Thanks to Rich, VE3KI, I got the Windows 10 privacy settings fixed to
where WSJT-X and MMTTY can now access the K3S internal sound card.
Turns out Microsoft forced a huge upgrade on all their users but never
adequately explained that they shut off access to some things for
"privacy" reasons.
A recent update to Win10 - v1803 - changed the permissions and security
surrounding "devices" including the microphone. You have to change setting to
allow the "microphone" to access apps since Windows thinks all sound cards are
microphones. This little "upgrade" drove me nuts for days before so
--- Original Message --
From: "Richard Ferch"
To: "Jim Sheldon"
Cc: elecraft@mailman.qth.net
Sent: 6/25/2018 10:39:18 AM
Subject: Re: Re[2]: [Elecraft] FT8 using internal USB sound on the K3S
You mean that in WSJT-X's Settings window under the Audio tab, it won't
dio to
> the K3S and won't until I get the audio input working in receive first.
>
> Thanks,
>
> Jim - W0EB
>
> -- Original Message --
> From: "Richard Ferch"
> To: elecraft@mailman.qth.net
> Sent: 6/25/2018 10:16:11 AM
> Subject: Re: [Elecra
heldon" ; "elecraft@mailman.qth.net"
Sent: 6/25/2018 10:23:42 AM
Subject: Re: [Elecraft] FT8 using internal USB sound on the K3S
Jim,
Do you have WSJT-X configured to use the USB CODEC for both input and
output?
Do you have anything plugged into the LINE IN jack on the back of the
K3S?
- Original Message --
From: "Richard Ferch"
To: elecraft@mailman.qth.net
Sent: 6/25/2018 10:16:11 AM
Subject: Re: [Elecraft] FT8 using internal USB sound on the K3S
It sounds as though you are putting the rig into USB mode. I believe
you
would be better off putting the rig into DATA A. S
Subject: Re[2]: [Elecraft] FT8 using internal USB sound on the K3S
Nope, it's in DATA A. WSJT-X's CAT control works fine with the K3S,
setting frequency and DATA mode to DATA A (I forgot to mention that,
sorry). The problem has NO relation to the filter controls or any of
the o
Jim,
Do you have WSJT-X configured to use the USB CODEC for both input and
output?
Do you have anything plugged into the LINE IN jack on the back of the
K3S? Anything plugged in there will take priority over the internal
soundcard.
Is the MIC SEL menu set to LINE?
73,
Don W3FPR
On 6/25/20
It sounds as though you are putting the rig into USB mode. I believe you
would be better off putting the rig into DATA A. Set the rig's mode to DATA
and the data submode to DATA A. With the rig in DATA A, adjust the K3's
filter controls to put the Lo-Cut at around 0.20 and the Hi-Cut around 2.8.
Wi
Are you in DATA mode? MIC SEL should be Line In.
MIC (Line In ) level abt 30.
Bob, K4TAX
Sent from my iPhone
> On Jun 25, 2018, at 9:33 AM, Jim Sheldon wrote:
>
> For some reason I can't get WSJT-X to pull the input sound or send output
> sound to the K3S through the USB port. I know I h
For some reason I can't get WSJT-X to pull the input sound or send
output sound to the K3S through the USB port. I know I have some K3S
parameter(s) set wrong, but so far I haven't been able to figure out
which ones or how to change them.
I had this working before so not sure what I did to ch
11 matches
Mail list logo
