[Elecraft] [K3} Setting K3 and WSJT-X levels?

I know about how to use the S-meter to set transmit audio level (4 bars). What I've yet to find anywhere is a discussion on whether to favor the sound card output or the mic gain. In other words, is it better to have a lower sound card output and a higher mic gain, or vice versa, or does it

[Elecraft] K3 filter trade?

Hello everyone, I have an extra 2.8 KHz 8-pole filter for the K3. I would like to trade it for a 400 Hz filter for CW. My 2.8 filter works perfectly. Anyone want to trade? Otherwise, I would buy a 400 Hz filter if anyone has one they would part with. Let me know your price.

[Elecraft] Happy Thanksgiving Day

Ken and I want to wish all of you a Happy Thanksgiving Day. Enjoy your family and friends. 88! Rose Kopp - N7HKW elecraftcov...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] Saying goodbye to the MicroKeyer?

You can not do FSK RTTY with the single USB cable - period, end of story. You also lose the benefits of the K1EL WinKey keyer - the K3 keyer may be one of the better ones around but it is not supported by most logging software and even Windows 10 is prone to stuttering when generating CW. 73,

[Elecraft] Saying goodbye to the MicroKeyer?

Hi all, Thanks to my recent troubles reconfiguring my K3s for USB CW operation has given me pause and I was wondering if it's possible to use just a USB cable for all PC<>K3s interactions. I do CW, SSB (live and .wav files), FSK-RTTY, a little PSK when needed and a very little JT-65 on occasion.

Re: [Elecraft] K30/Mini Audio Level

I'm not sure whether or how the RemoteRig might affect this, not yet having used it, but is the RemoteRig box connected to the remote radio using the Line Out jack, rather than the speaker or headphone jack? If so, I believe the way to control the volume may be by using the CONFIG:LIN OUT setting

Re: [Elecraft] Reported RX Frequencies in WSJT-X?

A little off topic but I observed upper atmosphere Doppler during an experiment made with HAARP several years ago. For those unaware, HAARP is an experimental high altitude scientific installation located about 250 miles East of Anchorage, AK. It was built by the Federal Gov't and run by

Re: [Elecraft] K3S/N1MM communications failed.

Be sure you allow the program through the firewall. You can look up the process via internet. Get Outlook for iOS On Wed, Nov 23, 2016 at 4:42 PM -0600, "Peter Dougherty" > wrote: My travel laptop upgraded itself to Windows

Re: [Elecraft] K3S/N1MM communications failed.

Peter, Maybe something like this could be related to your problem. I recently lost all my USB ports. They were dead. I let Windows 10 check for a better driver and it said I had the best one. So I went to the Lenovo website and put in my model and s/n, and it came up with a full screen to

[Elecraft] K30/Mini Audio Level

I've got a K30/Mini control head connected over the internet to my home QTH K3S using RemoteRig boxes. The audio volume from the K30/Mini is extremely low. Apparently the AF knob on the control unit (K30/Mini) does not control volume, rather it's set by the remote station (K3S). However it

Re: [Elecraft] K3S/N1MM communications failed.

OK, so I'm halfway there. I have CAT control back--I needed to change the RS-232 setting to USB. However, I am still out of luck in terms of sending keyboard CW via N1MM+. Seems to be a DTS/RTS problem and I’m trying everything. So far I can get the K3s into transmit mode, but no CW gets keyed.

Re: [Elecraft] K3S/N1MM communications failed.

Make sure CONFIG:RS232 is set to USB Cheers, Fred KE7X' From: Elecraft on behalf of Peter Dougherty Sent: Wednesday, November 23, 2016 3:42 PM To: elecraft@mailman.qth.net Subject: [Elecraft] K3S/N1MM

Re: [Elecraft] K3/P3 Question about Bandwidth display on P3

HiThe command you are using to change the bandwidth is incorrect. It isBW; not BWX;You supply bandwidth in 10hz increments. Thus for 300hz you issue BW0030;This is likely the source of your error.I have a bit of experience in programming the K3 and I have found only 4 bugs, that's it.

Re: [Elecraft] K3S/N1MM communications failed.

Peter; If you haven’t done so already, I strongly suggest you post this query to the N1MM reflector. You may get a good response here, but that reflector is the place for N1MM questions, and I’d bet you will get a quicker response in that forum. 73 & hope to Q in CWWCW! - Jack, W6FB > On Nov

[Elecraft] K3/P3 Question about Bandwidth display on P3

Hello, I just noticed what may be a bug in the L3/P3 software. Setup: 1. Using the K3/P3 combination 2. Using a macro to change bandwidth launched from the P3, via the Elecraft Utility program. 3. P3 set up to show bandwidth by making the cursor line running vertically wider of

[Elecraft] K3S/N1MM communications failed.

