Ahrendts, KC0XT
Los Angeles
David Ahrendts davidahren...@me.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
slots. I would really
like to use one of the software spectrum displays (maybe iSDR for the iPad, or
a Mac equivalent). However, they require ACC1 out. Can ACC1 be split somehow
for two devices?
David Ahrendts, KC0XT, Los Angeles
David Ahrendts davidahren...@me.com
to the KX3 (ie. it is basically a daisy chain connection topology)
73,
Matt VK2RQ
On 24 Oct 2014, at 3:38 am, David Ahrendts davidahren...@me.com
mailto:davidahren...@me.com wrote:
KX3 serial 6-thousand something is born. Very impressed. What a tight little
machine. Maiden QSO last
. This rather acts like
RF feedback. Maybe I just need to follow better RF hygiene here (higher quality
coax cables, making sure RF does not loop back on a power cable, etc.). Any
collective wisdom appreciated.
David Ahrendts, KC0XT, Los Angeles
David Ahrendts davidahren...@me.com
Message delivered to davidahren...@me.com
David Ahrendts davidahren...@me.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
even at level 1. What’s
actually happening when the compressor is turned on? Is the audio intentionally
shaped differently? Highs and lows clipped off?
David Ahrendts, KC0XT, LA
David Ahrendts davidahren...@me.com
__
Elecraft
. In reading the article I kept thinking
how much greater the KX3 would be if they could implement this. Elecraft, is
this possible? Please?
Gary Mitchelson
NC3Z Davidsonville, MD FM18
NC3Z/4 Pamlico County, NC FM15
http://www.mitchelson.org/
On 11/11/2014 9:27 AM, David Ahrendts wrote
@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to davidahren...@me.com
David Ahrendts davidahren...@me.com
__
Elecraft mailing
transmitted) than
500 watts with a 4MHz ESSB signal?
David Ahrendts, KC0XT
David Ahrendts davidahren...@me.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
signal would be
more effective.
How did you find 4KHz with none of those contesters on it? Incredible
accomplishment!
73, Phil W7OX
On 11/17/14 10:22 AM, David Ahrendts wrote:
Experimented yesterday for a few minutes with ESSB (carefully avoiding
weekend contesters), and it raised
that at the receiving end, the operator can narrow his
bandwidth which lowers the noise floor that he hears underneath you.
Al W6LX
_
As bandwidth is broadened, is effective radiated power diluted?
David Ahrendts, KC0XT
Newby KX3 question: how accurate a representation of voice and transmission
characteristics does the Voice Monitor provide on SSB (with accurate
headphones, not the KX3 speaker)? Is it approximate, or actual?
David Ahrendts, KC0XT, LA
KX3, KXPA500, PX3
David Ahrendts davidahren...@me.com
/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to davidahren...@me.com
David Ahrendts davidahren...@me.com
OTA S9+ copy. So
I’m experimenting with that mich and with the Elecraft MH3. Thanks for
comparing notes. 73’s.
David Ahrendts, KC0XT, LA
KK7P, Lyle: Note that the KX3 has a great tool for adjusting Tx EQ and CMP.
Record your voice using the DVR, then play it back using MON. Adjust Tx EQ
hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to davidahren...@me.com
David Ahrendts davidahren...@me.com
__
Elecraft mailing list
Home: http
you’ree not speaking. Best to you all and 73s.
David Ahrendts, KC0XT, Los Angeles
On Nov 19, 2014, at 6:31 PM, Don Wilhelm w3...@embarqmail.com wrote:
David,
The part of the equation that you are not realizing is that there is an
inherent delay in DSP processing that may not be apparent
I want. Nice.
Anyone else doing this?
David Ahrendts, KC0XTR, Los Angeles
David Ahrendts davidahren...@me.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
are you using for antenna when in the back pack mode?
