The AF pot from Elecraft parts department costs $1.00. Jump on it.
de Joe, aa4nn
--
K2 #2636 has finally developed enough irregular operation of the audio gain
pot that I'll be doing the AF gain pot mod soon. It's become so erratic
that I'm wondering if I should actually
What's wrong with simply holding the diode body
between thumb and forefinger and bending the lead
against your thumbnail?
de Joe, aa4nn
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber
to support an antenna, so
you carry your own fiberglass poles. I worked many, many stateside and EU
stations with this portable antenna.
73, de Joe, aa4nn
I recently built an 80/40 meter half-wave dipole using
Pink Floyd, A Momentary Lapse of Reason also CCR
de Joe, aa4nn
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman
Hi Doug all,
I used a doublet (center fed zepp) with 22 feet on each horizontal side then
a 44 foot piece of 300 ohm TV lead back to the tuner. In my case the tuner
was the KAT100 which tuned this doublet 1.1 to 1, 40m to 10m. Good luck
73.
de Joe, aa4nn
Hi Lynn,
Stateside QSL cards from T33C are beginning to hit the mail over past few
weeks.
73, Joe, aa4nn
T33C team member, aka T33NN
- Original Message -
From: Cherie and Lynn Hammond [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Sunday, August 22, 2004 11:26 AM
Subject: [Elecraft
it's
too bad they aren't strong enough for surf fishing during a time when the
bands might be closed.
73, Joe, aa4nn
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change
You can order from Elecraft. 78M05, part number E600024
de Joe, aa4nn
But, I need to find an LM7805 in the small wee package the comes
with the K2s. I have been to Mouse and all they have
is the TO-220 at 1A. Don't need that...just the small we packaged one.
Where do I go to find
Hi 'Crafters,
Anyone needing SC for Elecraft WAS I will be on or near 7051 from now until at
least 10AM EST Sunday working SC QSO Party using K2 NR3751.
73, de Joe - aa4nn
All email scanned by Norton Antivirus
___
Elecraft mailing list
Post
.
But the contest was fun using my K2 at 5 watts and portable center fed Zepp.
All of my 29 haircuts were given out on 40m, including 4 barbers and one dup.
Thanks to all for all the Qs.
The next Barbershop Contest will be December 29th. It happens I will be in
Houston, TX, for that one.
73,
de Joe
.
But the contest was fun using my K2 at 5 watts and portable center fed Zepp.
All of my 29 haircuts were given out on 40m, including 4 barbers and one dup.
Thanks to all for all the Qs.
The next Barbershop Contest will be December 29th. It happens I will be in
Houston, TX, for that one.
73,
de Joe
done this or am I too much
QRO and heat is normal. hi
73, Joe, aa4nn
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net
to know where
you were in the first place. k2 is a great radio, tho, I love it.
73, Joe, aa4nn
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc
Say this antenna doesn't get out much? hmmm
de Joe, aa4nn
I have for sale:
Ventenna's HFp 10-40 meter Portable Antenna. Used little (don't get out
much). Has all parts etc. For details, see www.ventenna.com.
___
Elecraft mailing list
Post
It's called a Receiver Front-end Protector. See WX0B.
73, Joe, aa4nn
Hi Guys:
I am just finishing up my 2nd K2, and I am intrigued by the idea of using
dual K2s in split operations. I was wondering if others have tried this,
and how one might manage to use the same antenna for transmit
have enough level to work with the
insensitive Heil element. But remember when using other elements you have
to go down in setting to avoid distortions.
73, Joe, aa4nn
--
Hi all,
I am currently using my K2 with a Heil HC-5 insert to good effect on
DX. I
Just parallel them together, no problem.
de Joe, aa4nn
Hi guys,
This discussion reminds me of something I've been wanting to for a
while. I don't use the internal keyer in the K2 but prefer my
own keyer and I'd like to parallel my computer/cw keyboard with it. What
kind of circuit would
an antenna to position
Antenna2 and see what happens.
73, Joe, aa4nn
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman
keying and am building the Winkey kit when it
arrives.
73, Joe, aa4nn
- Original Message -
From: Charles Greene [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Tuesday, October 26, 2004 12:12 PM
Subject: [Elecraft] USB to Serial converter
Hi,
Anyone know of a good, inexpensive
.
