ck, W6FB
Elecraft Engineering
> On Dec 30, 2018, at 1:55 PM, Ken B via Elecraft
> wrote:
>
> Thanks for the suggestion
> Sorry for the delay the wife and I went out. The only way I can get it all to
> work properly is to:- Remove AC power from the AMP (simply turning i
u should then be "good to go" with the basic cabling. When you get
> the proper cable, it will integrate better with your Icom, but the
> basic
> cabling will get you on the air with your new toys.
>
> 73,
> Don W3FPR
>
> On 12/27/2018 11:14 PM, Ken B vi
et
the proper cable, it will integrate better with your Icom, but the basic
cabling will get you on the air with your new toys.
73,
Don W3FPR
On 12/27/2018 11:14 PM, Ken B via Elecraft wrote:
> Just received my the kap500 and found out it was missing the accessory cable
> which goes from t
ly.
73!
Jack, W6FB
Elecraft Engineering
> On Dec 30, 2018, at 1:55 PM, Ken B via Elecraft
> wrote:
>
> Thanks for the suggestion
> Sorry for the delay the wife and I went out. The only way I can get it all to
> work properly is to:- Remove AC power from the AMP (simply t
the cables/connections going to the KPA500 (and from where). While you are
at it you might as well do the same for the KAT500. I’ll try to decipher what
is going on from this information and hopefully get a good solution for you
quickly.
73!
Jack, W6FB
Elecraft Engineering
> On Dec 30,
on from this information and hopefully get a good solution for you
quickly.
73!
Jack, W6FB
Elecraft Engineering
> On Dec 30, 2018, at 1:55 PM, Ken B via Elecraft
> wrote:
>
> Thanks for the suggestion
> Sorry for the delay the wife and I went out. The only way I can get it al
I am completely satisifed with anything shipped from Elecraft.
Sent from Yahoo Mail on
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Rose
Sent: Wednesday, January 2, 2019 9:41 AM
To: Elecraft Reflector
Subject: [Elecraft] OT: USPS mailing
I've been making
Good evening all
I am truly amazed at the quality of Customer Service I just received. It takes
a lot to impress me, Doug and crew did a fantastic job helping to trouble shoot
a potential newby configuration issue. The Disney company does fantastic
customer service trainings for all their
Just received my the kap500 and found out it was missing the accessory cable
which goes from the icom 7600 to the kat500. Elecraft is sending one but it
might take a week. In the mean time does anyone have the accessory pin outs to
rca plug so i can make one and use my new toy.
Thank
/30/2018 4:13 PM, Ken B via Elecraft wrote:
> Good evening The Icom IC-7600 KAT500, and KPA500 are each grounded to a
> single terminal strip with a #10 cable directly to a ground rod 15 ft away.
> The rod is 12 ft deep. Both the KAP and KTA were factory built as my
> soldering
e KAT500. I’ll try to decipher what
is going on from this information and hopefully get a good solution for you
quickly.
73!
Jack, W6FB
Elecraft Engineering
> On Dec 30, 2018, at 1:55 PM, Ken B via Elecraft
> wrote:
>
> Thanks for the suggestion
> Sorry for the delay the wife
> needs to tune.
> >
> > You should then be "good to go" with the basic cabling. When
> you get
> > the proper cable, it will integrate better with your Icom,
> but the
> > basic
> > cabling will get you on the air w
what
is going on from this information and hopefully get a good solution for you
quickly.
73!
Jack, W6FB
Elecraft Engineering
> On Dec 30, 2018, at 1:55 PM, Ken B via Elecraft
> wrote:
>
> Thanks for the suggestion
> Sorry for the delay the wife and I went out. The only way I
or you
quickly.
73!
