Hi guys:
I have, over the past few weeks, built a K3, fairly fully loaded, a P3, KAT500,
KRC2ACC and a KPA500.
I now find myself a bit flummoxed as I try to cable them all together. I have
one of the special 15 pin cables, KPAK3AUX plus a Y-Cable, and I have ordered a
second.
Can anyone
...@nf8j.com wrote:
Brian:
I think you will find most of what you r looking for hereand the
K3/0 is available now I think...
http://www.elecraft.com/K3-Remote/k3_remote.htm
NF8J
Paul
On Mon, Jul 1, 2013 at 9:07 PM, bwru...@gmail.com bwru...@gmail.com wrote:
Hi guys
On Mon, Jul 1, 2013 at 9:07 PM, bwru...@gmail.com bwru...@gmail.com wrote:
Hi guys:
I have, over the past few weeks, built a K3, fairly fully loaded, a P3,
KAT500, KRC2ACC and a KPA500.
I now find myself a bit flummoxed as I try to cable them all together. I
have one of the special 15 pin
Tnx, Fred. I got it working by setting the KAT500 back to factory defaults. I
will look at the coding.
Brian
--
70 is the new 40.
Brian F. Wruble, C.F.A.
1107 Key Plaza, PMB 447 Key West, FL 33040
Summers: P.O.Box 57, 7400 Augustine Herman Highway, Georgetown, MD 21930
eFax
Brandon gave me about an hour on the phone, and we got all the settings just
right. I can now operate remotely using RemoteRig and the K3/0 to my K3/100.
It works --- with a couple of quirks.
Quirk 1--- if you use the Heil ProSet Elite iC (made specially for Icom,) the
jumper JMP1 in the
WB6MID/8R3
--
70 is the new 40.
Brian F. Wruble, C.F.A.
1107 Key Plaza, PMB 447 Key West, FL 33040
Summers: P.O.Box 57, 7400 Augustine Herman Highway, Georgetown, MD 21930
eFax 305.768.0278 Skype bwruble
On Aug 23, 2013, at 7:06 PM, Ken G Kopp kengk...@gmail.com wrote:
Jim
the same.
73,
/Rick
On Mon, Sep 30, 2013 at 11:16 AM, Brian F. Wruble bwru...@gmail.com wrote:
Hi all:
I have my remote gear all working extremely well. I can set up the control
end as close as the same LAN as the radio end, or as far as 110 miles away,
and the results
Any idea when the mini will become available?
73 de Brian W3BW
--
70 is the new 40.
Brian F. Wruble, C.F.A.
1107 Key Plaza, PMB 447 Key West, FL 33040
Summers: P.O.Box 57, 7400 Augustine Herman Highway, Georgetown, MD 21930
eFax 305.768.0278 Skype bwruble
Hi all. I could use some advice. I have spent the last several months
building the complete K-Line for my MD summer QTH. I am now preparing to
operate via RemoteRig from a K3/0 located remotely. I was hoping for a test
run in Sweepstakes this weekend.
Everything was working fine, and
Hello all,
I have got my K3/0 here in Key West beautifully controlling my K3/100 + KPA500
+ KAT500 located at my big station in MD.
I cannot figure out how to get CW keying using N1MM or Writelog. Can someone
guide me through the hookup? I am able to read frequencies from the K3/0
using
Herman Highway, Georgetown, MD 21930
eFax 305.768.0278 Skype bwruble
Begin forwarded message:
From: Brian F. Wruble bwru...@gmail.com
Date: December 18, 2013 at 6:13:28 PM EST
To: Elecraft Reflector elecraft@mailman.qth.net
Subject: K3/0 to K3 RemoteRig issue
Reply-To: bwru
It works. No idea why, but this morning everything is good, though I still
can't ping my MD address from inside my FL network.
Begin forwarded message:
From: bwru...@gmail.com bwru...@gmail.com
Date: December 19, 2013 at 9:27:04 AM EST
To: Elecraft Reflector elecraft@mailman.qth.net
to respond to ping request.
73, Michael - N8NOC
K1-4 #3046
K3/10 #6596
KX3#1573
On Dec 19, 2013, at 9:45 AM, bwru...@gmail.com wrote:
It works. No idea why, but this morning everything is good, though I still
can't ping my MD address from inside my FL network.
Begin
Thanks a lot guys. Both of these explanations are excellent.
I have been messing with routers for years, as we live in places that have
complicated and multiple structures. I learned a lot from having to daisy-chain
routers to get my wifi signals to cover a variety of places. We left New
That is great. I will do it as soon as I get another router.
Query: what router brands and models have folks had the most success with ---
especially freedom from failure?
Thanks so much, Chris!
73 de Brian
--
70 is the new 40.