Thank you
Absolute beginner here
Have the KX3 and studying for technicians exam
Thanks
On Nov 23, 2014, at 18:26, David Ahrendts davidahren...@me.com wrote:
Tell me I’m not thee only wacko doing this: a KX3 into a KXPA100
hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to davidahren...@me.com
David Ahrendts davidahren...@me.com
__
Elecraft mailing list
Home: http
a precise measurement,
happy to do that for you.
David Ahrendts, KC0XT
On Dec 9, 2014, at 3:20 PM, stan levandowski sjl...@optonline.net wrote:
I'm just a click away from ordering a PX3, and I've perused the FAQs and
online manual but still have a question that some PX3 owner on this list
a control cable or
a display cable across the coax. You’ve probably tried all of this, but my two
cents.
David Ahrendts, KC0XT, LA
On Dec 22, 2014, at 6:24 AM, Sam Morgan k5oai@gmail.com wrote:
My K3-KAT500-KPA500 has been working fine for 5 weeks now. (added the KPA500
Nov. 10, 2014
? I am running the
KAT500 and the W2 utility programs continually via their KXUSB cables since it
gives excellent higher rez stats on output, performance.
Happy New Year everyone.
David Ahrendts, KC0XT, Los Angeles
David Ahrendts davidahren...@me.com
for
every microphone on its web site, and the Elecraft folks can give you the pin
designation for the mini-plug which, if I remember, is simply
element/PTT/ground. The Gold Elite is a hand held with a PTT switch.
David Ahrendts, KC0XT
On Dec 31, 2014, at 5:48 PM, John Glascock (N0IB) n0ib.j
Total newby to RTTY. Wanna learn it. What Mac OS software do you recommend for
the KX3 for RTTY and other data?
David A., KC0XT
David Ahrendts davidahren...@me.com
__
Elecraft mailing list
Home: http://mailman.qth.net
the Samsung Galaxy Note® 3, an ATT 4G LTE smartphone
Original message
From: David Ahrendts davidahren...@me.com
Date:01/02/2015 6:14 PM (GMT-05:00)
To: Elecraft List Elecraft@mailman.qth.net
Cc:
Subject: [Elecraft] KX3+KXPA100+PX3 = Outta Inputs/Outputs
Got the KX3 Line
? None
available. Can the ACC1 port be Y’d?
David Ahrendts, KC0XT, LA
David Ahrendts davidahren...@me.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Correcting myself yet again: the KXPA100 port is labeled RS232 PC” — guessing
that is the same as ACC1.
David A., KC0XT
On Jan 3, 2015, at 9:15 AM, David Ahrendts davidahren...@me.com wrote:
David, BINGO. Your sequencing suggestion worked. I have the KXUSB plugged
into the KXPA100 ACC2
. Then turned on the PX3,
and all is sailing along smoothly. I then brought up the KX3 utility program
and it initialized beautiful finding the KX3 in the daisy chain.
Thanks much gentlemen. This gets me into RTTY with FLDigi and cocoaModem,
MacLoggerDX, etc. YAY!
#HapyNewYear to you all.
David Ahrendts
Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of David
Anderson
Sent: Saturday, January 03, 2015 2:13 AM
To: David Ahrendts
Cc: Elecraft List
Subject: Re: [Elecraft] KX3+KXPA100+PX3 = Outta Inputs/Outputs
Can you explain what you have connected to the ACC1
Via @BoingBoing: Google Earth Pro was $399. Now it's free.
http://boingboing.net/2015/02/04/google-earth-pro-was-399-now.html …
http://t.co/1mIKQJhVo9 pic.twitter.com/2MtDJxznmY
http://pic.twitter.com/2MtDJxznmY
David A., KC0XT
David Ahrendts davidahren...@me.com
David Ahrendts wrote on 2/4/2015 12:14 PM:
Via @BoingBoing: Google Earth Pro was $399. Now it's free.
http://boingboing.net/2015/02/04/google-earth-pro-was-399-now.html …
http://t.co/1mIKQJhVo9 pic.twitter.com/2MtDJxznmY
http://pic.twitter.com/2MtDJxznmY
David A., KC0XT
David
Now to get it to auto-locate to the exact QTH in a real time QSO! Would that be
cool. :—)
On Feb 4, 2015, at 10:19 AM, Nick Kemp nkemp1...@hotmail.com wrote:
Better yet ... download it free from the source ...