K1EL needs to put the transistor keying circuits right on his PCB and
thereby eliminate altogether the requirement for a Com adapter.
I have the WinKey CW Keying Kit or order and will be reporting on its
effectiveness.
BTW, what is K2's KY facility?
73, Joe, aa4nn
Can someone comment
I would forget checking relays for the moment. Take a look at the coupling
capacitors for the 20m/30m circuit, the ones installed on the bottom of the
board. Make sure solder flowed through to the top of the board for good
connection to the traces up there. This was my 20m problem.
73, Joe
?
73, de Joe - aa4nn
All email scanned by Norton Antivirus
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo
Thanks for the tips. The K2 PA Keyout line to the Tokyo Hy-Power Send
input works perfectly for putting the linear amp into transmit mode. I set
the T-R delay to .75 for a good delay time when sending slow code.
Thanks for all the replies.
73, Joe, aa4nn
K2VCO Wrote:
You shouldn't have any
Look at the 3rd step, page 15. R22 replaces a silk screened diode.
de Joe, aa4nn
--
: [Elecraft] K2 Control Board
K2 manual in parts listing shows an R22 , an 82K resistor.
I see no reference to this in the control board assembly or a place on the
board
What I like about this reflector is that once in a while
something related to Elecraft products gets posted.
Keep up the good work.
de Joe, aa4nn
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
is not exactly on the second with another, and what
they really wish they had would be a GPS clock and then we
have the same 25 guys talking about GPS, ad infinitum.
Maybe I've just had enough of this off topic stuff. de Joe, aa4nn
Chuck said:
Your right. The reflector was intended to provide a technical
Find installation of R6 as follows:
Page 17, last step before the paragraph: Power Calibration (R1 and R2)
Congrats and good luck.
73, Joe, aa4nn
I have just completed building my KAT2 for K2 SN4519. I have one
resistor, R6, left over and upon several rereads
the keying line to the K2 is activated.
I have also used the PA Key out from K2 to a PTT
input on some amps, like Tokyo Hi-Power. Works
de Joe, aa4nn
-Tec Centurion and Ten-Tec Centaur have two options for
inter-connection first is the single control T/R line but that won't
support QSK (at least
bending or otherwise making
a mess of things. But there will be some tuning and aligning to
keep it all interesting. You'll be proud you did!
de Joe, aa4nn
I'm curious, I've never had to deal with moduler kits before. waht's
involved in putting them together? the most I've had to fiddle about
.
de Joe, aa4nn
- Original Message -
From: Dave Martin [EMAIL PROTECTED]
To: Chuck Catledge [EMAIL PROTECTED]
Cc: elecraft@mailman.qth.net
Sent: Tuesday, November 27, 2007 3:35 PM
Subject: Re: [Elecraft] K3: Firmware Utility Errors
On Nov 27, 2007 3:23 PM, Chuck Catledge [EMAIL PROTECTED
Joe, aa4nn
I understand your point, Joe. OTOH, as a reflector subscriber, I am happy
to see posts, and answers, to questions such as this. They are often of
use
to other subscribers which wouldn't happen with a direct Elecraft support
email. Also, other users may have the answer which saves
Does that requirement exist for home built equipment? Surely you could
argue that the K3 is something you built yourself.
As pretty and sophisticated as the K3 is...I rather doubt
the slickest car salesman could convince an authority that
the radio was a home built one.
de Joe
Right on, Don.
The amp must protect itself by itself and for itself.
Like Overdrive, High SWR, Hi drain current, ad infinitum.
Modern SS amplifiers all have this built in protection.
Like many, I have never used ALC, being CW only, but I
take care of drive power to protect the amplifier.
de Joe
You will need a separate cable between LPT port
and Key-in to the K2. Set INP to Hand. Wire
your favorite keyer output in parallel with the line
into the K2 Key-in.
de Joe, aa4nn
- Original Message -
From: David Wilburn [EMAIL PROTECTED]
To: elecraft elecraft@mailman.qth.net
Sent
John,
Have you tried the following?
Go into Primary Menu and select Set (tone) Level, ST L
Tap the display...your tone should come back.
