Sometimes I have found that when starting FlDigi, the cat linkage doesn't
work on FLDigi's start-up. I then have to go to FLDigi's menu and do the
following:
Configure-->Rig Control-->RigCat tab --> Initialize button. If the button
doesn't turn red, you should be able to see changes on the rig
Hi Brian,
Thanks for the reply. I had found that "howto" file, but can't make
much sense of it. The current K3.xml file relays changes between the
rig and the two little blue boxes under the frequency display, but these
changes are not reflected in the fldigi operate mode, nor do changes in
Hi George,
Do you mean DATA/USB/CW/etc. mode information, or something else? I
have fldigi 3.22 displaying DATA mode during normal operation, using
Rigcat and K3.XML as the rig control template. Are you saying you can't
see a mode change after accessing the drop-down (next to the main
Yes, I have had success with my KX3 and FlDigi by modifying the rig xml for
the K3 as a starting point. Here is the howto:
http://www.w1hkj.com/FldigiHelp/rig_xml_page.html
It took me a little longer to figure out the xml file's relationships, but
this howto didn't exist then.
Once you see the
Hi gang,
I am running fldigi with my K3, and everything works as indicated in the
manual. It would be useful if fldigi was able to poll the K3 for mode
information, and set itself accordingly. I suspect that a modification
of the K3.xml file might accomplish this, but I don't know enough
5 matches
Mail list logo
