Any and all with the 2 meter module;
After a longish wait, my K3 came back to my QTH, all the circuits
had been checked out, upgraded, revamped, firmware fine. I put it on
the desk, attached my antennas, then went to the 144 MHz band - all but
expecting to have it work like a dedicated 2
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Gil WA5YKK
Sent: Tuesday, July 27, 2010 11:02 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 144 repeater settings?
Any and all with the 2 meter module;
After
An appeal to anyone - I have my 2 meter module installed in my K3,
but the instruction manual leaves out the steps on how to set the works
up for repeaters and offsets, tone accesses. Does anyone have any idea
of where to find a logical sequence of steps to do the job, or is this a
case of
An appeal to anyone - I have my 2 meter module installed in my K3,
but the instruction manual leaves out the steps on how to set the works
up for repeaters and offsets, tone accesses.
Please see the FM Operation section in the K3 Owner's Manual.
73,
Lyle KK7P
I believe you will find what you need in the K3 ops manual, not the K144XV
manual.
Grant/NQ5T
On May 27, 2010, at 11:13 AM, Gil WA5YKK wrote:
An appeal to anyone - I have my 2 meter module installed in my K3,
but the instruction manual leaves out the steps on how to set the works
up
I'm sure glad you asked that question, Gil. I just got my 2m module in
today, and would have had to do the same!! How'd yours install and work??
73,
Don, WB5HAK
__
Elecraft mailing list
Home:
@mailman.qth.net
Subject: Re: [Elecraft] K3/144
Phil
IF you have the new version of SDR configured correctly, and that's the only
thing that changed, then the SDR programmer needs to find/fix the problem.
=-O
Did you have to enter any configuration settings in SDR, or did it pick up
your current ones
Help. Latest version of LP-pan and SDR. Clicked XTVR and extended the
frequency to 148. but it doesn't switch the K3. SDR version .92 works
perfectly Larry couldn't help either. Please, any help appreciated.
Phil
Philip LaMarche
LaMarche Enterprises, Inc
727-944-3226
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Phil
IF you have the new version of SDR configured correctly, and that's the
only thing that changed, then the SDR programmer needs to find/fix the
problem. =-O
Did you have to enter any configuration settings in SDR, or did it pick
up your current ones? In either case check there first.
73,
My beam is up and today the 10 watts in, 160 watts out amplifier arrived and
I'm anxious to get on 2 for those occasional openings. Antenna is at 85 ft.
Everyone have a wonderful weekend and TGIF.
Phil
Philip LaMarche
LaMarche Enterprises, Inc.
http://www.instantgourmetspices.com/
Guys,
This is just what I was waiting for, I'd love to have a K3 with 144
MHz build in.
vy 73 Eric PA3CEV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Eric Wösten PA3CEV wrote:
Guys,
This is just what I was waiting for, I'd love to have a K3 with 144
MHz build in.
Indeed :) Now how about 70MHz ?
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC HB9DRV-9 DX Clusters
Member RSGB, GQRP 9838, FISTS 14077 | K3 #455
On Thu, 14 May 2009 07:46:53 +0100, Ian Maude i...@gb7mbc.net wrote:
Eric Wösten PA3CEV wrote:
Guys,
This is just what I was waiting for, I'd love to have a K3 with 144
MHz build in.
Indeed :) Now how about 70MHz ?
73 Ian
Or 70cm?
Tom, N5GE
K3 #806, K3 #1055
XV144, XV432
W1 and
14 matches
Mail list logo
