[Elecraft] PX3 6M opposite sideband suppression

I just went through the opposite sideband suppression routine using the signal generated by the PX3. It worked just as described for 160-10 meters but I could not get any significant reduction or hardly any movement at all on the opposite sideband. I verified that I was looking at the

Re: [Elecraft] P3 with KPod

This is a capability that's not currently available. There are a few of us out here who would also like to see it happen, but given that the K-Pod communicates directly with the radio CPU it might take a good bit of software to make the radio talk back to the P3. I'm personally more hopeful

Re: [Elecraft] KX2 battery in PX3

Currently when I'm operating my KX3 portable, I have the advantages of operating from a house. I use mains power and a splitter to power both the KX3 and the PX3. It's kind of ironic that I operate pure solar at home and mains power on the road. I do find the idea of slipping a battery into

[Elecraft] P3 with KPod

I'm just getting started using macros, and would like to control the P3 via the KPod as much as possible. Can the Markers be controlled via the KPod knob. I can turn the markers on and off and qsy to one or the other, but can find no way to assign the P3 knob to the KPod knob. Am I missing

[Elecraft] KX2 AM RX Comparisons

Hi- I eagerly updated my KX2 firmware to ver 2.68 and had some fun test driving the AM RX on some of the SWBC bands. Out of curiosity, I wondered how it stacked up against my Kenwood TX590S and my EAC R-390A RX. I was impressed with how well it sounded once I beefed up the audio with some cheap

Re: [Elecraft] KX2 battery in PX3

Re "a KX2 doesn't have RX IQ out...But you knew that when you bought it, Mark -- Right?" Actually that is one of the reasons I have held off buying one for a while.  I am one of the guys whose KX3 became their home station.  When I am portable, simple is better, so for me, a KX2 may be fine as

Re: [Elecraft] Shelby Hamfest

Come see Elecraft's booth in the vendor building at Shelby! Don Wilhelm and I will be there with the same special promotion you see on the main Elecraft page. Cheers, David/KG6IRW International Distributor and Customer Support Elecraft 831-763-4211 -- View this message in context:

Re: [Elecraft] talentcell battery?

There's a really good review on the Amazon site be "bani" (3 stars) which says the manufacturer's specs are essentially impossible. Based on his write up, I'd look elsewhere. YMMV. 73, Brian, K0DTJ > On Sep 1, 2016, at 14:46, Bob Novas wrote: > > There's a TalentCell

Re: [Elecraft] KX2 battery in PX3

Re "a KX2 doesn't have RX IQ out :-( ": But you knew that when you bought it, Mark -- Right? Most of us sure did :-) Phil W7OX On 9/1/16 3:03 PM, Mark via Elecraft wrote: For those who don't know, Edouard is the author of of the Wizkers:Radio software. When I saw this, I thought it looked

Re: [Elecraft] talentcell battery?

Well, any 12V battery will power a KX3 [or KX1, KX2, K2, K3, K1, FT-817, etc]. Assuming a totally flat discharge curve, you can calculate for how long based on the TX and RX drains and the duty cycle. The TalentCell appear to be Li-ion and they have a fairly flat discharge curve until nearly

Re: [Elecraft] KX2 battery in PX3

For those who don't know, Edouard is the author of of the Wizkers:Radio software.   When I saw this, I thought it looked like a cool idea for portable use, an ideal companion to a KX2...except a KX2 doesn't have RX IQ out :-( Mark KE6BB Original message From: Edouard Lafargue

[Elecraft] talentcell battery?

There's a TalentCell Rechargeable 72W, 132WH 12V 11000mAh battery available on amazon for $65. (https://www.amazon.com/gp/product/B016BJCRUO). Does anyone have any experience with these? I'm wondering if this battery would comfortably power a KX3. Thanks, Bob - W3DK

Re: [Elecraft] KX2 battery in PX3

That’s very cool. I’m going to try running the PX3 and KX3 off a 12Ah Bioenno battery and a Powerpole distribution adapter. Maybe I’ll get rid of the internal batteries on the KX3. > On Sep 1, 2016, at 2:27 PM, Bill wrote: > > Ed, Thank you for the information. Makes we want

Re: [Elecraft] KX2 battery in PX3

Ed, Thank you for the information. Makes we want to buy the PX3, as if having the P3 wasn't enough ;- ) Bill K9YEQ Bill K9YEQ -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Edouard Lafargue With all the discussion on KX2 IQ output going

Re: [Elecraft] Recommended filters for Diversity Receive?

