There are figures on pages 43 thru 45 of the K3S owner's manual (and similar pictures are in the K3 owner's manual)
There are two relays that route signal to the sub RX. One of the options you have is picking the sub receiver's input from the main rx antenna path. That's the one I use. Tap ANT while in BSET to choose main path or AUX RF source. Dick, K6KR -----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of lmarion Sent: Friday, July 1, 2016 16:45 To: [email protected] Subject: Re: [Elecraft] [K3, k3S] for the Sub Receiver I have a different subreceiver question: The configuration selection is bnc or ANTtuner ant 2. Does it require a separate antenna? I thought the subreceiver would use a pickoff of the current antenna or a separate antenna. Thanks, confused Leroy AB7CE ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