73, Joe, aa4nn
- Original Message -
From: John [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Wednesday, December 05, 2007 12:55 PM
Subject
looking package.
You can sell off the KIO2 and KAT2, they are excess now.
de Joe, aa4nn
- Original Message -
From: n0jrn [EMAIL PROTECTED]
OK gang:
I've about finished the build on my K2. As I look forward and
consider
the options I've bought, I'm puzzled over what I really
if you have the bux, go for it all.
de Joe, aa4nn
- Original Message -
From: Mike Geddes [EMAIL PROTECTED]
To: Elecraft elecraft@mailman.qth.net
Sent: Monday, December 10, 2007 12:13 PM
Subject: [Elecraft] Recommended K3/100 filters
My K3/100 has been on order for a couple of weeks now
Not me, I am CW only and never get above 28.050mHz.
de Joe, aa4nn
!
Whatever happened to minding your own business. If Joe wants to open his
radio to all freqs so be it. Maybe he has a good reason. Does it affect
anyone else
If you have DSP enabled for SSB,
you might turn it off. DSP can often
make your radio dead as a doornail.
de Joe, aa4nn
I am trying to receive on an early K2, and it has been several years since
I
have used one. For some reason, I can only copy ssb when c mode is
displayed?? When displayed
showing up later and especially
after being bumped and smacked around in the luggage.
Plus, at the zero hour we ordered a bunch of upgraded
chips which were to be installed while convening in Fiji
Islands. Lots of new things from Elecraft yet the K2s
performed perfectly and it was all just amazing.
de Joe
Benny, it's just the turn of a pot!
How difficult or inconvenient could that be. hi
de Joe, aa4nn
- Original Message -
From: Benny Aumala [EMAIL PROTECTED]
Maybe my interest to QRP is partially because K2.
I want to use my K3/100 still quite a lot in QRP and QRPP.
The degree of adjust
I have a May 22nd order with deposit. I must be about 40db down.
de Joe, aa4nn
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
Or the faster you spin the knob the larger the stepping increment.
de Joe, aa4nn
- Original Message -
From: David Ferrington, M0XDF [EMAIL PROTECTED]
I's been suggested to me by someone not on this reflector (shame), that
the
power control should perhaps be logarithmic - running in dB
aaah yes, AFX, Audio Factitious Extraordinaire
de Joe, aa4nn
---
Yes, I just leave AFX on all the time - in fact, I guess that's one
function
that could be put int the MAIN menu and the button freed up for something
else.
when I hit the AFX button just to see what
I revised my order to eliminate the KRX3.
Added an additional filter to the order.
de Joe,. aa4nn
should cancel their orders forthwith. I know I
would.
Good try Garry buddy - if nnnyyy it was that
easy. !!!
___
Elecraft mailing list
Post
Over the phone a gentleman should never ask a lady what she was wearing.
de Joe, aa4nn
- Original Message -
From: [EMAIL PROTECTED]
I have received an eMails from Lisa a few Sundays ago regaridng my order.
It was a pleasent surprise. Of course I never asked her what she was
wearing
Well, David, I'm sure you can get it all figured out in due time.
de Joe, aa4nn
- Original Message -
From: David Ferrington, M0XDF [EMAIL PROTECTED]
I think I'd like the option of being able to tune VFO B (sub-Rx when I get
it) on VFO A, but still stay in split and not have to do
, but would appreciate some tips here.
de Joe, aa4nn
__,_._,___
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman
if you will. I'll be running
some tests with my buddies soon.
Thanks for all the help from a terrific group.
73, Joe, aa4nn
See page 18 of
http://www.elecraft.com/manual/KSB2%20manual%20rev%20E.pdf.
vy 73 de toby
___
Elecraft mailing list
Post
Go to: http://n1mm.com/
and download the full version 7.0 and with it you
get a really good standalone grayline program.
