When I first set up for digital modes on my K3 (probably in 2010) when I
long-pressed DATA MD and rotated VFO-B to select DATA-A it came up in
LSB instead of USB. I was on 28-MHz so SSB ran USB, but not DATA. I do
not recall exactly, but I forced it to USB (I think using the MODE
button).
Thank you all..
We are fixed again :)
Larry k6ro
-Original Message-
From: Carl
Sent: Sunday, June 20, 2021 7:06 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Firmware Update Failure ?
Look in the utility "help" tab. it tells you how to recover from this.
Carl
AB1DD
On
Look in the utility "help" tab. it tells you how to recover from this.
Carl
AB1DD
On 6/20/2021 9:11 PM, Larry Shapiro wrote:
Happy Father's day all !
I was updating the firmware today on a good working K3.
I have done this many times without any issues.
This time,while it was updating to
Happy Father's day all !
I was updating the firmware today on a good working K3.
I have done this many times without any issues.
This time,while it was updating to 5.67,it failed about 90% through.
A box came on saying to close the window on the k3 Utility program.
I did this,and was going to
- This mail is in HTML. Some elements may be ommited in plain text. -
Hi,
How are you doing? Do you have an account with Amazon ? Please let me know.
Dave
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
You need to Hold down DATA MD and select the right data sub-mode. It is set
per-band.
DATA A is usually the correct sub-mode for FT8. This uses the USB mode.
On 30m, you were likely using the AFSK A mode, which is similar, but uses LSB
mode. AFSK A is used for RTTY, generally.
> On Jun 19,
One possible gotcha is that the sub receiver is an option on the K3, and you
need to set a configuration menu item to say that it is installed. The
process is mentioned in the KRX3 manual and at the end of the K3 manual
where the various menu items are described.
Hold the CONFIG button (the
On 6/20/2021 11:31 AM, Richard Isaacs via Elecraft wrote:
Before using Elecraft, I used a Yaesu Ft 1000MP Mark-V Field and it was a
mere touch of a button to use the sub receiver. I have scoured Pages 37/38
and still have not come up with a way to individually use the 2 receivers.
Gee, it's
How this got to you I don’t know. I tried sending it to the reflector and it
came back as well. We’ll try again.
> On Jun 20, 2021, at 2:31 PM, Richard Isaacs wrote:
>
> Before using Elecraft, I used a Yaesu Ft 1000MP Mark-V Field and it was a
> mere touch of a button to use the sub receiver.
Before using Elecraft, I used a Yaesu Ft 1000MP Mark-V Field and it was a
mere touch of a button to use the sub receiver. I have scoured Pages 37/38
and still have not come up with a way to individually use the 2 receivers.
Perhaps it is in the setting, although I did adhere to the directions for
That was it, Mike. Dang windows messed with the settings. I've been
restoring this computer for 3 days now and I'm punchy with it.
Pete Chamalian, W1RM
w...@comcast.net
-Original Message-
From: Mike Flowers
Sent: Sunday, June 20, 2021 1:15 PM
To: w...@comcast.net
Subject: RE:
Just spitballing what I'd check:
Have you checked all the computer-side settings? There's output attenuation
in the app, per-app output volume (on some operating systems), and master
output volume.
If it can be toggled or there are separate jacks, are you using headphones
or line-out? Have you
My K3S occasionally does not put out any power when transmitting FT8. The
problem was usually resolved by turning the rig off then back on. Now it
doesn't want to put out RF when in that mode. It does transmit just fine on
CW.
The normal level of mic (Level) setting is 11-12 but now I
No difference with or without the microphone: of course, I never had an issue
on CW in the first place!
Tom W4KX
From: Ray
Sent: Saturday, June 19, 2021 2:50 PM
To: Wayne Burdick; Tom Doligalski
Cc: Elecraft Reflector; John Harper
Subject: RE: [Elecraft] K4 observation
Did You Trying
14 matches
Mail list logo