https://www.google.com/earth/
Nick
N1KMP
David Ahrendts wrote on 2/4
http://www.cnbc.com/id/102376507 http://www.cnbc.com/id/102376507
David Ahrendts davidahren...@me.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
http://www.cnbc.com/id/102376507 http://www.cnbc.com/id/102376507
David Ahrendts davidahren...@me.com mailto:davidahren...@me.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Phil, you were 59+20 into LA this morning off the South side of your beam.
Gonna try you QRP one of these weeks. Maybe a wire in the trees from Mt. Baldy.
Sent by Apple iPad3 magic!
On Feb 7, 2015, at 4:56 PM, Phil Shepard ph...@riousa.com wrote:
The weekly SSB net meets on Sunday at
. Love digital
with the KX3.
David Ahrendts, KC0XT, Los Angeles
On Jan 8, 2015, at 7:28 AM, David Ahrendts davidahren...@me.com wrote:
Begin forwarded message:
From: Dave B g8kbvd...@googlemail.com mailto:g8kbvd...@googlemail.com
To: elecraft@mailman.qth.net mailto:elecraft
David Ahrendts davidahren...@me.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
Mark, I’m just a few months into the wonderful KX3 + PX3 + KAT500 (brag) — love
all things Elecraft. MacLoggerDX works very well. FLDigi also is well matched.
Bit of a learning curve on FLDigi, but excellent signal reports and substantial
contacts. Happy to assist if you need.
David Ahrendts
(which I never
got to work), someone mentioned checking the mini-plug type. Remember the KX3
microphone plug is a tip-ring-sleeve plug (TRS). Presumably a mono or stereo
plug would cause unexpected things to happen.
My two cents for you.
David Ahrendts, KC0XT, LA
On Jan 29, 2015, at 8:32 AM
Also, part of the magic of using FLDigi and a SignaLink card is that the
software does all of the work by design. The KX3 remains in SSB mode for PSK or
RTTY, so it becomes a quick cable swap to plug in digital or plug in a
microphone.
On Jan 29, 2015, at 8:40 AM, David Ahrendts davidahren
to davidahren...@me.com
David Ahrendts davidahren...@me.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
. What am I doing
wrong?
David Ahrendts, KC0XT, LA
David Ahrendts davidahren...@me.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
for connection issues. He
informed that MacLoggerDX will not work properly with the KX3 Utility
operating. You might try one or the other.
Just my two cents.
David Ahrendts, KC0XT, LA
On Jan 6, 2015, at 4:16 PM, robertok hamky...@gmail.com wrote:
I'm having issues with connecting my Mac with my
If ya Twitter, it is this very day: World Radio Day. Put a pix of your ELECRAFT
rig on Twitter, hash tag WorldRadioDay.
David Ahrendts davidahren...@me.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to davidahren...@me.com
David Ahrendts davidahren...@me.com
several smaller
bricks. They use Power Werx in the field. Appears the single DC amp is the
quietest and cleanest.
David Ahrendts, KC0XT, LA
On Feb 10, 2015, at 12:26 PM, Lynn W. Taylor, WB6UUT
k...@coldrockshotbrooms.com wrote:
Has anyone tried a 12v brick like most laptops use for their KX3
Absolutely love my Dr. Dre's BEATS earbuds with the KX3.
Sent by Apple iPad3 magic!
On Mar 22, 2015, at 7:03 AM, Jon Zaimes j...@verizon.net wrote:
The iPhone buds that came with several phones have been best sound of
various ones I've tried (though not sure if ever used any Sony).
A Tesla. Now that would be a great battery pack for the mighty little KX3!
Probably run the KPA100 also. :—) Just dreamin’.