My travel laptop upgraded itself to Windows 10 earlier this summer. I have had no occasion or reason to fully dismantle my home station to test it out until today, the day before I leave for CQWW in VE3 but I have a show-stopper problem that I can't seem to fix. I have no communication between

Re: [Elecraft] K-Pod MCU 1.09 'F3 Power Up' Question

Great. Glad you found that. It is interesting that the RIT/XIT is multiplied by two for normal power on and the same for F3 power on. From: Marty Koszewski Sent: Wednesday, November 23, 2016 3:10 PM To: Cady, Fred Cc:

Re: [Elecraft] K-Pod MCU 1.09 'F3 Power Up' Question

Hi Fred, I re-installed the K-Pod and K3S firmware. The K-Pod is now working as it is supposed to. I must have had a ‘glitch’ in the original K-Pod firmware upgrade. The ‘F3’ at power up does the correct ‘divide by 4’. The K-Pod now resets itself when I cycle the power on the radio without

Re: [Elecraft] K-Pod MCU 1.09 'F3 Power Up' Question

That is interesting. I have my KPod powered from the K3 12v output so have been turning both off and on so haven't noticed the intermittents. In any event, the KPod is great! Cheers, Fred From: Elecraft on behalf of Marty

Re: [Elecraft] K-Pod MCU 1.09 'F3 Power Up' Question (RIT tunit)

I've done some more testing and it is interesting to see the tuning rate for the KPod RIT in comparison to the OFS RIT tuning knob. The K3 OFS knob changes the RIT frequency at about 500 Hz/rev. Normal KPod power-on, the KPod knob changes the RIT frequency at about 1 kHz/rev and when holding

[Elecraft] K-Pod MCU 1.09 'F3 Power Up' Question

Hi Fred, Thank you for your detailed response. I am able to get my K-Pod to behave as you described. However, the 'F3 power up' seems to work intermittently. I must cycle the radio and K-Pod to get the tuning rate change to take place. Re-powering the K-Pod only does not seem to consistently

Re: [Elecraft] K3s Err KP1?

Google elecraft err kp1 73, Guy K2AV On Wednesday, November 23, 2016, wrote: > Changed the feedline to the vertical dipole from 18ga ladder line to > 14ga and tested the system...all works fine except on 15m cw with > K3s/KPA500/KAT500 as usual. Barefoot, no msg, but with

[Elecraft] K3s Err KP1?

Changed the feedline to the vertical dipole from 18ga ladder line to 14ga and tested the system...all works fine except on 15m cw with K3s/KPA500/KAT500 as usual. Barefoot, no msg, but with K3s providing 23w of drive to get 500w out, I get an intermittent ERR KP1. Dont see this code in the

Re: [Elecraft] K-Pods and Contests

I agree — the K-Pod is really cool for contesting. I love that the K-Pod can sit right next to the keyboard *and* that it has a goodly number of F-Keys. I set mine up for CW SS as: F1 - SUB RX On/Off F1H - Diversity On/Off F2 - APF On/Off F3 - NB

[Elecraft] [KX2 + T1] Data cable

Will the KX2 or 3 communicate with a TI through a properly made data cable? I only see info on mating to a Yeasu rig. Has anyone gotten their KX to talk to a T1through one of the aux ports? It would be nice to put the T1 at the feedpoint of an antenna and have it talk to the rig. As it stands

Re: [Elecraft] K-Pod MCU 1.09 'F3 Power Up' Question

Hello Marty, I don't remember seeing any response to your question so here is what I have found with my KPod: The K3's tuning rate is determined by VFO CTS, FST and CRS and there are two fine rates (1 Hz and 10 Hz) and a course rate (100 Hz) depending on the FINE/COARSE switch. So when my

[Elecraft] KX3 / PX3 Combo For Sale

Sorry for any duplication - I think I sent previously from a bad email address. Offering for sale here first… KX3 S/N 46xx. Has the following accessories / add-ons: MH3 hand mic KXFL3 dual-passband roofing filter KXAT3 20 W tuner KXBC3 NiMH battery charger / clock ~25” power cord with

Re: [Elecraft] Reported RX Frequncies in WSJT-X?

On 11/23/2016 12:51 PM, Richard Lamont wrote: There are errors at the TX end, errors at the RX end and errors in the middle: ionospheric doppler shift. Doppler shifts are 1 Hz or less at these frequencies. Look to rig calibration as the major source. Many guys don't calibrate their

Re: [Elecraft] Reported RX Frequncies in WSJT-X?

On 11/23/2016 6:16 AM, MaverickNH wrote: Looking at WSJT-X 1.7rc2 ALL_WSPR log and seeing RX frequencies such as 14.0971282. Seems like too many digits unless reporting 10th of a Hertz as in 14,097,128.2 Hz. Perhaps this is calculated as an average over the RX window? Yes it is calculated:

Re: [Elecraft] Reported RX Frequncies in WSJT-X?

On 23/11/16 11:16, MaverickNH wrote: > Looking at WSJT-X 1.7rc2 ALL_WSPR log and seeing RX frequencies such as > 14.0971282. Seems like too many digits unless reporting 10th of a Hertz as > in 14,097,128.2 Hz. Perhaps this is calculated as an average over the RX > window? > > Looking at the log

Re: [Elecraft] KPA500 shutting down

I wanted to say thanks to Jack for spending time after hours analyzing my KPA500 log and providing some detailed analysis. While I haven't solved the problem yet, I have enough clues that possibly support my theory of a bad AC supply line. I will likely get to my remote base over the weekend, so

[Elecraft] Reported RX Frequncies in WSJT-X?

Looking at WSJT-X 1.7rc2 ALL_WSPR log and seeing RX frequencies such as 14.0971282. Seems like too many digits unless reporting 10th of a Hertz as in 14,097,128.2 Hz. Perhaps this is calculated as an average over the RX window? Looking at the log for RX over 500+ RXs, I find the RX frequency