Elecraft Radio Klub).
On the other side of the ledger, unless they get the equipment for
Bill,
Getting the IF output from the subRX is not a problem, but adding the
'new protocols' would likely be a problem.
So if you just want to monitor the band around wherever the subRX is
tuned, that part is easy, just add an IF output to the subRX. I have
done that to one customer's K3, it
Gary,
You must use the 2.8 (or 2.7)kHz filter for SSB, Data, and CW transmit.
The 13kHz filter can be used for AM and FM transmit.
73,
Don W3FPR
On 7/1/2016 1:28 AM, Gary Smith wrote:
Wondering about re-orienting the filters between my K3 & K3s. If I
put the FM filter in my K3s, can it be
Brian,tis a relative drift?
For Example: many use the K3 with Spectrum Lab audio software & soundcard
and perform very well in measurement tests in ARRL FMT
http://www.b4h.net/fmt/fmtresults201604.php
Typically turn K3 on before work on day of FMT
can get within 1 hz in FMT (not always but
36 matches
Mail list logo