Jack, W6FB
Elecraft Engineering
> On Dec 30, 2018, at 1:55 PM, Ken B via Elecraft
> wrote:
>
> Thanks for the suggestion
> Sorry for the delay the wife and I went out. The only way I can get it all to
> work properly is to:- Remove AC power from t
I have 2 Astrons and they are great supplies. On both replaced the caps and all
was very quiet
Ken WB8PKK
Sent from Yahoo Mail on Android
On Mon, Feb 25, 2019 at 8:04 PM, h...@optilink.us wrote:
Filter caps bad? AC on the DC supply side maybe? A well made linear supply
does not make
t;> On 10/3/2019 5:25 PM, Ken B via Elecraft wrote:
>> Now to somehow convince the CFO and chief cookie counter
>
> Get her interested in sewing machines or looms. I NEVER have to ask my XYL
> about buying
Dear Santa a Christmas package would be oh so nice. Even if it required
several firmware updates after
Sent from Yahoo Mail on Android
On Thu, Nov 21, 2019 at 3:16 PM, Tox wrote: Eric
also presented on it at Pacificon a month ago. While I would love
some good news tonight, I'm kinda
I have been really really good this year, you can even ask the smart one of the
family. Will there be a K4 gift under the tree
Thanks sad looking puppy dog eyes Ken. WB8PKK
__
Elecraft mailing list
Home:
A personal account
I did up front pay for a K4 based on the customer service, quality, and a
recommendation of N1MGO. This type of attention to detail and service is
unheard of these days
Ken. WB8PKK
Sent from Yahoo Mail on Android
On Wed, Dec 11, 2019 at 3:09 PM, Joseph Street wrote:
Any update on delivery dates
Thank you Ken WB8PKK
Sent from Yahoo Mail on Android
On Thu, Oct 17, 2019 at 11:32 PM, Eric Swartz WA6HHQ -
Elecraft wrote: Hi Tom,
I apologize for any confusion on K4 status. We really appreciate the support
you and others have given us with your K4
I just had an excellent call with Bruce from Elecraft service. While
discussing the issue with my KPA500 we also drifted into the K4.
That sounds like the perfect radio for myself. Now to somehow convince the CFO
and chief cookie counter
My Prediction
Eric will mention that all prepaid K4's have been shipped.
Ken WB8PKK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
If this posting is not allowed please feel free to delete it.
Our local club has been asked to present an introduction to ham radio for a
couple of local youth organizations. We are planning a number of hands on
activities and need help with people talking back to the kids. It would be
great
Anxiously awaiting it. There was promises of more and frequent conversation
unless I am mistaken. I paid for it in full and am not going to cancel it but
would like more information
Thank youWB8PKK
Sent from Yahoo Mail on Android
On Sun, Apr 19, 2020 at 1:09 PM, Doug Turnbull wrote:
Good evening
Quick Q - is there a rough ETA when the VHF module will be ready for the K4.
Thank you Ken WB8PKK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
50 lashes with a wet noodle to the person sitting in the big chair. You
missed WB8PKK
Sent from Yahoo Mail on Android
On Mon, May 11, 2020 at 11:39 AM, Steve Hall<99sun...@gmail.com> wrote:
Thanks to all that participated and those relaying.
We meet each Sunday at 1800Z, 7280 KHz.
WM6P
Good afternoon Eric
Wayne mentioned there would be an update on shipping of the fully paid units.
Would you be able top please give a "cracked Crystal Ball" estimate to the USA?
Thank you Ken WB8PKK
__
Elecraft mailing list
Home:
Good afternoon - Did anything get posted
On Thursday, October 8, 2020, 02:18:57 PM EDT, Tom Doligalski via Elecraft
wrote:
Just got off the phone with Eric. The K4 is steadily shipping, and they are
working diligently to get through the huge numbers of orders.The company is in
Why do you use red and not blue or green
Sent from Yahoo Mail on Android
On Fri, Oct 16, 2020 at 9:18 AM, Rich NE1EE<73.de.ne...@gmail.com> wrote: I
just looked at my keychain light. Says Night Reader by David Chandler Company
I am thinking of recessing some LEDs in the table in front of the equipment
for low light operation and trying to decide what color would be best.
