Re: [Elecraft] ATU TUNE does not work in DATA A Split mode

Apparently I forgot to quote the original message I was replying to.  It happens in Data mode only on 6 meters.  It does it with both VFOs on the same frequency (i.e. 50.276) or with one VFO a few kHz away, both VFOs in Data mode.  I probably would have never noticed it had it not been for

Re: [Elecraft] ATU TUNE does not work in DATA A Split mode

What mode and frequency on VFO B AND VFO A when this occurs? Sent from my iPhone ...nr4c. bill > On Nov 16, 2017, at 3:50 AM, Michael Eberle wrote: > > Was this issue ever resolved? I have noticed the same thing with mine > although the issue does not appear to be the

Re: [Elecraft] ATU TUNE does not work in DATA A Split mode

Was this issue ever resolved? I have noticed the same thing with mine although the issue does not appear to be the tuner itself, but the K3 is not transmitting any power so the tuner has nothing to work with. I am running FW version 5.60 an have this issue but only on 6 Meters. I can power up

Re: [Elecraft] ATU TUNE does not work in DATA A Split mode

You need to make sure both VFO A B are in the same mode, else you will get N/A. Ken K3IU Steve Ellington wrote: How are you getting split in data A? When I push SPLIT I get SPL N/A. Steve N4LQ n...@carolina.rr.com - Original Message - From: Chuck - AE4CW ae...@att.net To:

[Elecraft] ATU TUNE does not work in DATA A Split mode

Has anyone noticed that ATU TUNE does not work (properly) when in DATA A Split mode? The relays clatter for about three seconds but no RF is produced and no SWR reading is resolved. If I drop Split, ATU TUNE works fine. I'd appreciate if someone else could verify if their K3 is behaving the

Re: [Elecraft] ATU TUNE does not work in DATA A Split mode

I can confirm this behavior. In Data A mode split, no (or very, very little) rf out. Exit split mode and get ~5w during tune. Also, when the TUNE (not atu tune) button is pressed, the display which normally shows swr displays -- and power reads 0.0. When you hit the tune button again to

Re: [Elecraft] ATU TUNE does not work in DATA A Split mode

Chuck - AE4CW wrote: Has anyone noticed that ATU TUNE does not work (properly) when in DATA A Split mode? The relays clatter for about three seconds but no RF is produced and no SWR reading is resolved. If I drop Split, ATU TUNE works fine. I'd appreciate if someone else could verify if

Re: [Elecraft] ATU TUNE does not work in DATA A Split mode

How are you getting split in data A? When I push SPLIT I get SPL N/A. Steve N4LQ n...@carolina.rr.com - Original Message - From: Chuck - AE4CW ae...@att.net To: elecraft@mailman.qth.net Sent: Wednesday, October 07, 2009 9:30 PM Subject: [Elecraft] ATU TUNE does not work in DATA A Split