Bill,
Getting the IF output from the subRX is not a problem, but adding the
'new protocols' would likely be a problem.
So if you just want to monitor the band around wherever the subRX is
tuned, that part is easy, just add an IF output to the subRX. I have
done that to one customer's K3, it is not difficult.
73,
Don W3FPR
On 7/1/2016 1:49 AM, Bill Frantz wrote:
One of our field day operators announced that while he was making QSOs
on active bands, he was going to use the sub receiver in his K3 to
scan for 10M CW activity. It occurred to me that this kind of scanning
would be a lot easier if you could attach a second P3 to the K3 sub
receiver.
It seems simple. You would need an IF out from the sub receiver, and
some new protocols on the aux bus. e.g. QSY on the sub P3 QSYs the sub
receiver. etc.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