Hi, The crystal filter section of the Elecraft order page has links to both filter plots as well as the paper by Wayne and Eric that you describe: http://www.elecraft.com/elecraft_prod_list.htm#k3filters hth, 73, Byron N6NUL On Thu, Sep 1, 2016 at 12:27 PM, Barry LaZar

[Elecraft] KX2 battery in PX3

With all the discussion on KX2 IQ output going on, I don't want to muddle things up even further, but as Mark KE6BB was reminding me earlier, there is a nice way you can power the PX3 using a standard KX2 battery that I demonstrated a couple of weeks back:

Re: [Elecraft] Recommended filters for Diversity Receive?

At one time there was a paper on the web page written by either Wayne or Eric ( I can't remember which) that had recommendations on filter selection. You might try and find it or get the author to republish. 73, Barry K3NDM -- Original Message -- From: "Jim Brown"

Re: [Elecraft] Recommended filters for Diversity Receive?

On Thu,9/1/2016 10:19 AM, w...@comcast.net wrote: My primary usage will be SSB and CW contesting, and very occasional SSB and CW DXing. My ears find a 1.8 kHz roofing filter too narrow for SSB, preferring 2.1 kHz. The DSP IF can always be set narrower if desired. I first bought 400 Hz

[Elecraft] Opt-in/out

Hello Andrew, John, Aaron and all, No need to respond to the email if you want to subscribe. To opt-out, please click on the "unsubscribe from the list" link on the bottom of the email. Thanks, -- Madelyn Gomez Elecraft Sales 125 Westridge Drive Watsonville, Ca. 95076 831/763-4211

[Elecraft] R: Recommended filters for Diversity Receive?

I own a K3S from 9 months. I bought it with 500hz 5 poles and 200hz 6poles. On my old radio, an FT1000MP had INRAD chains, 8 poles. In my Elecraft I preferred to use 5 pole and 6 poles, wide 500hz for normal operating without the little ringings that produced tired listening. And for contests.

[Elecraft] Shelby Hamfest

Hi all, To answer the queries, Pro Audio Engineering will not have a booth at Shelby this year due to a scheduling conflict. To compensate those who were looking to pick up their purchase there, we will be offering free shipping for all orders made in the month of September to USA

Re: [Elecraft] Recommended filters for Diversity Receive?

Personally, I find the 1.8 KHz filters best for SSB contesting. Otoh, haven't used the 2.1s here. I use the 250 Hz filter for CW and some data modes. 73, matt W6NIA On 9/1/2016 10:19 AM, w...@comcast.net wrote: Hi all, I'm a new K3 owner, and haven't really even used the radio yet. It's

[Elecraft] Thank you Elecraft!

I just wanted to say thank you to Elecraft. I built / have the KX1, KX3 and K2, all fine rigs. But I relocated m K2 up at our rustic, small, cabin in the high sierras, as my "rig in residence". It had been a while since I used the old K2 as the KX3 has seen daily use in the WA6ARA shack at home.

[Elecraft] Recommended filters for Diversity Receive?

Hi all, I'm a new K3 owner, and haven't really even used the radio yet. It's at Elecraft right now getting the Synthesizer upgrade, and I need some help making a decision on filter configuration. My primary usage will be SSB and CW contesting, and very occasional SSB and CW DXing. I will

Re: [Elecraft] A Message from Elecraft

Ah, I read the following " You can opt-in at any time by sending us an email at sa...@elecraft.com." and considered that I needed to opt-in. -Aaron On Thu, Sep 1, 2016 at 9:54 AM John Pitz wrote: > They are not asking for permission to email you, they are assuming

Re: [Elecraft] A Message from Elecraft

They are not asking for permission to email you, they are assuming that permission has been granted and are asking you to opt out if that bothers you. On Thu, 2016-09-01 at 09:29 -0700, KD6QZX wrote: > Keep sending.. > > > On Thursday, September 1, 2016 9:23 AM, KD3RF [via Elecraft] >

Re: [Elecraft] A Message from Elecraft

Keep sending.. On Thursday, September 1, 2016 9:23 AM, KD3RF [via Elecraft] wrote: Here's something that's rere DX... A message from a company ASKING FOR PERMISSION TO E-MAIL ME ! I want to get Elecraft eMails and really appreciate these

Re: [Elecraft] A Message from Elecraft

Here's something that's rere DX... A message from a company ASKING FOR PERMISSION TO E-MAIL ME ! I want to get Elecraft eMails and really appreciate these guys asking. Thanks guys! - Forwarded Message - From: Elecraft To: Sent: Thursday, September 1, 2016

Re: [Elecraft] Power has disappeared *** OOPs! ***

My K3S is back and has worked properly for 10 days now. Thanks to all for the helpful comments. -- View this message in context: http://elecraft.365791.n2.nabble.com/Power-has-disappeared-tp7620735p7622065.html Sent from the Elecraft mailing list archive at Nabble.com.