Brown
Sent: Saturday, October 17, 2015 9:59 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Popping noise in headphones??
On Fri,10/16/2015 11:15 PM, Jim Bolit wrote:
> The popping is present as I rotate the BW control back to wider bandwidths
also, but the popping stops once above
I vaguely recall reading a post that at narrow CW bandwidths the RX EQ
is turned off automatically.
That can result in a pop as bandwidth is changed if RX EQ is not flat
near the chosen sidetone pitch, with the severity of the pop depending
on your RX EQ settings.
This predated the new synth,
y, October 18, 2015 11:41 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Popping noise in headphones??
Well, I have an old K3 plus new synths, I have the RX EQ set to zero dB all
across its range, and I hear the noises. I would call them short tone bursts
rather than pops, though.
73,
Thanks for the detailed explanation. I was beginning to wonder when and
if someone would advance a valid explanation.
73
Bob, K4TAX
K3S s/n 10163
On 10/18/2015 1:16 PM, Joe Subich, W4TV wrote:
There will be a slight pop when changing bandwidth between 150 and 100
Hz as the K3/K3S disables
Subject: Re: [Elecraft] K3 Popping noise in headphones??
On 10/18/2015 11:46 AM, Wes (N7WS) wrote:
> As a point of reference, my old K3 with the original synthesizer board
> pops when changing BW. It's most noticeable going from 150 Hz to 100
> Hz and vice versa.
There will be a slight
The selection of IIR versus FIR filtering for the narrowest bandwidths
(50 Hz and 100 Hz) may also have some effect on this.
In general, the K3 and K3S switch to a different filtering algorithm for
these two bandwidths. The loading of coefficients and filter settling
time -- and to some
I don't use any RXEQ and my pitch is usually between 400 and 450 Hz. Yes,
100->150 is "worse", although not particularly objectionable; a curiosity
actually. But there are other pops too, 750->800 is about the same and there is
also a dependence upon the shift.
On 10/18/2015 11:16 AM, Joe
Well, I have an old K3 plus new synths, I have the RX EQ set to zero dB
all across its range, and I hear the noises. I would call them short
tone bursts rather than pops, though.
73,
Vic, 4X6GP/K2VCO
Rehovot, Israel
http://www.qsl.net/k2vco/
On 18 Oct 2015 21:16, Joe Subich, W4TV wrote:
On
The clicks are there regardless of the level of the AF gain setting. The
loudness of the clicks is affected by the AF gain setting, but they are
still there.
I'm using a Yamaha CM500 headset.
It is the strongest when moving between the 0.10 and 0.15 bandwidth
setting, but also occurs going
Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim
Brown
Sent: Saturday, October 17, 2015 10:47 PM
To: Reflector Elecraft
Subject: Re: [Elecraft] K3 Popping noise in headphones??
On Sat,10/17/2015 11:58 AM, jim wrote:
> I sent the rig in to Elecraft for upgrades AND to see if they co
As a point of reference, my old K3 with the original synthesizer board pops when
changing BW. It's most noticeable going from 150 Hz to 100 Hz and vice versa.
This is with normal AF gain and CM500 in rear headphone jack.
On 10/16/2015 6:01 PM, jim wrote:
I just got my K3 back from Elecraft.
#311, #1435
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bert
via Elecraft
Sent: Saturday, October 17, 2015 10:18 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Popping noise in headphones??
I can verify that I get the popping (more like
...@mailman.qth.net] On Behalf Of
Anthony Scandurra
Sent: Sunday, October 18, 2015 6:47 AM
To: j...@audiosystemsgroup.com
Cc: Reflector Elecraft
Subject: Re: [Elecraft] K3 Popping noise in headphones??
The clicks are there regardless of the level of the AF gain setting. The
loudness of the clicks
On 10/18/2015 11:46 AM, Wes (N7WS) wrote:
As a point of reference, my old K3 with the original synthesizer
board pops when changing BW. It's most noticeable going from 150 Hz
to 100 Hz and vice versa.
There will be a slight pop when changing bandwidth between 150 and 100
Hz as the K3/K3S
No notch filter (auto or otherwise) is engaged.
Jim
W6AIM
.
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
riese-k3...@juno.com
Sent: Saturday, October 17, 2015 12:33 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Popping noise
I can verify that I get the popping (more like a click) and it's loudest
between 150 and 100 Hz transition. It doesn't bother me. My K3 is S/N 1326
and I have the new synth installed.
Bert, N4CW
__
Elecraft mailing list
Home:
On Sat,10/17/2015 11:58 AM, jim wrote:
I sent the rig in to Elecraft for upgrades AND to see if they could sort out
the constant hiss (with the AF gain fully counter clockwise) that I heard in
the Bose headphones with them set at "hi" sensitivity.
Putting on my audio engineer's hat, THAT'S the
l.com>
Date: 10/16/2015 10:42 PM (GMT-08:00)
To: jim <jbol...@outlook.com>
Cc: "<elecraft@mailman.qth.net>" <elecraft@mailman.qth.net>
Subject: Re: [Elecraft] K3 Popping noise in headphones??
Yes, I have it too, and I didn't notice it before installing the new synths.
On Fri,10/16/2015 11:15 PM, Jim Bolit wrote:
The popping is present as I rotate the BW control back to wider bandwidths
also, but the popping stops once above 200 Hz bandwidth.
Hi Jim,
I also do a lot of digging for weak signals, but I rarely go narrower
than 200 Hz because I find the
t; <elecraft@mailman.qth.net>
Subject: Re: [Elecraft] K3 Popping noise in headphones??
I use the BW control a lot as most of my work is weak signal CW.
There was no popping before, and my ears are "on max gain" with weak
signals, that are at or near the noise floor. The popping is VERY ann
net> <elecraft@mailman.qth.net>
> Subject: Re: [Elecraft] K3 Popping noise in headphones??
>
> I use the BW control a lot as most of my work is weak signal CW.
> There was no popping before, and my ears are "on max gain" with weak
> signals, that are at or near the noi
Hi Jim,
I have an older K3 with new SYN boards. I also have the 500Hz and 200Hz
filter. I just tested it on CW and I can hear a very faint pop when turning
the bandwidth knob. As you noted, it seems to be present only at the narrow
settings. I start to hear it when changing from 350 to 300 and
an.qth.net
Subject: Re: [Elecraft] K3 Popping noise in headphones??
On Fri,10/16/2015 11:15 PM, Jim Bolit wrote:
> The popping is present as I rotate the BW control back to wider bandwidths
also, but the popping stops once above 200 Hz bandwidth.
Hi Jim,
I also do a lot of digging for weak signals,
the only time I notice that issue is if I have the auto notch set
and tune around the band,, I just turn off auto notch and
it clears up ??
Bob K3DJC
On Sat, 17 Oct 2015 09:59:21 -0700 Jim Brown
writes:
> On Fri,10/16/2015 11:15 PM, Jim Bolit wrote:
> > The popping
I just got my K3 back from Elecraft. They did the once over and installed
the new SYN boards.
I have noticed a "popping" noise in the headphones as I change the bandwidth
control, but ONLY as I transition from 200 Hz, 150 Hz, 100 Hz and 50 Hz. I
have only checked this in the CW mode.
Yes, I have it too, and I didn't notice it before installing the new synths.
Doesn't bother me.
Vic
Sent from my phone
> On Oct 17, 2015, at 4:01 AM, jim wrote:
>
> I just got my K3 back from Elecraft. They did the once over and installed
> the new SYN boards.
>
>
>
26 matches
Mail list logo