Yes, this is a known problem. For example, the driver starts
transmitting before the FA command is complete on the first attempt to
connect, whether or not a band change is involved. It's amazing that
no one caught this in beta tests.
73,
matt W6NIA
On Sat, 07 Jan 2012 02:07:58 -0500, you
On 1/7/2012 8:46 AM, Matt Zilmer wrote:
Yes, this is a known problem. For example, the driver starts
transmitting before the FA command is complete on the first attempt to
connect, whether or not a band change is involved. It's amazing that
no one caught this in beta tests.
That is truly
Good questions, Joe. I've never gotten an answer (and yes, I've asked
around).
matt
On Sat, 07 Jan 2012 10:17:57 -0500, you wrote:
On 1/7/2012 8:46 AM, Matt Zilmer wrote:
Yes, this is a known problem. For example, the driver starts
transmitting before the FA command is complete on the
: Matt Zilmer [mailto:mzil...@verizon.net]
Sent: Sunday, January 01, 2012 11:31 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3: data modes - bizarre behavior
In all this time with K3 #24, I've never been stymied by any issue
such as described below.
I'm a Navy-Marine Corps MARS member
]
Sent: Sunday, January 01, 2012 11:31 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3: data modes - bizarre behavior
In all this time with K3 #24, I've never been stymied by any issue
such as described below.
I'm a Navy-Marine Corps MARS member. We use RMS Express in the WL2K
system
W4GRJ wrote:
Just leave the K3 in USB, do not change to data mode. RMS Express will set to
the correct freq. You will not have to make any adjustments.
If this is correct, and RMS Express tunes to the correct frequency in
USB mode but not in DATA A mode, then there may be an error in RMS
Matt
I use Airmail with my K3 and an SCS Pactor modem to connect to the
Winlink system. Using the pre-defined settings in Airmail it works
perfectly to connect to any of the mail boxes within range, no
tweaking of the RIT, etc. needed.
It looks like RMS Express is the cause of the issue, which I
I use RMS Express Winmor, DSM780 FlDigi MT63, Airmail Pactor and MIL110A,
they all work perfect with the rig left in USB.
Jack
W4GRJ / AFA4DG
On Jan 2, 2012, at 3:43, Richard Ferch ve3...@storm.ca wrote:
W4GRJ wrote:
Just leave the K3 in USB, do not change to data mode. RMS Express will
Same here, installed RMS last weekend it worked fine in USB for winmor
also on my K3 first time.
Strange.
--
*Iain Haywood*
G4SGX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Yes, of course, but that is not in the least surprising. The question
is: Why doesn't RMS Express work properly in DATA A mode? This is
precisely the kind of application that DATA A was intended for.
73,
Rich VE3KI
On 02/01/2012 7:53 AM, W4GRJ wrote:
I use RMS Express Winmor, DSM780 FlDigi
...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Richard Ferch
Sent: Monday, January 02, 2012 9:13 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3: data modes - bizarre behavior
Yes, of course, but that is not in the least surprising. The question
is: Why doesn't
Subject: [Elecraft] K3: data modes - bizarre behavior
In all this time with K3 #24, I've never been stymied by any issue
such as described below.
I'm a Navy-Marine Corps MARS member. We use RMS Express in the WL2K
system on HF, running WL2K Winmor mode The software I have is version
1.1.3.0
the audio.
...bill nr4c
-Original Message-
From: Matt Zilmer [mailto:mzil...@verizon.net]
Sent: Sunday, January 01, 2012 11:31 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3: data modes - bizarre behavior
In all this time with K3 #24, I've never been stymied by any issue
I use Airmail and RMS Express and both work as they should in Pactor 1-4 mode.
RMS Express version is 1.1.3.0. Controller is a SCS DR-7800 P4 Dragon
I recommend to use DATA Mode in the K3 for Pactor.
DATA Mode should be set to DATA A, USB.
You should set RMS Express to use DATA USB.
You
In all this time with K3 #24, I've never been stymied by any issue
such as described below.
I'm a Navy-Marine Corps MARS member. We use RMS Express in the WL2K
system on HF, running WL2K Winmor mode The software I have is version
1.1.3.0.
I also use LP Bridge to create two COM ports: one
actual transmission freq is the sum of VFO
plus the audio.
...bill nr4c
-Original Message-
From: Matt Zilmer [mailto:mzil...@verizon.net]
Sent: Sunday, January 01, 2012 11:31 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3: data modes - bizarre behavior
In all this time with K3 #24
@mailman.qth.net
Subject: [Elecraft] K3: data modes - bizarre behavior
In all this time with K3 #24, I've never been stymied by any issue
such as described below.
I'm a Navy-Marine Corps MARS member. We use RMS Express in the WL2K
system on HF, running WL2K Winmor mode The software I have is version
of your radio. So you actual transmission freq is the sum of VFO
plus the audio.
...bill nr4c
-Original Message-
From: Matt Zilmer [mailto:mzil...@verizon.net]
Sent: Sunday, January 01, 2012 11:31 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3: data modes - bizarre behavior
: [Elecraft] K3: data modes - bizarre behavior
Matt,
It sounds like your software is trying to set the K3 to the channel
center frequency. Just as a guess, that might be SOP for government
gear, but not for most ham rigs which refer to the suppressed carrier
frequency..
73,
Don W3FPR
What Don is saying is certainly true for the UK military HF gear I have
used. Centre of channel is always 1500Hz higher than the suppressed
carrier frequency.
73 Stephen G4SJP
On 1 January 2012 19:48, Don Wilhelm w3...@embarqmail.com wrote:
snip
It sounds like your software is trying to set
is the sum of VFO
plus the audio.
...bill nr4c
-Original Message-
From: Matt Zilmer [mailto:mzil...@verizon.net]
Sent: Sunday, January 01, 2012 11:31 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3: data modes - bizarre behavior
In all this time with K3 #24, I've never
Matt,
Just leave the K3 in USB, do not change to data mode. RMS Express will set to
the correct freq. You will not have to make any adjustments.
Jack
W4GRJ / AFA4DG
On Jan 1, 2012, at 11:30, Matt Zilmer mzil...@verizon.net wrote:
In all this time with K3 #24, I've never been stymied by any
-Original Message-
From: Matt Zilmer [mailto:mzil...@verizon.net]
Sent: Sunday, January 01, 2012 11:31 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3: data modes - bizarre behavior
In all this time with K3 #24, I've never been stymied by any issue
such as described below
is the sum of VFO
plus the audio.
...bill nr4c
-Original Message-
From: Matt Zilmer [mailto:mzil...@verizon.net]
Sent: Sunday, January 01, 2012 11:31 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3: data modes - bizarre behavior
In all this time with K3 #24, I've never been
of VFO
plus the audio.
...bill nr4c
-Original Message-
From: Matt Zilmer [mailto:mzil...@verizon.net]
Sent: Sunday, January 01, 2012 11:31 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3: data modes - bizarre behavior
In all this time with K3 #24, I've never been stymied
Matt,
Did you make a typo on that MD; command - if that is really what is
being sent, that is a GET - it should be MD6; for normal sideband in
data mode. The rest all looks correct, but there may be some subtle
problem with the order in which the commands are sent.
The mystery deepens.
73,
26 matches
Mail list logo