Thank you Ken WB8PKK
On Friday, October 16, 2020, 10:18:48 AM EDT, Rich NE1EE
<73.de.ne...@gmail.com> wrote:
Another way to roll your own
I as well have a K4 on deposit and think a "get it working" 5-10 page
instruction would be really nice, as well as a searchable complete manual.
Guessing youtube videos will come with time just as it did on the K3. Can
hardly wait for the K4 - maybe a surprise under the tree.
Thank you Ken
Totally agree.
Sent from Yahoo Mail on Android
On Fri, Jul 31, 2020 at 11:55 AM, Paul Gacek via
Elecraft wrote: Maybe but I have to imagine that
the recent past has been rough and tough for Elecraft on many fronts.
I for one will be thrilled just to receive my K4 and happy to pay the
What meeting on Friday ?
On Wednesday, January 13, 2021, 05:47:36 PM EST, Paul Van Dyke
wrote:
I would say that is a question for the Zoom meeting Friday
Paul Van Dyke KB9AVO
On Wed, Jan 13, 2021 at 11:55 AM w4sc wrote:
> Has estimated date of K4HD availability been revealed?
week. The 22nd.
Grant NQ5T
Sent from my iPhone
> On Jan 13, 2021, at 6:50 PM, Ken B via Elecraft
> wrote:
>
> What meeting on Friday ?
>
> On Wednesday, January 13, 2021, 05:47:36 PM EST, Paul Van Dyke
> wrote:
>
> I would say that is a question for the Zo
Wayne can you please reshare the news letter. My old eyes appear to have
missed it
Thanks Ken
Sent from Yahoo Mail on Android
On Mon, Jan 18, 2021 at 11:58 AM, Wayne Burdick wrote:
Either I post here or start a blog :)
(Seriously, as fun distractions go, I vote for our newsletter
Following with great interest - as have a similar issue
On Tuesday, January 26, 2021, 11:24:41 AM EST, Joseph Shuman via Elecraft
wrote:
I have severe high-frequency hearing loss, up to 85 dB at 6-8KHz and 60 dB at
3-4KHz. Lower than that my hearing is close to normal for my age. I
Anyone have a SP3 they would like to sell?
Thanks
Ken WB8PKK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
Its affecting everything - Tried to by a bunch of 555 timing chips for the
local troops scouting project - none around, glad we don't need them till
November.
On Thursday, April 29, 2021, 04:50:57 PM EDT, Wayne Burdick
wrote:
Many off-the-shelf parts are affected as well.
Wayne
Well you have not been to Hell Michigan. I can 100% confirm it freezes over
yearly
Sent from Yahoo Mail on Android
On Mon, Oct 4, 2021 at 7:10 PM, jerry wrote: On 2021-10-04
15:12, Skip Jensen wrote:
> I would put an LiPoly inside one of my radios right after it has been
> reliably
No thanks. Far worse than Hell MI.
Sent from Yahoo Mail on Android
On Mon, Oct 4, 2021 at 7:53 PM, Skip Jensen wrote:No,
I have not been to Hell MI, although I did do a year remote in the northern
interior of AK at the Arctic Circle while in the Air Force. Froze there from
early
Waiting for Elecraft to finally get they supply of Kyber Crystal's. Cannot
wait to see Wayne demonstrating the mini light Saber at Dayton this year. Will
finally be able to remotely eliminate the equipment of the "tuner uppers"
during nets.
Way to go Master council member Madolyn, masters
I had a KPA500 issue 5 months after purchase. I took out the coil (the heavy
part) and paid for shipping back to the mother ship. They fixed it really fast
and sent back at no charge. Could not be more pleased with their service.
On Monday, August 1, 2022 at 03:52:30 PM EDT, wrote:
42 matches
Mail list logo
