Thanks Don.
Part of my reasoning for posting was that this feature might
increase sales of P3s. Given the relative lack of interest, I
think it remains a user mod. (But my K3 might look nice with 2
P3s on top of it. :-)
73 Bill AE6JV
On 7/1/16 at 5:28 AM, [email protected] (Don Wilhelm) wrote:
Bill,
Getting the IF output from the subRX is not a problem, but
adding the 'new protocols' would likely be a problem.
So if you just want to monitor the band around wherever the
subRX is tuned, that part is easy, just add an IF output to the
subRX. I have done that to one customer's K3, it is not difficult.
73,
Don W3FPR
On 7/1/2016 1:49 AM, Bill Frantz wrote:
One of our field day operators announced that while he was
making QSOs on active bands, he was going to use the sub
receiver in his K3 to scan for 10M CW activity. It occurred to
me that this kind of scanning would be a lot easier if you
could attach a second P3 to the K3 sub receiver.
It seems simple. You would need an IF out from the sub
receiver, and some new protocols on the aux bus. e.g. QSY on
the sub P3 QSYs the sub receiver. etc.
-----------------------------------------------------------------------
Bill Frantz |The nice thing about standards| Periwinkle
(408)356-8506 |is there are so many to choose| 16345
Englewood Ave
www.pwpconsult.com |from. - Andrew Tanenbaum | Los Gatos,
CA 95032
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