David A., KC0XT
David Ahrendts davidahren...@me.com
__
Elecraft mailing list
Home: http
A quickie: wanna take it on a hike. Got my wire. Got the ATU. Charging up the
batteries. Operating SSB QRP @ 5 watts (maybe less), how long would you expect
the batteries to last? Operating CW same?
David A., KC0XT
David Ahrendts davidahren...@me.com
:
And feeds power back into the power grid so you have no more electric bill.
David K0LUM
On Apr 1, 2015, at 5:32 PM, David Ahrendts davidahren...@me.com wrote:
Oh yes! Further, following the masterful design of the KPA500, the K6
boasts a 450-pound transformer that produces that 5 KW
://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to davidahren...@me.com
David Ahrendts davidahren...@me.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
://www.qsl.net/
Please help support this email list: http://www.qsl.net/donate.html
http://www.qsl.net/donate.html
Message delivered to davidahren...@me.com mailto:davidahren...@me.com
David Ahrendts davidahren...@me.com
to davidahren...@me.com
David Ahrendts davidahren...@me.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
David Ahrendts davidahren...@me.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
-dimensional. Not flat. Very
nice. Especially with phones. And I’m building some EQ’d Audio Engine 2 small
speakers that really are effective with AFX MD Delay.
David Ahrendts, KC0XT, Los Angeles
David Ahrendts davidahren...@me.com
://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to davidahren...@me.com
David Ahrendts davidahren...@me.com
: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to davidahren...@me.com
David Ahrendts
Flawlessly. Perfectly. 30 watts out of the KXPA100 typically drives the KPA500
to 500 watts. Contact me off list if you wish.
David Ahrendts, KC0XT, LA
davidahren...@me.com
On Jun 18, 2015, at 3:09 PM, Chris Tate - N6WM ct...@ewnetinc.com wrote:
How well does this setup work? I am sure
: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to davidahren...@me.com
David Ahrendts davidahren...@me.com
__
Elecraft
/donate.html
Message delivered to davidahren...@me.com
David Ahrendts davidahren...@me.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
If you want to part with a Buddipole Deluxe, I am in the market. Contact me OFF
LIST @ davidahren...@me.com mailto:davidahren...@me.com — many thanks. This
thread is closed. Off list only.
KC0XT, Los Angeles
David Ahrendts davidahren...@me.com
to 4kHz) produces
an extraordinary result. Best wishes. Happy to demo for you — contact me off
list and we can set up a 20M QSO.
David Ahrendts, KC0XT, Los Angeles
On Jul 5, 2015, at 4:59 AM, Bob McGraw - K4TAX rmcg...@blomand.net wrote:
New to the Reflector and new to Elecraft with a K3S
Pros: what is the operating advantage of the KTCXO3-1 1 PPM reference
oscillator over the standard ‘ol bargain basement 5 PPM ref osc supplied with
my lovely new K3S?
David Ahrendts davidahren...@me.com
__
Elecraft mailing
/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to davidahren...@me.com
David Ahrendts davidahren...@me.com
How would you use the K3S Sub Receiver?
David Ahrendts davidahren...@me.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
connection
modification to prevent or lessen that power up pop?
It occurs to me the simplest thing to do is to power up the K3S and then power
up the speakers.
David Ahrendts, KC0XT, Los Angeles
David Ahrendts davidahren...@me.com
myself for that! :—) Five stars
people. Bravo, bravo, bravo.
David Ahrendts, KC0XT, Los Angeles
On Jul 27, 2015, at 3:11 PM, Keith Robinson w4...@charter.net wrote:
Hello All,
I have K3S s/n 10027. I have had it since July 6th and I am VERY happy with
the K3S.
It out performs any other
http://katyonthehill.com/fcc-votes-to-close-11-field-offices/
David Ahrendts davidahren...@me.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to davidahren...@me.com
David Ahrendts davidahren...@me.com
is your setup?
I have attempted with a USB hub into a Mac Mini with marginal success. Please
opine.
