[Elecraft] K3 and PR6 question

Hello to the group. I must be missing something in the manual... If I use the K3 (and 2nd receiver) with the radio TX on the main, but RX on the sub receiver that is connected to the antenna via the BNC RX antenna (with the SUB indicated on the display) is the PR6 pre-amp in line with the sub

Re: [Elecraft] K3 and PR6 question

Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Andy GD0TEP Sent: Thursday, April 02, 2009 5:57 AM To: elecraft@mailman.qth.net Subject: [Elecraft] K3 and PR6 question Hello to the group. I must be missing something in the manual... If I use

Re: [Elecraft] K3 and PR6 question

OK Bud, that answers that question then... thanks. 73 Andy http://www.gd0tep.com -Original Message- From: Bud Semon N7CW [mailto:n...@cableone.net] Sent: 02 April 2009 14:57 To: 'Andy GD0TEP'; elecraft@mailman.qth.net Subject: RE: [Elecraft] K3 and PR6 question Hi Andy

Re: [Elecraft] K3 and PR6 question

GD0TEP'; elecraft@mailman.qth.net Subject: RE: [Elecraft] K3 and PR6 question Hi Andy, There was a fairly long discussion between Wayne, W0MU and myself on this subject, mostly on the reflector. The answer was no - you can't use the PR6 (as installed on the radio) inline on the 2nd receiver

Re: [Elecraft] K3 and PR6 question

April 2009 15:45 To: elecraft@mailman.qth.net; 'Andy GD0TEP' Subject: Re: [Elecraft] K3 and PR6 question I suppose if you REALLY wanted to do this you could use a second PR6 and run your RX ant to the PR6 input and the output connected to the AUX RF connector if its installed and KRX3 set

Re: [Elecraft] K3 and PR6 question

To: elecraft@mailman.qth.net; 'Andy GD0TEP' Subject: Re: [Elecraft] K3 and PR6 question I suppose if you REALLY wanted to do this you could use a second PR6 and run your RX ant to the PR6 input and the output connected to the AUX RF connector if its installed and KRX3 set to BNC. Then usinging

Re: [Elecraft] K3 and PR6 question

OK Greg, I'll be trying this tonight when I'm at the shack. 73 Andy http://www.gd0tep.com -Original Message- From: Greg - AB7R [mailto:a...@cablespeed.com] Sent: 02 April 2009 16:21 To: 'Andy GD0TEP' Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 and PR6 question Yes, that I

Re: [Elecraft] K3 and PR6 question

But you can use the PR6 in-line between a 6-m receiving antenna and the sub's AUX RF input if you switch it in/out with an external signal. 73, Wayne N6KR On Apr 2, 2009, at 6:56 AM, Bud Semon N7CW wrote: Hi Andy, There was a fairly long discussion between Wayne, W0MU and myself on this

[Elecraft] K3 and PR6 question

I use a 1/4-wave 6M GP connected to (only) the 2nd receiver's antenna input via the added BNC antenna connector. This lets me listen for activity and if the band opens I can then switch the radio to the main 6M antenna that's connected to the ANT 2 connector. The PR6 is then available via the

Re: [Elecraft] K3 and PR6 question

] Sent: 02 April 2009 15:45 To: elecraft@mailman.qth.net; 'Andy GD0TEP' Subject: Re: [Elecraft] K3 and PR6 question I suppose if you REALLY wanted to do this you could use a second PR6 and run your RX ant to the PR6 input and the output connected to the AUX RF connector if its installed

Re: [Elecraft] K3 and PR6 question

receiver. Thanks Eric. 73 Andy http://www.gd0tep.com -Original Message- From: Eric Swartz - WA6HHQ, Elecraft [mailto:e...@elecraft.com] Sent: 02 April 2009 18:19 To: a...@cablespeed.com Cc: 'Andy GD0TEP'; elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 and PR6 question I do not find