While you are at it, n1mm is an excellent contest
logger. Give it a go.
de Joe, aa4nn
- Original Message -
From: Robert 'RC' Conley [EMAIL PROTECTED]
To: elecraft
How soon we forget! All the crying and moaning about
the screws in the K2 and why in the world didn't Elecraft
countersink those screws. You guys are just too much!
de Joe, aa4nn
---
In a recent message, Brett Howard [EMAIL
Yeah, I had a little blood rush myself
seeing as how I ordered on May 21.
de Joe, aa4nn
- Original Message -
From: Dave Agsten [EMAIL PROTECTED]
that Doug received his K3 ordered on May
18th (Was that ordered at Dayton?) and another
notification was sent for a K3 ordered on May 21st
If I were you, Mike, I would just go ahead and plan
on having an external switch box, maybe out in
front of your amplifier. Not practical inside the K3.
de Joe, aa4nn
- Original Message -
From: AD6XY - Mike [EMAIL PROTECTED]
Do we know if there are any plans to allow several outputs
It is a simple answer, really. A factory built K3 and you're all set.
de Joe, aa4nn
- Original Message -
From: John Tobias Croteau [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Saturday, June 30, 2007 8:23 PM
Subject: [Elecraft] K2 or K3
As some of you know, I've been
Drive power for the Expert 1K-FA amplifier
is Typically 20W for full output. Typically.
I would think it ambitious to expect full output
with just 20 watts drive. Just my opinion.
de Joe, aa4nn
.
- Original Message -
From: Dale Parfitt [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
If they don't want us to drive us fast, why do they make such cars? And why
do the speedometers go up so high?
Maybe the high numbers are to accomodate conversion to Kilometers/hour
de Joe, aa4nn
___
Elecraft mailing list
Post to: Elecraft
I have put 300 watts from a single 813
grounded grid amp into a doublet made
using 300 ohm twin lead. No problem.
de Joe, aa4nn
- Original Message -
From: Thom LaCosta [EMAIL PROTECTED]
To: Elecraft@mailman.qth.net
Sent: Tuesday, August 14, 2007 7:26 AM
Subject: [Elecraft] Twin Lead
Egg cartons for trays
de Joe, aa4nn
You can get ice cube trays at the Dollar General Storeor other small
plastic containers as well.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
Hello All de Joe, AA4NN, in SC near Charlotte, NC.
I will be one of the foxes Aug 16th along with Dale, WC7S,
calling CQ FOX between 14050 and 14070 from 0100 to
0230 UTC. My listening offset will be 1khz, UP or DN,
from my transmit frequency as I will indicate (UP or DN.)
During the last 30
The IC7000 display would pretty much blank out due
to the sun at Scarborough Reef. The display itself
was not all that attractive to me. I longed for my K2
and wished the K3 could have been there.
de Joe, aa4nn
Not all displays are created equal
You've gotta pay attention. hahahaha
The field checkers have the low serial
numbers, at least up to serial #008.
de Joe, aa4nn
By any chance may I request the first one off the
line, serial number 01?
___
Elecraft mailing list
Post
I asked a wisened ham about voice guys striving for that perfect mic
for the perfect sound and then you see CW guys with a shelf filled
with keys, each key used at different times and why is that, to which
he replied, 'quite simple, one voice, ten fingers.'
de Joe, aa4nn
You guys crack me up
Hello QRPers,
Tonight I am your Crewcut Barber in the contest, running 1 watt from a K2.
from 0100Z to 0130Z I will be around 14.060, SteppIR 4-element lowered to 40ft
from 0130Z to 0230z I will be around 7.030, Force12 2-element lowered to 50ft
from 0230Z to 0229Z I will be around 3.560,
Hello QRPers,
Here is the results of the crew cuts from your QRPp barber running with a
1 watt K2 from Lake Wylie, SC, as K5ESE (aka Joe, aa4nn)
I had my doubts about spending 30 minutes on 20m due to my experience of
late working the 20m Fox Hunts on Thursday evenings. Anyway, there I
Maybe a room on the south side.
The biferglass crappie pole is a good idea.
de Joe, aa4nn
My wife is attending a conference in Chicago in
a couple of weeks and I'm going with. When she booked the hotel, I just
asked that we get a room as high as possible. I'm not sure what we got
yet
Well, now, when is a door not a door?
Of course, when it is a jar.
de Joe, aa4nn
-
The SCG tuner will tune balanced aerial systems but is not AFAIK a
balanced tuner.