David A., KC0XT
David Ahrendts davidahren...@me.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
Off-topic. Anyone on the list have experience with zoning and permitting an
amateur radio tower in the City of Los Angeles. City of LA only. Please contact
directly off list. davidahren...@me.com <mailto:davidahren...@me.com>
David A., KC0XT
David Ahrendts davidahren...@
Top end can adjusted to ESSB 4.0 kHZ, but what is the bottom end of the TX
bandwidth? 500 Hz? Or…?
David A., KC0XT, LA
David Ahrendts davidahren...@me.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
If you use an external EQ and compression device/s, curious what you use and/or
recommend.
David A., KC0XT, LA
David Ahrendts davidahren...@me.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
Noticeable difference between the K3S S-Meter level and the displayed S-level
on the P3. An S-9 signal on the K3S is seen as much less, maybe an S-3 on the
P3. So its not REF LVL, not SPAN. What?
David A., KC0XT, LA
David Ahrendts davidahren...@me.com
Quick help on connecting the SteppIR SDA 100 controller to the K3S for brand
tracking, please. Is it the SteppIR Y-cable from the K3S ACC? Or does one use
the Elecraft KPAK3AUX cable set Y-connector?
David Ahrendts, KC0XT, LA
David Ahrendts davidahren...@me.com
menu setting but
> I don't remember the exact name. AUTOINF or something like that. It should be
> turned on. I'm 36,000' over AZ at the moment so can't really check. Left from
> Atlanta, maybe flew over your house an hour or so ago :)
>
> Jim
>
> On Oct 12, 2015 2:04
delivered to davidahren...@me.com
David Ahrendts davidahren...@me.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Cohutta, GA K3 #8133
K4HSG Steve Webbville, KY HW 101
David Ahrendts, KC0XT, Los Angeles, KX3 #6980 + KPA500
David Ahrendts davidahren...@me.com
__
Elecraft mailing list
Home: http
tune
transmission again. KAT500 says 1:1.2 or less. W2, the same. RED LIGHT city
again on the KPA500. Removed the cable and we return to sweet green all around.
So: ya don’t operate the KPA500 with the KUSB attached, right?
David Ahrendts davidahren...@me.com
shack, being specific for the computer to KPA connection.
Jack Brindle, W6FB
Elecraft Engineering
On Aug 26, 2015, at 1:09 PM, David Ahrendts davidahren...@me.com wrote:
Just took delivery of the KUSB for the KPA500. Discovered I am up to speed
on FW and saved the config. Left the KUSB
combined. So, you need a powered USB hub
to connect a few.
On Aug 24, 2015, at 7:11 PM, Phil Wheeler w...@socal.rr.com wrote:
Hmm .. I've not tried that. I'd be cautious trying it. Really no need, after
all.
73, Phil W7OX
On 8/24/15 6:57 PM, David Ahrendts wrote:
In a multiple Elecraft
On Aug 26, 2015, at 3:44 PM, David Ahrendts davidahren...@me.com
mailto:davidahren...@me.com wrote:
Interesting, Jack. K3S to KPA500 to KAT500 and a W2 to MA5B typically 1:1.2.
Perfecto!
Connected the just received KUSB-KPA500 cable to the amp and to a USB port
on my Apple Thunderbolt 27.5
What do you regard as “high power?” Is our beloved KPA500 at 500 watts a high
power device? Or do you have to have a big Alpha at legal limit?
David Ahrendts davidahren...@me.com
__
Elecraft mailing list
Home: http
on OS X El Capitan beta Version 10.11 (15A278b). And believe me,
there have been/are plentiful Mac sleep-wake issues before they finalize.
David A., KC0XT, LA
> On Sep 7, 2015, at 2:39 PM, David Ahrendts <davidahren...@me.com> wrote:
>
> What can ya do to keep your fabulous Mac OS
icon and checking the
> "Prevent App Nap" box in he info window? This will prevent the Mini from
> going into sleep mode when you're running MacLogger.