Brian F. Wruble, C.F.A.
1107 Key Plaza, PMB 447 Key West, FL
At the moment, I am using logmein.com, a free program for remotely controlling
a pc I left running at the remote location (with a backup battery.) I log on
and use Green Heron software to control a Green Heron rotor box. It is slow
and clumsy.
Option 1, which inexplicably failed, was an
I am trying to operate AFSK modes remotely using K3/0 to K3 and RemoteRig. I
have stereo cables running from line in/out on the back of the K3/0 to my PC
sound card. I am getting no audio from the K3/0 to the PC. If I connect to
the front panel headphone jack, I do get audio.
Is there a
(www.remoterig.com). Sorry I didn't make that clear.
73, Doug VE3MV
- Original Message - From: iain macdonnell - N6ML a...@dseven.org
To: D Joyce d_jo...@sympatico.ca
Cc: bwru...@gmail.com; Elecraft Reflector elecraft@mailman.qth.net
Sent: Sunday, May 19, 2013 12:42 PM
Subject: Re
- N6ML a...@dseven.org
To: D Joyce d_jo...@sympatico.ca
Cc: bwru...@gmail.com; Elecraft Reflector elecraft@mailman.qth.net
Sent: Sunday, May 19, 2013 12:42 PM
Subject: Re: [Elecraft] K3/0 Question
I'm fairly sure that the K3/0 will NOT power off a remote K3. It
certainly won't power
Thanks. That is not the answer, but please keep thinking!
It worked once, and I have obviously set something wrong.
Brian
--
70 is the new 40.
Brian F. Wruble, C.F.A.
1107 Key Plaza, PMB 447 Key West, FL 33040
Summers: P.O.Box 57, 7400 Augustine Herman Highway, Georgetown, MD 21930
, MD 21930
eFax 305.768.0278 Skype bwruble
Begin forwarded message:
From: Brian F. Wruble bwru...@gmail.com
Date: May 26, 2013, 1:05:02 PM EDT
To: Elecraft Reflector elecraft@mailman.qth.net, supp...@elecraft.com
Subject: K3 S/N 7394 RF Out = 0 Problem
Reply-To: bwru...@gmail.com
I am just starting to assemble a KRC2. In doing the parts inventory, I found
my 70 year-old eyes really struggling to identify components. Magnifying
glasses, of which I have several, just weren't cutting it.
It hit me that perhaps my iPhone and/or iPad might have an app available to do
There are no distinguishing marks or differences in pin cross-section.
However, my VOM shows that one end, which I have declared to be pin 1, measures
47K ohms to every other pin.
I probably should have been smart enough to work that out myself.
Thanks for your help!
73 de Brian
--
70
Thanks. It was VE3AYR who publishes these.
I am all set. No more needed, 73 de Brian W3BW
--
70 is the new 40.
Brian F. Wruble, C.F.A.
1107 Key Plaza, PMB 447 Key West, FL 33040
Summers: P.O.Box 57, 7400 Augustine Herman Highway, Georgetown, MD 21930
eFax 305.768.0278 Skype bwruble
Tnx. I will order a new one!
Brian F. Wruble, C.F.A.
From my iPad
On Jun 20, 2014, at 1:48 PM, Don Wilhelm w3...@embarqmail.com wrote:
Brian,
The best way to attack a KRC2 that has been subjected to a strong lightning
surge is to replace all the ICs (and possibly other active
?
Milt, N5IA
-Original Message- From: Mitch Wolfson DJØQN
Sent: Wednesday, June 25, 2014 3:57 PM
To: bwru...@gmail.com ; Elecraft Reflector
Subject: Re: [Elecraft] RemoteRig WiFi Puzzler
Brian,
You should ask this question on the RemoteRig forum, where the
developers monitor
I got my copper here:
http://www.electrical-insulators-and-copper-ground-bars.com/
But I got a number of great recommendations, and almost instantly --- Shazam!
Thanks to all.
73,
Brian W3BW
Brian F. Wruble, C.F.A.
From my iPad
Hi guys:
Last year, I had wonderful success controlling my big station (K3,
KPA500,KAT500) on Maryland's Eastern Shore from our winter home in Key West.
When I took the setup down last May, I carefully documented every step required
to set things back up.
Well, I have just gone through that
and make sure no dust is there.
I had a very similar problem and it turned out to be a little dust!
73 de Jim - KE8G
Sent from my iPad
On Oct 3, 2014, at 10:00 PM, bwru...@gmail.com bwru...@gmail.com wrote:
Hi guys:
Last year, I had wonderful success controlling my big station (K3
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to bwru...@gmail.com
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to bwru...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
://www.qsl.net/donate.html
Message delivered to bwru...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to bwru...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
33 matches
Mail list logo