___
Elecraft mailing list
Post
It's not the reduction in finger movement that is at stake here,
rather what the keying mode does when you let up on a
closure.
de Joe, aa4nn
For the life of me, I can't see the practical difference. I
understand the difference, but comparing iambic to utlimatic, I see
essentially the same
I also find the Begali Simplex Mono preferable
to the 14 other paddles in my arsenal.
de Joe, aa4nn
If you like the Begali Simplex, you should try
Begali's Simplex Mono. I've used Vibroplex, Bencher, Kent
and several others and now have only a Simplex Mono. Best
single-paddle key I've
it was tricky to hold the dah paddle down
until the timing was completed, otherwise
a zero might come out as a nine.
de Joe, aa4nn
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr
Standing in front of a Zenith like that, you could shake
the change in your pants pocket to make it execute
one of those four functions.
de Joe, aa4nn
Our console Zenith was one of the first ever to have a
4 channel remote. The remote was a small box with
four small tuning forks of differing
I think it means he just placed an order, nothing else.
de Joe, aa4nn
snip ...I just confirmed my order with Lisa Jones - here is
what I placed on order and why. Hope I got it all
right...
I take this to mean that Elecraft are now contacting buyers in the
first production run, and confirming
In stores among kitchen gadget displays you can
find these thin, round rubber pads; the purpose
of which is to assist in opening jar lids. Works
great under a paddle and the diameter is a perfect
match for any paddle's footprint. Colors, too.
de Joe, aa4nn
with short arms makes for
a better high speed paddle. imho
de Joe, aa4nn
the Kent paddle from UK. Is anyone besides me using this paddle (or
used it and went away from it)? Opinions pro/con?
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You
with. Contesting or rag chewing, there's not all
that many knobs one needs to turn, so where's the beef?
My buddy Charles, who I met at VU4, I say go ahead with Orion II.
de Joe, aa4nn
I didn't quite follow you here Charles. What human factor item is the
K3 missing
For super fast contesting I don't see how one
could beat the combination of a QSK amplifier
and a QSK rig. I must be missing something.
de Joe aa4nn
-Original Message-
From: [EMAIL PROTECTED]
Sent: Sep 21, 2007 7:12 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 and QSK
FWIW
Wayne, I find it absolutely amazing that you
and the team are so open to incorporate these
many user's wants and wishes into the K3.
Also the assembly manual is a work of art.
73, Joe, aa4nn
Example: how to select PTT CW vs. Full/Semi QSK
we got the message :)
73,Wayne,N6KR
Do you mean
...closing PTT has no effect because QSK already
has you in transmit mode?
Or while in QSK mode must you closs PTT in order to transmit?
de Joe, aa4nn
This is in addition to the regular semi- and full-QSK modes. AND, if you
are in semi- or full-QSK mode, closing PTT still puts you
Thanks for good explanatiion of PTT in K3.
I would also hope that the K3 carrys
forward the 8R feature built into the K2.
This keys some amps perfectly well.
de Joe, aa4nn
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
That's the way it works on the K2.
No harm in trying it that way.
de Joe, aa4nn
- Original Message -
From: Dave G. [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Sunday, September 30, 2007 10:03 PM
Subject: [Elecraft] KX1 and Straight key
This is a second email... I didn't se
Doesn't happen here.
de Joe, aa4nn
-
What results are these 1-line 700 character
messages, very difficult to read.
Hit the ENTER button guys! Often. Or your
email client, whatever, is messed up.
Fred, de N3CSY
Can't we just drop this Fist business, geesh, folks,
enough is enough. de Joe, aa4nn
Oh, come on. You're really making a mountain out of a molehill here.
If you don't feel comfortable replying to a CQ FISTS call, Keith,
then don't do it. The rest of you please feel free to do so, even
More than that, consider the rig willl need all firmware chips
depending on options, of course. I'd buy a new key myself
and be done with it. $100 saving is not a $100 savings in
this case.
de Joe, aa4nn
Oops forgot the upgrade to firmware needed for the keying mod, that adds
another $44
A complete manual comes with the K3.
After orientation and familiarization
with the rig, it seems to me only a few
pages would be needed for reference,
like pages 49-53 and maybe 5-6. No big
deal to print 7 pages.
GL to all.
de Joe, aa4nn (2nd run factory asmby
The K3 Manual has been flogged.