>
> 73,
> Scott N9AA
>
>
> On 9/7/15 5:39 PM, David Ahrendts wrote:
>> What can ya do to keep your fabulou
fo/elecraft>
> Help: http://mailman.qth.net/mmfaq.htm <http://mailman.qth.net/mmfaq.htm>
> Post: mailto:Elecraft@mailman.qth.net <mailto:Elecraft@mailman.qth.net>
>
> This list hosted by: http://www.qsl.net <http://www.qsl.net
that this provides some clues,
and if you have further questions, please feel free to e-mail me, and I'll
try to help.
Very 73,
Bayard R. Brandy Coolidge, N1HO
David Ahrendts davidahren...@me.com
__
Elecraft mailing list
Home: http
drain which
requires (I know, poor me!) re-starting the Mac Mini to re-initialize the USB
port with the KUSB. Not a big thing, but maybe there is a way to refresh the
USB devices connected (a Mac issue). Anyone?
David Ahrendts davidahren...@me.com
raft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to davidahren...@me.com
David Ahrendts davidahren...@me.com
__
Elec
-and-upgrading-to-os-x-1011-el-capitan
<http://www.machamradio.com/blog/2015/9/10-fldigi-and-upgrading-to-os-x-1011-el-capitan>
Thanks, as always. Happy to answer any question off list also.
David Ahrendts, KC0XT, Los Angeles
davidahren...@me.com
> On Sep 20, 2015, at 5:09 PM, Bob McGraw - K4
Anyone configured with the K3S, FLDIGI and a Mac device? Need the quick
shortcut on rig control connections, audio in and out.
I was setup on the KX3 with a SignalLink USB with rig control. With the K3S, I
have rig control for Mac Logger.
David A., KC0XT
David Ahrendts davidahren...@me.com
impressed. Here’s the
Endgadet review with the link to the app:
http://www.engadget.com/2015/11/28/see-the-radio-waves-constantly-bathing-you-with-this-app/
David A., KC0XT, Los Angeles
David Ahrendts davidahren...@me.com
_
initialized.
David Ahrendts, KC0XT, Los Angeles
David Ahrendts davidahren...@me.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
NPRs Ina Jaffe on the National Hearing Test:
http://www.npr.org/sections/health-shots/2015/12/21/459397027/is-everybody-mumbling-try-a-hearing-test-you-take-on-the-phone
This test not unlike most of our “pick the signal out of the noise”
experiences.
David A., KC0XT, Los Angeles
David
ewhere else
>
> Bob
> K6UJ
>
>
>
> On 12/21/15 6:11 PM, David Ahrendts wrote:
>> NPRs Ina Jaffe on the National Hearing Test:
>> http://www.npr.org/sections/health-shots/2015/12/21/459397027/is-everybody-mumbling-try-a-hearing-test-you-take-on-the-ph
out on this list or directly. Happy to assist.
David Ahrendts, KC0XT, Los Angeles
K3S #10125
> On Nov 29, 2015, at 12:13 PM, Ian <ik7...@verizon.net> wrote:
>
> If you're building the kit there's a PDF at
> http://www.n8ik.net/kitbuilding.php of how I did min
:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to davidahren...@me.com
David Ahrendts davidahren...@me.com
_
. The connector shell
should be grounded also for best RF protection, yes?
XLR pin #2 to K3S 8-pin #1, mich audio
David A., KK6DA, Los Angeles
David Ahrendts davidahren...@me.com
__
Elecraft mailing list
Home: http
plifier/272234339459?_trksid=p2060778.c100276.m3476&_trkparms=aid=222007=SIC.MBE=1=20140725133649=a46bc7a1c1274120a571252811a8f6bb=100276=1=4=121996613826>
David Ahrendts, KK6DA, Los Angeles
David Ahrendts davida
t looking for it...
> Thank you... I think I will TRACK when they are stable vs. drifting...
> First, I need to find a good battery and QUIET float charger for the K3/P3.
>
> Lot of info in short reply. S-Meter Lite... Thanks! Got it now.
> Need to research/build the loop(s).
>
1 - 100 of 131 matches
Mail list logo