On 22/11/17 23:27, elecraft-requ...@mailman.qth.net wrote:
> Date: Tue, 21 Nov 2017 21:54:31 -0500
> From: "Elmore's"
> To:
> Subject: [Elecraft] FLDIGI on Raspberry Pi PTT issue with the K2
> Message-ID:
> Content-Type: text/plain; charset="utf-8
Hi Jim,
I don't think this is a serial port issue any more. Why do I think that?
Because you said that fldigi does read the frequency, the mode, and the
filter width. You also said that wsjtx, via hamlib, also controls the rig
(ptt as well) via the same hardware setup. I assume you can change t
Jim -
For what it’s worth……… I run a KX3 with an RPI3. I have FLDIGI and WSJT-X. I
use HAMLIB. I’m also using the same Elecraft USB—>Serial cable. It “used” to
work quite well - both could receive/transmit/and control the radio. I use VOX
to make the radio squeal. Somewhere along the line, some
Please carefully read everything that follows to avoid repetition of the steps
followed. What I have summarized here is the result of MANY hours of work and
extensive troubleshooting time via email with 2 incredibly helpful and patient
hams.
I have an RPi 3 with FLDIGI and WSJT-X installed.
Af
4 matches
Mail list logo