The RS232 cable has been whipped.
What's next, fellers?
de Joe, aa4nn
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc
I have used the K2 PA Key Out to key the THP HFK1.5, no problem at all and
expect the K3 to have a similar key out feature
de Joe, aa4nn
: [Elecraft] Re: K3 - keying an amp
Still wondering about the TXInhibit feature though and whether (A) it's
a normal feature of most transceivers and (B
Are you psyche, Ed? Did you confirm
with Lisa she was holding K3 #66?
de Joe, aa4nn
-Original Message-
From: Ed K1EP [EMAIL PROTECTED]
I guess many of you were wondering, where in the world did that box end up
that Lisa was holding last Tuesday. I am really surprised that there hasn't
Go to http://www.eham.net/reviews/detail/6673
for K3 reviews.
de Joe, aa4nn
-Original Message-
From: KU4YP [EMAIL PROTECTED]
I have recently finished my K2 and was wanting to hear from the K3 three
owners, prospective and actual, of how they like the rig
for the way Winkey detected a
paddle closure. This is not a problem with the WinkeyUSB keyer.
Begali offers a kit, I think, that will fix the contact problem.
de Joe, aa4nn
From: Vic K2VCO [EMAIL PROTECTED]
If the 'regular' contacts are the same as what was previously supplied
with the various
No one disagrees with Elecraft priorities and the want for a quality product.
The issue was
and remains to be the want for more information about what's happening at Aptos
and the
seemingly unpredictable delivery schedules.
de Joe, aa4nn
a minute. Does the act of putting in a specific filter tell DSP
what compensation to do OR must we dumb operators try to
guess at what compensation number to enter? And how would
that number be entered?
de Joe , aa4nn
___
Elecraft mailing list
Post
and a quite difficult
one at that.
de Joe, aa4nn
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
of the internals of any radio. It could be crystal filters
versus
DSP filters, single conversion versus n conversions. I like 500Hz filters
in pileups where the K2 gives clean signals and IC7000 gives not so clean.
de Joe, aa4nn
On Mon, 2007-11-05 at 12:57 -0500, Joe-aa4nn wrote:
David Pratt
Yeah, Dave, you have too much time on your hands.
de Joe, aa4nn
- Original Message -
From: David Yarnes [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Tuesday, November 13, 2007 5:58 PM
Subject: [Elecraft] Ode To My Phantom K3
I'm awfully wound up and in deepest distress
When
feedline and
give it another go.
You don't want to connect balanced line directly to KAT2.
73 gl,
de Joe, aa4nn
- Original Message -
From: Peter Wollan [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Friday, November 16, 2007 9:50 AM
Subject: [Elecraft] Re: KAT100 with Ladder Line
are in business.
With the phased verticals you can selectively switch for end fire
in either direction in line with the verticals, plus you can switch
select to transmit broadside to the two elements. Amazing results.
Excellent front-to-back as well.
de Joe, aa4nn
- Original Message -
From
wire. Use a band saw, scroll
saw or hand held saber saw. After inserting the wire in the PVC,
put a dab of Marine Glue and Sealant on there, or other quick drying
adhesive.
de Joe, aa4nn
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You
Their statment should steer you clear away from
considering the Plantronics Gamecon headset.
de Joe, aa4nn
SNIP
The .Audio 350 is a modern equivalent to the old GameCom 1; the two
headsets have comparable specifications however neither of these products
are radio headsets. We do not rate our
You'll need the K2/100, of course.
Then you key the amp with the PA Key out (RCA Jack)
connection on the rear panel of the KPA100. Easy.
de Joe, aa4nn
- Original Message -
From: William Langford [EMAIL PROTECTED]
If I build the K2, how could I key my Ameritron ALS-600 amp?
Is anyone
I suppose when I had the Ngen connected to the QRP K2
and accidentally pushed the MSG button causing some CW
to be sent means I fried the Ngen circuit. no?
de Joe, aa4nn
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
While I like my Edsyn 951SX bought on special sale, now a bit pricey,
I think most Weller or Hakko are excellent.
Eg., Hakko model 936-11 is $89.98 at Tequipment
de Joe, aa4nn
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
1 - 100 of 160 matches
Mail list logo